hi, the speedcam data is for which country ?
I have created 23 alert points (23 Category types) add-on for IGO Primo, it may work on other versions but not been tested on those. The screen size is for 480x272 but again easily adapted for other sizes.
The alert types (Categories) are as follows:-
Type (Category) 1 - Fixed Speed Cameras
Type (Category) 2 - Red Light/Speed Camera
Type (Category) 3 - Red Light Camera
Type (Category) 4 - Average Speed Camera
Type (Category) 5 - Mobile Speed Camera
Type (Category) 6 - Railway Crossing
Type (Category) 7 - Bus Lane Camera
Type (Category) 8 - Accident Blackspot
Type (Category) 9 - School Zone
Type (Category) 10 - Variable Speed Camera (these are cameras that speed is NOT fixed so could change from 30 to 50 or reverse and you may be unaware - you get them for example on M6 near Birmingham and also M25)
Type (Category) 12 - Toll Booth
Type (Category) 13 - Hospital Zone
Type (Category) 14 - Fire Station
Type (Category) 15 - Congestion Charge Zone
Type (Category) 16 - Tunnel
Type (Category) 17 - Low Emission Zone
Type (Category) 20 - Low Bridge
Type (Category) 21 - Width Restriction (useful for larger vehicles so gives warning prior to being stuck)
Type (Category) 22 - Weight Restriction (useful for larger vehicles so gives warning prior to being stuck)
Type (Category) 23 - Speed Bumps
Type (Category) 25 - D2S Speed Camera (A new kind of camera in the UK, you get two lines on road and by time you see them its too late, no signs are displayed for this type of camera)
Type (Category) 26 - Electric Recharge Station (for electric cars)
Type (Category) 27 - Dangerous Bend
Type (Category) 28 - ADR Restrictions (useful for vehicles who carry hazardous goods, gives warning prior to restriction so can divert)
Installation Instructions:
UX File speedcam_extra.zip (copy this directly into your ux folder or create a folder called "ux" in your igo root folder), do not unzip it. You do NOT have to touch your sys.txt or any other file.
[Only registered and activated users can see links. ]
any or all features above can be disabled by going into settings/Sounds and Warnings/Alert Point Settings/Alert Types and change things there.
Each alert point data is in individual files to make it easier to update, just copy the speedcam_* files into your speedcam folder, and when you switch on your unit it will combine them all.
[Only registered and activated users can see links. ]
The data files are as follows:-
SpeedCam_1.txt - Full Europe Fixed Speed Cameras (04/04/2014)
SpeedCam_2.txt - Full Europe Red/Speed Cameras (04/04/2014)
SpeedCam_3.txt - Full Europe Red Light Cameras (04/04/2014)
SpeedCam_4.txt - Average Speed Cameras (UK Only Last Update 02/2014)
SpeedCam_5.txt - Mobile Speed Cameras (Full Europe Last Update 02/2014)
SpeedCam_6.txt - Railway Crossings (UK Only - data provided by National Rail)
SpeedCam_7.txt - Bus Lane Cameras (UK Only - data incomplete)
SpeedCam_8.txt - Accident Blackspots (Worldwide Last Update 02/2014)
SpeedCam_9.txt - School Zone (Worldwide Last Update 01/2014)
SpeedCam_10.txt - Variable Speed Camera (Last Update 02/2014)
SpeedCam_12.txt - Toll Booth (Full Europe Last Update 02/2014)
SpeedCam_13.txt - Hospital Zone (UK Only Last Update 12/2013)
SpeedCam_14.txt - Fire Station (UK Only Last Update 12/2013)
SpeedCam_15.txt - Congestion Charge Zone (London UK Only Last Update 02/2014)
SpeedCam_16.txt - Tunnel
SpeedCam_17.txt - London Low Emission Area (UK Only - Data Provided by TFL)
SpeedCam_20.txt - Low Bridge (UK Only Last Update 12/2013)
SpeedCam_21.txt - Width Restriction (UK Only Last Update 12/2013)
SpeedCam_22.txt - Weight Restriction (UK Only Last Update 12/2013)
SpeedCam_23.txt - Speed Bumps
SpeedCam_25.txt - D2S Speed Camera (UK Only Last Update 12/2013)
SpeedCam_26.txt - Electric Recharge Station (UK Only Last Update 12/2013)
SpeedCam_27.txt - Dangerous Bend
SpeedCam_28.txt - ADR Restriction (UK Only Last Update 12/2013)
If you wish to update or replace data open the relivavent files and replace the type number to the correct one.
Example:
X,Y,TYPE,SPEED,DIRTYPE,DIRECTION
-2.385016,52.787706,25,55,0,0
If you wish to add new bridges replace the ,25, with ,20,
Last edited by D.I.I.; 22nd January 2015 at 10:08 AM.
hi, the speedcam data is for which country ?
The two zip files are corrupted. Can you reup? Thanks
It's because you use old IE, use Chrome or a download manager.
You have to navigate to get to the good.
Galaxy S5 Kitkat 4.4.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / Nuvi 66 / Oregon 600
are these types/categories used only in UK? they don't match up with values posted by others (esp 10,16,17,20-28)
"The screen size is for 480x272 but again easily adapted for other sizes."
Can you please tell us how to convert for 800x480 thanks
Bookmarks