Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Page 1 of 3 123 LastLast
Results 1 to 10 of 26
  1. #1
    ☼ADMIN☼
    catymag's Avatar
    Join Date
    Nov 2007
    Location
    Light Side
    Posts
    15,280
    Rep Power
    1844

    Default Garmin Oregon 200, 300, 400i, 400c, 400t & Garmin Oregon x50 (450 and 550) Software Summary

    Oregon x50 Software Summary




    NOTE: Garmin deleted all the old sw versions, so links from now are dead.
    You can use links provided here or ask me if they'r dead


    Current Version Info:
    Code:
    Please Login or Register to see the links

    Oregon x50 version history

    Oregon x50 (WebUpdater) software version 6.40
    Code:
    Please Login or Register to see the links
    Changes made from version 6.30 to 6.40:
    Added support for VIRB Remote. Setup > Main Menu to add. See TrailTech Blog for more information:
    Code:
    Please Login or Register to see the links
    Fixed issue with route calculations always avoiding seasonally closed roads


    Oregon x50 (WebUpdater) software version 6.30
    Code:
    Please Login or Register to see the links
    Changes made from version 6.20 to 6.30:
    Added support for additional ActiveRouting cartography
    Fixed issue with incorrect letter capitalization of certain map points
    Fixed issue where wirelessly transmitting a geocache to another device would result in an error message when trying to view the received geocache in BaseCamp


    Oregon x50 (WebUpdater) software version 6.20
    Code:
    Please Login or Register to see the links
    Changes made from version 6.10 to 6.20:
    ◦Improved map performance in densely-populated urban areas.
    ◦Fixed trail searching when using multiple active routing maps.
    ◦Fixed issue with saving a track's 'show on map' status across a power cycle.
    ◦Fixed issue with displaying tracks on the map after performing an area calculation.
    ◦Fixed potential shutdown when viewing certain tracks or routes in German or Russian.
    ◦Fixed minor graphical issue with certain data fields on the map.

    Oregon x50 (WebUpdater) software version 6.10
    Code:
    Please Login or Register to see the links
    Changes made from version 6.00 to 6.10:
    ◦Improved ascent and descent calculations.

    Oregon x50 (WebUpdater) software version 6.00
    Code:
    Please Login or Register to see the links
    Changes made from version 5.90 to 6.00:
    Improved map drawing at low zoom levels.
    Fixed inability to edit archived tracks.
    Fixed ability to use NMEA depth for waypoints and tracks.
    Fixed display of geocache coordinates with non-default map datum.
    Fixed potential issue with reporting tempe temperature data.
    Fixed overlapping position text for right to left languages.

    Oregon x50 (WebUpdater) software version 5.80
    Code:
    Please Login or Register to see the links
    Changes made from version 5.50 to 5.80:
    Added new route activity types and improved BaseCamp compatibility. See TrailTech ([Only registered and activated users can see links. ]) for more information.
    Added support for Kenwood NMEA Waypoint Sentence
    Improved GPS response at low speeds
    Fixed issue with preserving routes imported from BaseCamp (identical maps required)
    Fixed Spell Search in German
    Fixed possible issue with Where To? > Address searching


    Oregon x50 software version 5.70
    Code:
    Please Login or Register to see the links
    Changes made from version 5.60 to 5.70:
    ◦Fixed an issue with the reporting of pressure from the barometric altimeter
    ◦Fixed possible issue with changing avoidance settings while actively routing


    Oregon x50 software version 5.60
    Code:
    Please Login or Register to see the links
    Changes made from version 5.50 to 5.60:
    ◦Added new route activity types and improved BaseCamp compatibility. See TrailTech ([Only registered and activated users can see links. ]) for more information.
    ◦Added support for Kenwood NMEA Waypoint Sentence
    ◦Improved GPS response at low speeds
    ◦Fixed issue with preserving routes imported from Basecamp (identical maps required)
    ◦Fixed Spell Search in German

    Oregon x50 software version 5.57 Beta
    Code:
    Please Login or Register to see the links
    Changes made from version 5.50 to 5.57:
    ◦Added new route activity types
    ◦Added support for Kenwood NMEA Waypoint Sentence
    ◦Improved GPS response at low speeds
    ◦Fixed issue with preserving routes imported from Basecamp (identical maps required)
    ◦Fixed Spell Search in German


    Oregon x50 (WebUpdater) software version 5.50
    Code:
    Please Login or Register to see the links
    Changes made from version 5.40 to 5.50:
    Improved GPS response at low speeds.
    Fixed potential issue when exiting geocache descriptions

    Oregon x50 (WebUpdater) software version 5.40
    Code:
    Please Login or Register to see the links
    or
    [Only registered and activated users can see links. ]
    Changes made from version 5.30 to 5.40:
    Added Geocaching with Photos
    Fixed potential naming issues with imported routes from BaseCamp
    Fixed issue with 'Hut' point type in TOPO Australia & New Zealand maps
    Fixed issue with magnetic north offset when projecting a waypoint
    Fixed issue with track log recording while using the stopwatch
    Fixed mass storage issue when used without batteries

    Oregon x50 (WebUpdater) software version 5.30
    Code:
    Please Login or Register to see the links
    Changes made from version 5.20 to 5.30:
    Added Geocaching with Photos
    Fixed potential naming issues with imported routes from BaseCamp
    Fixed issue with 'Hut' point type in TOPO Australia & New Zealand maps
    Fixed issue with magnetic north offset when projecting a waypoint
    Fixed issue with track log recording while using the stopwatch

    Oregon x50 software version 5.20
    Changes made from version 5.10 to 5.20:
    Fixed potential power-up issue introduced in previous release.

    Oregon x50 software version 5.10
    Changes made from version 5.00 to 5.10:
    Improvements to the geocaching experience. See TrailTech
    Fixed a potential hang on startup when importing large numbers of waypoints, tracks, routes, or geocaches
    Fixed issue with very long geocache descriptions
    Fixed shutdown when reviewing certain geocache descriptions
    Fixed issue where the photo orientation would be incorrect in the photo viewer
    Fixed potential shutdown while scrolling through Garmin Connect photos
    Fixed issue where some auto-archived tracks would be named in English regardless of user language
    Fixed bug that could cause some geocaches to not import


    Oregon x50 (WebUpdater) software version 5.00
    Changes made from version 4.80 to 5.00:
    Modified default map trails to appear as dashed red lines
    Fixed issue where geocache icons would sometimes not draw on the map while using Garmin GB Discoverer™ maps



    Oregon x50 (WebUpdater) software version 4.80
    changelog is the same than for 4.70

    Oregon x50 software version 4.70
    Changes made from version 4.50 to 4.70:
    Added support for advanced geocache logging with OpenCaching.com. See TrailTech
    Fixed issue with multilingual custom POI files
    Notes:
    Important steps for future BaseCamp Compatibility:
    If you are a user of BaseCamp now, or plan to be in the future, you must follow these steps to ensure your data is protected during this software update:
    Connect your handheld unit to a computer and launch BaseCamp. Transfer all tracks, routes and waypoints to BaseCamp.
    Delete the /Garmin/GPX folder from the handheld's mass storage.
    Update the handheld's software via WebUpdater and reboot the handheld.
    Reconnect the handheld to a computer and transfer your data from BaseCamp back to the handheld.

    Oregon x50 software version 4.50
    Changes made from version 4.20 to 4.50:
    Updated magnetic Earth field data
    Improved GPS performance
    Improved support for BirdsEye™ Satellite Imagery (each provider's imagery can be configured independently)
    Increased the maximum number of supported JNX files to 250 from 200
    Fixed issues with WAAS/EGNOS
    Fixed issue with track navigation sometimes not adding waypoints to the Active Route list
    Fixed issue with MPC map labels disappearing
    Fixed shutdown on the map page when you have a geocache dashboard active and return after pressing the geocache name
    Fixed issue with moon not showing on sun and moon page
    Fixed issue with photo viewer not displaying correctly
    Fixed issue with progress bar displaying properly on power up
    Fixed issue with waypoint distances showing significantly off in the waypoint manager
    Fixed issue with 3D view
    Fixed issue with track navigation not adding waypoints to the Active Route list when they are exactly equal to a track point
    Fixed shutdown when more than the maximum number of JNX files were present
    Fixed 'Search Near' functionality on Hunt & Fish and Sun & Moon pages
    Fixed shutdown related to topographical maps and land cover text size
    Fixed shutdown associated with certain custom POI files
    Fixed Glide Ratio to Destination field
    Fixed problem with profiles and the fields on the map page
    Fixed an issue with magnetic north reference and waypoint headings
    Fixed shutdown on the map screen when a waypoint was being moved to the same location as a geocache or other POIs
    Fixed an issue with archived tracks not displaying properly
    Fixed an issue with having too many custom symbols on the device
    Fixed an issue with renaming a waypoint immediately after creating it
    Modified the 'Arriving at Destination' message banner so that it no longer appears when navigating to a geocache


    4.49 (beta)
    Fixed issues relating to WAAS performance.
    Fixed issue where the device would not regain a GPS signal after losing the GPS signal in a tunnel.
    Fixed shutdown on the map screen when a waypoint was being moved to the same location as a geocache or other POIs.
    Fixed an issue where the enabled/disabled option for custom maps could not be changed when two or more BirdsEye™ Satellite Imagery providers were on the device.
    Fixed an issue where the device would not beep when approaching a destination while routing off-road.

    4.47 (beta)

    Fixed shutdown when selecting an option on the 'Where To?' page that was introduced with 4.45 beta
    Fixed ANT connectivity issues that were introduced with 4.45 beta
    Fixed the slow rendering time of the 'About' page that was introduced with 4.45 beta
    Fixed a bug introduced in 4.45 beta where JNX settings were not being saved for each profile
    Fixed an issue with magnetic north reference and waypoint headings

    4.45 (beta)
    Improved GPS performance
    Improved JNX file handling
    Improved the usability of the main menu setup page
    Increased maximum number of supported JNX files to 250 from 200
    Fixed shutdown when more than the maximum number of JNX files were present
    Fixed 'Search Near' functionality on Hunt & Fish and Sun & Moon pages
    Fixed shutdown related to topographical maps and land cover text size
    Fixed shutdown associated with certain custom POI files
    Fixed Glide Ratio to Destination field
    Fixed problem with profiles and the fields on the map page

    4.32 (beta)
    Fixed issues with :
    WAAAS/EGNOS, Moon not showing on sun and moon page
    photo viewer not displaying correctly, Progress bar displaying properly on power up, 3D view, Track navigation not adding waypoints to the Active Route list,
    Waypoint distances showing significantly off in the waypoint manager

    4.31 (beta)
    Updated magnetic Earth field data
    Improved GPS performance
    Fixed issue with track navigation sometimes not adding waypoints to the Active Route list
    Fixed issue with MPC map labels disappearin
    Fixed shutdown on the map page when you have a geocache dashboard active and return after pressing the geocache name

    4.20

    Fixed shutdown related to the current track that occurred after updating the software
    Fixed a hang that occurred when a unit had 1000 auto-named waypoints


    Software 4.00
    •Added support for Chirp™.
    •Fixed problem with certain custom maps.
    •Fixed problem with certain JPEG images.
    •Fixed issue with Sight 'N Go and user north reference.
    •Fixed potential hang on start up after an upgrade.

    Software 3.90
    •Fixed issue while using spell search in route planner.
    •Fixed issue on 3D View where vehicle could move after using the map.
    •Fixed issue where tracks could not be disabled from the map.
    •Fixed issues with odometer distance.
    •Fixed shutdown while panning the map for extended periods of time.

    Software 3.80
    •Added ability to move waypoints using the map
    •Added ability to set user declination direction
    •Added Automatic Shaded Relief option
    •Added brightness adjustments for BirdsEye imagery
    •Added display color to track gpx files
    •Added Geocache filtering. Select Setup > Geocaches to add custom filters
    •Added import indicator for gpx files
    •Added multicaching support
    •Added periodic track archiving
    •Added track review page improvements
    •Improved keyboard responsiveness
    •Improved WAAS performance
    •Fix hang searching for POI
    •Fixed elevation profiles to always use the most detailed DEM data loaded
    •Fixed future plot with tracks that have no elevations in them
    •Fixed issue with calculator % function
    •Fixed issue with map POI's showing twice for a single point
    •Fixed issue with Oblique Mercator User grid
    •Fixed issue with stuck route button.
    •Fixed occasional shutdowns
    •Fixed shutdown on About Page
    •Fixed spot sounding display on certain maps
    •Updated map review of tracks and routes. The distance shown is now the distance along the route or track.

    Software 3.74 (beta)
    •Added multicaching support.
    •Added display color to track gpx files.
    •Added ability to set user declination direction.
    •Improved accuracy of trip odometer.
    •Fixed occasional shutdowns.
    •Fixed issue with stuck route button.
    •Fixed issue with Oblique Mercator User grid.

    Software 3.71 (beta)
    •Added ability to move waypoints using the map.
    •Added display color to track gpx files.
    •Added import indicator for gpx files.
    •Fixed ability to select active track color.
    •Fixed issue reviewing tracks with only one point.
    •Fixed issue with missing or extra track segments on the map.
    •Fixed issue with duplicate tracks.

    Software 3.61 (beta)
    •Added Track Archiving
    •Added Automatic Shaded Relief option. This setting will disable Shaded Relief when zoomed in.
    •Updated map review of tracks and routes. The distance shown is now the distance along the route or track.
    •Added additional data to track and route review pages.
    •Improved map drawing speed.


    Software 3.52 (beta)
    •Added geocache filtering. Select Setup > Geocaches to add custom filters.
    •Improved keyboard responsiveness.
    •Fix hang searching for POI.

    Software 3.51 (beta)
    •Added brightness adjustments for BirdsEye imagery.
    •Improved WAAS performance.
    •Improved speed, trip odometer, and stopped/moving time data fields while in low velocity.
    •Fixed issue with map POI's showing twice for a single point.
    •Fixed elevation profiles to always use the most detailed DEM data loaded.
    •Fixed future plot with tracks that have no elevations in them.
    •Fixed issue with calculator % function.

    Software 3.50
    •Only available factory loaded on new x50 units.
    •Not available via WebUpdater.
    •Obtainable from Garmin Support with the serial number of a unit originally loaded with this version.
    •Unknown differences between this version and the 3.40 version.
    •Believed to have been released to support a minor hardware change.

    Software 3.40
    •Added BirdsEye control to Profiles.
    •Fixed map display problems.

    Software 3.30
    •Added support for Garmin BirdsEye.
    •Added mmHg pressure units.
    •Added support for Riyadh time zone.
    •Added option to calibrate screen under Setup->Display.

    Software 3.26 (beta)
    •Added ability to change active track color.
    •Added custom waypoint and geocache symbols.
    •Added track archive options.
    •See the Trailtech Blog for details on track archiving and custom symbols.

    Software 3.20
    •Fixed issue with units getting stuck in demo mode.
    •Fixed color issues with GB Discoverer and Custom Maps.
    •Fixed issue where portions of GB Discoverer Maps would disappear.

    Software 3.13 (beta)
    •Fixed issue with units getting stuck in demo mode.
    •Fixed color issues with GB Discoverer and Custom Maps.

    Software 3.10
    •Increased the map drawing range to allow maps to draw farther south.
    •Corrected issue with route line sometimes not drawing.
    •Corrected issues with marine POI.
    •Corrected issues with GB Discoverer maps.
    •Corrected issues with possible corrupted profile showing on the Profile Change page.
    •Corrected issue with project waypoint bearing sometimes not showing the input value.

    Software 3.00
    •Added ability to view elevation plot of upcoming active route or currently navigated track in blue.
    •Added display of icons to the lists in Where To? > Waypoints and the Geocaching application.
    •Added phone numbers when available to POI review pages.
    •Added Compass, Stopwatch, Active Geocache, and Elevation Plot dashboard options.
    •Introduced dashboard options to the Compass and Map pages.
    •Improved track navigation.

    Software 2.81 (beta)
    •Added date/time to Elevation Plot page when plot future is active.
    •Added display of icons to the lists in Where To? > Waypoints and the Geocaching application.
    •Added phone numbers when available to POI review pages.
    •Fixed issue where vehicle position would switch between actual and on-road locations.

    Software 2.71 (beta)
    •Added ability to view elevation plot of upcoming active route or currently navigated track in blue.
    •Added Compass, Stopwatch, Active Geocache, and Elevation Plot dashboard options.
    •Introduced dashboard options to the Compass and Map pages.
    •Improved track navigation.

    Software 2.70
    •Added profile support for Garmin Custom Maps.
    •Fixed lockup while using GB Discoverer maps.

    Software 2.60
    •Added support for Garmin Custom Maps
    •Added heading to geotagged photo EXIF information (see GPSImgDirection and GPSImgDirectionRef tags)
    •Improved along road routing performance
    •Improved support for importing geotagged photos to various desktop applications
    •Corrected issues causing some geotagged photos to be drawn at incorrect location on the map
    •Added earthcache geocache icon

    Software 2.51 (beta)
    •Added support for Garmin Custom Maps. See Garmin's blog post about this new feature at
    garmin.blogs

    Software 2.30
    •Added LKS92 map datum
    •Added GPS firmware 3.70
    •Added support for GPI Routes
    •Added thumbnail to camera page for quick review/deletion of most recently created photo
    •Added estimation of the number of remaining photos that the unit can take
    •Improved compass responsiveness
    •Fixed possible shutdown from low alkaline batteries when on camera page
    •Fixed possible shutdown due to deleting a waypoint while panning on the map page
    •Fixed issue where multiple GB Discoverer maps would not draw
    •Fixed issue with the address wizard not searching in the correct city
    •Fixed issue with backlight timer not functioning properly
    •Fixed user heading setting for mils so that all applicable headings are displayed with the correct heading format

    Software 2.20
    •Released on units shipping from Garmin.
    •No release notes available.
    •Not available as a download.

    Software 2.10
    •Initial product release on Garmin 550t.
    •No release notes available.
    •Not available as a download.

    DOWNLOADS:
    [hide]
    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]
    [/hide]

    Links ,if nobody downloads, expire, if you need a file post here or send me a pm
    thanks
    Attached Files Attached Files
    Last edited by Neil; 21-08-2013 at 08:01 AM. Reason: Added v6.40
    Garmin Oregon 200, 300, 400i, 400c, 400t & Garmin Oregon x50 (450 and 550) Software Summary
    [Only registered and activated users can see links. ] - [Only registered and activated users can see links. ]

    Galaxy SII Jelly Bean 4.1.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / GPSMAP 62st / Oregon 600

  2.    Advertissements


  3. #2
    ☼ADMIN☼
    catymag's Avatar
    Join Date
    Nov 2007
    Location
    Light Side
    Posts
    15,280
    Rep Power
    1844

    Default

    Oregon software versions history


    Change History




    Changes made from version 4.10 to 4.20:
    Updated magnetic Earth data
    Improved GPS performance
    Improved support for BirdsEye™ Satellite Imagery (each provider's imagery can be configured independently)
    Increased the maximum number of supported JNX files to 250 from 200
    Fixed issues with WAAS/EGNOS
    Fixed issue with track navigation sometimes not adding waypoints to the Active Route list
    Fixed issue with MPC map labels disappearing
    Fixed shutdown on the map page when you have a geocache dashboard active and return after pressing the geocache name
    Fixed issue with photo viewer not displaying correctly
    Fixed issue with 3D view
    Fixed issue with track navigation not adding waypoints to the Active Route list when they are exactly equal to a track point
    Fixed shutdown when the device had more than the maximum number of JNX files on it
    Fixed shutdown related to topographical maps and land cover text size
    Fixed shutdown associated with certain custom POI files
    Fixed Glide Ratio to Destination field
    Fixed an issue related to adding a geocache as a point in a route
    Fixed an issue with magnetic north reference and waypoint headings
    Modified the 'Arriving at Destination' message banner so that it no longer appears when navigating to a geocache

    Changes made from version 4.17 to 4.18:
    Fixed issues relating to WAAS performance.
    Fixed issue where the device would not regain a GPS signal after losing the GPS signal in a tunnel.
    Fixed an issue where the enabled/disabled option for custom maps could not be changed when two or more BirdsEye™ Satellite Imagery providers were on the device.

    Software 4.17 (beta)
    •Fixed shutdown when selecting an option on the 'Where To?' page that was introduced with 4.16 beta
    •Fixed ANT connectivity issues that were introduced with 4.16 beta
    •Fixed the slow rendering time of the 'About' page that was introduced with 4.16 beta
    •Fixed a bug introduced in 4.16 beta where JNX settings were not being saved for each profile
    •Fixed an issue with magnetic north reference and waypoint headings
    Software 4.16 (beta)
    •Improved GPS performance
    •Improved JNX file handling
    •Improved the usability of the main menu setup page
    •Increased maximum number of supported JNX files to 250 from 200
    •Fixed shutdown when unit had more than the maximum number of JNX files on it
    •Fixed shutdown related to topographical maps and land cover text size
    •Fixed shutdown associated with certain custom POI files
    •Fixed Glide Ratio to Destination field
    •Fixed an issue related to adding a geocache as a point in a route
    Software 4.12 (beta)
    •Fixed issues with WAAAS/EGNOS
    •Fixed issue with photo viewer not displaying correctly
    •Fixed issue with 3D view
    •Fixed issue with track navigation not adding waypoints to the Active Route list when they are exactly equal to a track point
    Software 4.11 (beta)
    •Updated magnetic Earth field data
    •Improved GPS performance
    •Fixed issue with track navigation sometimes not adding waypoints to the Active Route list
    •Fixed issue with MPC map labels disappearing
    •Fixed shutdown on the map page when you have a geocache dashboard active and return after pressing the geocache name
    Software 4.10
    •Added support for Chirp™ (Oregon 300, Oregon 400).
    •Fixed problem with certain custom maps.
    Software 4.00
    •Fixed issue on 3D View where vehicle could move after using the map.
    •Fixed issue on map page where back button would jump to the main menu.
    •Fixed issues with odometer distance.
    •Fixed shutdown while panning the map for extended periods of time.
    Software 3.90
    •Added ability to set user declination direction
    •Added Automatic Shaded Relief option
    •Added brightness adjustments for BirdsEye imagery
    •Added Geocache filtering. Select Setup > Geocaches to add custom filters
    •Added multicaching support
    •Improved WAAS performance
    •Fixed elevation profiles to always use the most detailed DEM data loaded
    •Fixed issue with calculator % function
    •Fixed issue with map POI's showing twice for a single point
    •Fixed issue with Oblique Mercator User grid
    •Fixed occasional shutdowns
    •Fixed spot sounding display on certain maps
    Software 3.85 (beta)
    •Added multicaching support.
    •Added Automatic Shaded Relief option.
    •Added ability to set user declination direction.
    •Improved accuracy of trip odometer.
    •Fixed occasional shutdowns.
    •Fixed issue with Oblique Mercator User grid.
    Software 3.82 (beta)
    •Added Geocache filtering. Select Setup > Geocaches to add custom filters.
    •Fixed issue syncing with BaseCamp.
    Software 3.81 (beta)
    •Added brightness adjustments for BirdsEye imagery.
    •Improved WAAS performance.
    •Improved speed, trip odometer, and stopped/moving time data fields while in low velocity.
    •Fixed issue with map POI's showing twice for a single point.
    •Fixed elevation profiles to always use the most detailed DEM data loaded.
    •Fixed issue with calculator % function.
    Software 3.80
    •Added BirdsEye control to profiles.
    •Added screen calibration option to Oregon 200.
    •Fixed issue changing marine modes.
    •Fixed map display problems.
    Software 3.70
    •Added support for Garmin BirdsEye .
    •Added mmHg pressure units.
    •Added ability to change active track color.
    •Added option to calibrate screen under Setup->Display.
    •Added custom waypoint symbol and geocache symbol support.(Seems to be wrong information that this feature is included in software 3.70. According to Garmin tech support there are currently no plans to add this feature to the x00 units)
    •Corrected issue with GPS acquisition on certain units.
    Software 3.60
    •Increased the map drawing range to allow maps to draw farther south.
    •Corrected issue with route line sometimes not drawing.
    •Corrected issues with marine POI.
    •Corrected issues with GB Discoverer maps.
    •Corrected issue with project waypoint bearing sometimes not showing the input value.
    Software 3.50
    •Added ability to view elevation plot of upcoming active route or currently navigated track in blue.
    •Added display of icons to the lists in Where To? > Waypoints and the Geocaching application.
    •Added phone numbers when available to POI review pages.
    •Added Compass, Stopwatch, Active Geocache, and Elevation Plot dashboard options.
    •Introduced dashboard options to the Compass and Map pages.
    •Improved track navigation.
    Software 3.42 (beta)
    •Added date/time to Elevation Plot page when plot future is active.
    •Added display of icons to the lists in Where To? > Waypoints and the Geocaching application.
    •Fixed issue where vehicle position would switch between actual and on-road locations.
    •Fixed issue where searching for a geocache from the Geocaching-Active * widget would return to the map page without ever giving the option to navigate to the geocache.
    Software 3.41 (beta)
    •Added ability to view elevation plot of upcoming active route or currently navigated track in blue.
    •Added Compass, Stopwatch, Active Geocache, and Elevation Plot dashboard options.
    •Introduced dashboard options to the Compass and Map pages.
    •Improved track navigation.
    Software 3.40
    •Added profile support for Garmin Custom Maps
    •Fixed lockup while using GB Discoverer maps
    Software 3.30
    •Added support for Garmin Custom Maps
    •Improved along road routing performance
    Software 3.22 (beta)
    •Added support for Garmin Custom Maps. See our blog post about this new feature at

    Software 3.2
    •Added LKS92 map datum
    •Added support for GPS firmware 3.70
    •Added support for GPI routes
    •Improved compass responsiveness
    •Fixed potential shutdown related to drawing 32-bit map points
    •Fixed potential issues during power on.
    Software 3.15 (beta)
    Recommended. GPS Firmware update introduced in 3.12 has been very accurate and tracklogs are much less noisy. Issues introduced in 3.12 and 3.13 have been fixed in this release which has been very stable.
    •Added LKS92 map datum
    •Fixed potential shutdown with custom POIs with custom symbols
    •Fixed issues with routing avoidances
    Software 3.13 (beta)
    Operation with compass has improved but still see shutoffs in automotive mode, particularly when displaying and navigating to custom POIs.
    •Fixed issues with thresholds used for auto compass switching.
    •Fixed issues with back button not appearing when editing a waypoint.
    Software 3.12 (beta)
    GPS Firmware changes to 3.70.
    •Improved GPS performance
    •Expanded support for custom POIs
    Software 3.10
    This release is very similar to 3.01 beta although there are three items included in Garmin's release notes for 3.10 that have not shown up in any prior beta:
    •Improved automatic route recalculation
    •Improved compass responsiveness in challenging GPS environment
    •Improved Spanish keyboard

    Garmin has also indicated that 3.01 and 3.10 are similar but not identical, citing differences in how GB Discoverer works with multiple map .img files. The complete list of release notes from Garmin is below.

    •Added Waypoint Averaging application •Added Sight 'N Go application for the Oregon 300/400i/400c/400t
    •Added Man Overboard application
    •Added big numbers option to the trip computer
    •Added customizable text to unit power-on screen (see \Garmin\startup.txt)
    •Added ability to load maps from any img file in the Garmin directory
    •Added new trip computer dashboards
    •Added option to display four configurable data fields on the map
    •Added 'search near' option to Geocaches search
    •Added the ability to view geocache logs separate from the description
    •Added ability to see a list of points from the map when several points are at the same location
    •Added ability to edit a waypoint from the waypoint review
    •Added support for Custom POI database and category selection
    •Added distance and bearing to point when reviewing a Custom POI
    •Added POI subcategories
    •Added change location to Sun and Moon
    •Added change location to Hunt and Fish
    •Added ability to force the Oregon into mass storage mode by holding the power button for 30 seconds while plugged into a USB cable
    •Added NMEA 9600 baud
    •Improved render quality of GB Discoverer maps and maps with satellite imagery
    •Improved map zooming
    •Improved map draw speed
    •Improved map panning and zooming when shaded relief is turned on
    •Improved automatic route recalculation
    •Improved Custom POI spell search
    •Improved Main Menu setup and added option to add and remove items
    •Improved readability of configurable data fields
    •Improved display of numeric degrees and mils
    •Improved GPS performance at slow speeds in tree cover
    •Improved compass responsiveness in challenging GPS environments
    •Improved battery gage for NiMH batteries
    •Improved stability when changing profiles
    •Improved Wherigo stability
    •Improved connection reliability with Spanner
    •Improved Spanish keyboard
    •Fixed airport points not displaying on the map
    •Fixed lockup when a search returns no results
    •Fixed elevation errors when reviewing a point other than a waypoint
    •Increased the number of waypoints viewable from the Waypoint Manager and Where To?>Waypoints
    Software 3.01 (beta)
    Recommended. This software appears to be stable and the power off issues from 2.99 are fixed . There were some initial reports of people who had problems with certain types of SD cards that were not formatted in FAT32 mode. I also think that some issues may arise when upgrading to 2.99 or 3.01 because people may have additional maps on their units which suddenly become active because of the "any name" map image file support. Before upgrading I would recommend two things

    1.Remove the SD Card
    2.Review and remove any .img files from your \Garmin directory that you don't want to be active. Any file with a .img extension will become an active map with this new software.

    After the upgrade reinsert the SD card and verify that the \Garmin directory on the SD card also has only the .img files you want to be active and verify that it is formated as a FAT32 filesystem.

    Garmin's release note.
    •Fixed improper shutdown
    Software 2.99 (beta)
    Not Recommended. The ability to have multiple map files on the unit is a great new feature, but unfortunately this release suffers from a crash when the unit is powered off. This crash seems to prevent some (most?) configuration changes from being saved across reboots. Given that there might be profile file corruption involved and I've heard of several of cases where people have bricked their units, I strongly recommend not upgrading to this release.

    •Added ability to load maps from any img file in the Garmin directory
    •Improved display of numeric degrees and mills
    •Improved Wherigo stability
    •Fixed elevation errors when reviewing a point other than a waypoint
    Software 2.98 (beta)
    Recommended. This is a stable release as the major issue associated with not locking satellites has been addressed by Garmin, but receiver accuracy issues still persist under tree cover and WAAS is not functional under tree cover. These lingering issues around GPS receiver performance are similar (maybe slightly better) than before the beta period started (i.e 2.8). As such I would recommend this beta to take advantage of the new features introduced during the beta period but do not expect significantly better GPS receiver performance.
    •Fixed not acquiring signal from all satellites in view
    •Changed EPE to be more dynamic in changing conditions
    Software 2.97 (beta)
    •Fixed lockup when a search returns no results
    •Fixed map stopped drawing while autorouting
    Software 2.96 (beta)
    Not recommended. There have been a number of stability issues in this release including:
    •Map page will freeze and display all white while autorouting in City Navigator. Power cycle (sometimes battery pull) required.
    •POI searches using spell search "ABC" frequently hang (spinning hourglass). Battery pull required.
    •All installed maps become enabled in a profile.
    •Switches between profiles sometimes appear hung (spinning hourglass) but actually happen.

    Same GPS software (2.80) as 2.94 and 2.95 so don't expect much improvement in WAAS or GPS accuracy for this release.

    New features are documented on GPSFix.

    •Added Waypoint Averaging application.
    •Added Sight 'N Go application for the Oregon 300/400i/400c/400t.
    •Added option to display four configurable data fields on the map.
    •Added customizable text to unit power-on screen (see \Garmin\startup.txt)
    •Added Man Overboard application
    •Added the ability to view geocache logs separate from the description
    •Increased the number of waypoints viewable from the Waypoint Manager and Where To?>Waypoints
    Software 2.95 (beta)
    Recommended, with cavets. Fixes map crash in 2.94, but GPS accuracy in this release and the previous 2.94 release is not as good as 2.93. Many users experienced significant GPS outages with this release which went away after several days. New features work well, so it will come down whether to can you live with less than perfect GPS accuracy to get access to the new features.
    •Added big numbers option to the trip computer
    •Added new trip computer dashboards
    •Added POI subcategories
    •Added 'search near' option to Geocaches search
    •Added change location to Sun and Moon
    •Added change location to Hunt and Fish
    •Fixed shutdown on the map
    Software 2.94 (beta)
    Recommend, with caveats. The major issues with 2.93 seem to have been addressed (battery management and random shutdowns), but a new issue has come up which causes the unit to shutoff in automotive mode when exiting the map page. If you are on 2.93 my feeling is that it is worth upgrading. 2.85 is still the most stable and reliable release. GPS performance in this release seem to be similar to 2.93.
    •Added ability to see a list of points from the map when several points are at the same location
    •Added ability to edit a waypoint from the waypoint review
    •Improved render quality of GB Discoverer maps and maps with satellite imagery
    •Improved Main Menu setup and added option to add and remove items.
    •Improved readability of configurable data fields
    •Fixed increased battery consumption and shutdowns in some units
    Software 2.93 (beta)
    Recommended, with caveats. The GPS reception improvements in this release seem real. The GPS is more responsive and the unit tracks well at slows speeds under cover. The issues with 2.86 seem to have been addressed. Tracklogs, however, have a lot of noise and are about 10-20% longer than they should be. Several issues with Custom POIs have been addressed and Garmin has improved Spanner support to include A301 for direct tracklog transfer using NMEA (PDF). The downside of this release is that some users are reporting decreased battery life and random power downs. It only seems to affect some Oregons and it is a very intermittent issue for people who are seeing it.
    •Improved GPS reception
    •Improved connection reliability with Spanner
    •Fixed GB Discoverer map not displaying while zooming (introduced in 2.86 beta)
    •Fixed roads not showing on maps with satellite imagery (introduced in 2.86 beta)
    •Fixed map with no DEM data drawing with a gray background (introduced in 2.86 beta)
    Software 2.86 (beta)
    Not recommended. Reported "GPS Accuracy" is smaller (i.e. better) in this release however track comparisons between this 2.86 and 2.85 or other GPS's seem to indicate a lot of track variability especially under tree cover. Unit feels much less averaged in this release but to an extent where you can swings on the map and compass page during navigation. Panning on the map page which runs into the zoom control results in a partially drawn map.
    •Added distance and bearing to point when reviewing a Custom POI
    •Improved map panning and zooming when shaded relief is turned on
    •Improved GPS performance at slow speeds in tree cover
    •Improved Custom POI database organization
    •Improved Custom POI spell search
    •Fixed possible shutdown when reviewing a Tide or Current Point using Where To?
    •Fixed possible shutdown when searching for an address and selecting Search All cities
    Software 2.90
    Recommended. Not available for download, Garmin provided this release on new units only but it appears to be very similar if not identical to beta 2.85.
    Software 2.85 (beta)
    Recommended. This "beta" version of Oregon software seems to be as stable or better than both 2.8 and 2.7. As such, I think it is worth taking if you are having the problems described below in 2.8 with profile changes or if you are a GB Discoverer user. If you are not having issues and aren't dying to get custom POI support or the battery meter improvements with this release I would hang tight until Garmin releases the non-beta version which I'm guessing will be shortly.

    The only issues I've experienced or read about include:
    •Loading a single custom POI database does not work properly
    •Potential slower response time from the touchscreen immediately after changing pages, this is most evident on the Alarm Clock page

    This beta release addresses issues introduced in 2.8 around the stability of profile changes. Battery gauge is more accurate with NiMH batteries and map redrawing has changed, although I don't believe it is significantly faster. Users report improvements with GB Discoverer, autorouting roads are no longer shown on top of raster maps and raster maps are easier to read. Custom POI database and category selection works although built in map POIs still do not display categories.

    •Added support for Custom POI database and category selection
    •Added ability to force the Oregon into mass storage mode by holding the power button for 30 seconds while plugged into a USB cable
    •Added NMEA 9600 baud
    •Improved map zooming
    •Improved raster map appearance
    •Improved map draw speed
    •Improved battery gauge for NiMH batteries
    •Improved stability when changing profiles
    •Fixed roads being shown on top of Garmin GB Discoverer maps
    •Fixed airport points not displaying on the map
    •Fixed some scan points not working properly with Garmin GB Discoverer maps
    •Fixed track logging setting being changed when changing profiles while simulating GPS
    Software 2.8
    Not Recommended
    Several new issues related to settings and profile configurations not working or being lost have been introduced:
    •Map orientation in automotive profile is sometimes set to North/Track Up instead of Automotive
    •Background image settings are not working properly (Default background image displays sometimes even though it is not selected)
    •Map enable/disable settings are getting corrupted in the profile file, requiring the profile file to be removed and recreated
    Some of the issues above may be related to a power off crash that can be caused by switching from Geocaching to Automotive profile with an active route. The steps to reproduce the problem are detailed here and in the issues list.
    Introduced only 3-4 days after 2.7 to fix new issues introduced in this release.
    •Fixed 3D view not displaying
    •Fixed shaded relief being set to 'Do Not Show'
    •Added setting to change land cover text size
    Software 2.7
    Not Recommended (see 2.8)
    New bugs introduced in this release: 3D View does not work, relief shading always defaults to "Do not Show" even if set to "Show if Available" after power cycling. Some reported issues with the altimeter page not displaying data, although make sure the Track Log is set to one of the "Record" modes.
    •Added support for Garmin GB Discoverer maps
    •Added ability to view marine chart notes for marine points
    •Added ability to change the date for the tide and currents charts
    •Added a display option in the setup menu to save battery power
    •Fixed shutdown that can occur when you enter coordinates in demo mode
    •Fixed a potential shutdown that can occur when panning the map that is showing satellite imagery
    •Improved GPS accuracy when using WAAS
    Software 2.6
    Many users are reporting success with this upgrade. It does introduce a couple of new issues: some configuration options are not saved in the profile and there is a crash when entering coordinates in Demo mode. But the big fix is the first item which has been getting in the way of many users -- the startup crash and freeze. Connection times in mass storage mode are much faster as well.
    •Fixed issue that caused a shutdown during power on
    •Added support for marine fishing, nautical, and off modes
    •Added tide and current charts
    •Added ability to access marine point information on the review page
    •Made marine POIs available when panning the map
    •Fixed issue when marking waypoints in the W Malayan RSO position format.
    •Added GDA 94 datum.
    •Added NAD 83 datum.
    •Improved user interface for waypoint location editing
    •Added 'Coordinates' option to the 'Where To?' menu
    •Improved position accuracy calculation
    •Improved static position accuracy
    Software 2.5
    This drop appears to fix issues created in Software 2.4 but a lot of people are reporting hangs and freezes after upgrading. These new issues seem happen in the the same places where the out of memory problems were occurring in 2.3. Unless the memory full errors in 2.3 are driving you crazy I would postpone upgrading until Garmin works this out. If you do decide to upgrade I would suggest backing up and removing all gpx files from the unit and performing a master reset before the upgrade to avoid problems during the upgrade. Once you are upgraded if you have problems with a frozen unit that won't boot you'll need to first try a master reset and if that doesn't work a recovery.
    •Fixed issue with barometric pressure.
    •Fixed issue with tide station data.
    •Fixed issue with elevation over time plot.
    Software 2.4
    Unless you need a fix for the Memory Full problem this software is not recommended. Version 2.4 was released to fix the Memory Full issues that many Oregon users were seeing. However, this version has broken:
    •Barometric pressure data field and plot no longer show data unless you recalibrate every time you power cycle.
    •Tide data is no longer visible under each tide station.
    •Some users have reported issues after upgrading to 2.4 with freezes at "Loading Maps..."
    •USB connection freezes seem to be back after going away in 2.3.
    List of issues resolved:
    •Improved accuracy of altimeter for large altitude changes.
    •Improved importing geocaches. When the same geocaches is in multiple files, the geocaches from the newer file (file modified time) will be imported.
    •Fixed text writing on top of itself in some geocaches descriptions.
    •Fixed freeze when loading some geocaches descriptions.
    •Fixed issues causing a 'Memory Full' warning message.
    •Fixed issues with power off pressure trending.
    •Fixed issue with duplicate waypoint names.
    Software 2.3
    Given the number of issues resolved and relative stability of the release 2.3 is a recommended update. The only major issues which seem to persist in 2.3 are the Memory Full problems and WAAS is still broken. There was one minor issue introduced in 2.3 related to viewing the elevation plot of a route.
    •Added the ability to control the scale of the x and y axes of elevation plot . Tap the x-axis legend to zoom the x-axis. Tap the y-axis legend to zoom the y-axis
    •Added panning and zooming to the image viewer
    •Added ability to set position after pressing the go button when GPS is in Demo Mode
    •Added option to add a point from the map in Route Planner
    •Added option to search near a point on the map in Where To?
    •Added preview of on-road routes in Route Planner
    •Added option to save a geocaches as a waypoint
    •Added error message when the maximum number of geocaches is exceeded (2000)
    •Added error message when the maximum number of gpx files is exceeded (200)
    •Added option to clear the current track from Track Manager
    •Added support for downloading geocaches written using Groundspeak v1.1 extensions
    •Added elevation plot type to user profiles
    •Improved GPS performance
    •Improved map drawing performance in some situations
    •Improved handling of naming a waypoint the same as an existing waypoint
    •Improved feedback when typing an invalid character into the keyboard
    •Improved display of intermittent water areas
    •Fixed 3D View not showing detail from supplemental maps
    •Fixed 3D View occasionally not showing anything
    •Fixed waypoint and geocache symbols not updating on the map after being changed
    •Fixed Custom POIs not being removed from Recent Finds after the Custom POI database was deleted
    •Fixed being unable to pan or zoom when reviewing a route
    •Fixed issues with Cyrillic characters
    •Fixed issue where the Oregon would temporally stop responding after a spell search
    •Fixed issue where left map data field could get stuck on depth
    •Fixed creating invalid gpx files after projecting a waypoint
    •Fixed city coloring with CityNav 2009
    •Fixed map getting stuck in north up mode after panning
    •Fixed geocaches without names not being in the geocaches list
    Software 2.2
    Software 2.2 was released prior to the 400t product launch and is a recommended upgrade for the Oregon.
    Changes made from version 2.10 to 2.20:
    •Added support for customizing track colors.
    •Added support for custom POI alarms.
    •Improved track archiving.
    •Enabled map drawing above 75 degrees latitude.
    •Reduced boot time.
    •Added DEM shading setting to user profile.
    •Added alarm tone that cannot be turned off.
    •Improved high detail map drawing.
    Software 2.1
    Initial product release on Garmin 400t. No release notes available. Since 2.2 was available when the 400t shipped this release was never really used.


    --------------------------------------------------------------------------------


    [hide]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    Code:
    Please Login or Register to see the links
    [/hide]
    Garmin Oregon 200, 300, 400i, 400c, 400t & Garmin Oregon x50 (450 and 550) Software Summary
    [Only registered and activated users can see links. ] - [Only registered and activated users can see links. ]

    Galaxy SII Jelly Bean 4.1.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / GPSMAP 62st / Oregon 600

  4. #3
    Master Kale Bikkel's Avatar
    Join Date
    Aug 2010
    Location
    Netherlands
    Posts
    41
    Rep Power
    40

    Default

    Oregon x50 (WebUpdater) software version 4.70

    Code:
    Please Login or Register to see the links

    Important steps for future BaseCamp Compatibility:
    If you are a user of BaseCamp now, or plan to be in the future, you must follow these steps to ensure your data is protected during this software update:
    Connect your handheld unit to a computer and launch BaseCamp. Transfer all tracks, routes and waypoints to BaseCamp.
    Delete the /Garmin/GPX folder from the handheld's mass storage.
    Update the handheld's software via WebUpdater and reboot the handheld.
    Reconnect the handheld to a computer and transfer your data from BaseCamp back to the handheld.
    Please make sure the batteries in your Garmin device are fully charged before installing this software update. If the batteries fail during the update process, your device may become unusable and have to be returned to Garmin for service.
    Last edited by Kale Bikkel; 19-08-2011 at 09:13 PM.

  5. #4
    Master Kale Bikkel's Avatar
    Join Date
    Aug 2010
    Location
    Netherlands
    Posts
    41
    Rep Power
    40

    Default

    Oregon x50 (WebUpdater) software version 5.00
    as of August 29, 2011

    WebUpdater is required to install this file

    Notes:
    IMPORTANT: if upgrading from a software version less than 4.80 you must follow these steps for future BaseCamp Compatibility:
    If you are a user of BaseCamp now, or plan to be in the future, you must follow these steps to ensure your data is protected during this software update:
    Connect your handheld unit to a computer and launch BaseCamp. Transfer all tracks, routes and waypoints to BaseCamp.
    Delete the /Garmin/GPX folder from the handheld's mass storage.
    Update the handheld's software via WebUpdater and reboot the handheld.
    Reconnect the handheld to a computer and transfer your data from BaseCamp back to the handheld.

    --------------------------------------------------------------------------------

    Change History
    Changes made from version 4.80 to 5.00:
    Modified default map trails to appear as dashed red lines
    Fixed issue where geocache icons would sometimes not draw on the map while using Garmin GB Discoverer™ maps

  6. #5
    ☼ADMIN☼
    catymag's Avatar
    Join Date
    Nov 2007
    Location
    Light Side
    Posts
    15,280
    Rep Power
    1844

    Default

    Oregon x50 software version 5.57 Beta added
    Garmin Oregon 200, 300, 400i, 400c, 400t & Garmin Oregon x50 (450 and 550) Software Summary
    [Only registered and activated users can see links. ] - [Only registered and activated users can see links. ]

    Galaxy SII Jelly Bean 4.1.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / GPSMAP 62st / Oregon 600

  7. #6
    Master Kale Bikkel's Avatar
    Join Date
    Aug 2010
    Location
    Netherlands
    Posts
    41
    Rep Power
    40

    Default

    Oregon x50 software version 5.60

    Code:
    Please Login or Register to see the links
    Change History
    Changes made from version 5.50 to 5.60:
    Added new route activity types and improved BaseCamp compatibility. See TrailTech ([Only registered and activated users can see links. ]) for more information.
    Added support for Kenwood NMEA Waypoint Sentence
    Improved GPS response at low speeds
    Fixed issue with preserving routes imported from Basecamp (identical maps required)
    Fixed Spell Search in German
    Problems with this software may be reported to [Only registered and activated users can see links. ]

  8. #7
    Junior Member
    Join Date
    Aug 2010
    Location
    netherlands
    Posts
    7
    Rep Power
    3

    Default

    Thanks! Is there no problem with the maps if you update the firmware?

  9. #8
    Master Kale Bikkel's Avatar
    Join Date
    Aug 2010
    Location
    Netherlands
    Posts
    41
    Rep Power
    40

    Default

    Oregon x50 software version 5.70

    Code:
    Please Login or Register to see the links
    Oregon x50 software version 5.70
    as of May 31, 2012

    Download (5.96 MB)

    View installation instructions and system requirements

    Change History
    Changes made from version 5.60 to 5.70:
    Fixed an issue with the reporting of pressure from the barometric altimeter
    Fixed possible issue with changing avoidance settings while actively routing
    Problems with this software may be reported to [Only registered and activated users can see links. ]

  10. #9
    ☼ADMIN☼
    catymag's Avatar
    Join Date
    Nov 2007
    Location
    Light Side
    Posts
    15,280
    Rep Power
    1844

    Default

    Oregon x50 version 5.80 added in post n1
    Garmin Oregon 200, 300, 400i, 400c, 400t & Garmin Oregon x50 (450 and 550) Software Summary
    [Only registered and activated users can see links. ] - [Only registered and activated users can see links. ]

    Galaxy SII Jelly Bean 4.1.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / GPSMAP 62st / Oregon 600

  11. #10
    Junior Member
    Join Date
    Feb 2010
    Location
    Sweden
    Posts
    1
    Rep Power
    0

    Default

    Does anyone know if this new firmware implements new restrictions on maps that can be loaded?

 

 
Page 1 of 3 123 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •