after 10hrs .. still charging? have you forced power off?
I try to flash mod fw (boot us(org) + fw all(nuvi25x7_IN_v330)) then over write HWID to 1582. After that my unit no respond (can't turn on and pre boot mode)
How can i recovery?
Thank you in advance
Last edited by sdren1; 7th September 2014 at 04:16 AM.
after 10hrs .. still charging? have you forced power off?
Loly is saying to upload to a host site the copies of both original US & original ID fw versions that you used to make the hybrid fw flashed to your unit. You can use ZippyShare or 1fichier for example to upload, or just tell us the version of US HWID 1582 boot.bin used and give us a link to the ID fw from which you've extract fw_all.bin.
You could also try this, load your complete original US fw to updater.exe and leave it open and visible on your desktop with the radio button selected next to 'USB Device'. Plug a usb lead into a rear port on your PC [but not to unit yet]. Hold the upper left corner of the screen firmly and hold down the power button then connecting the usb to the unit. Hold power button for at least 30 seconds or as long as possible, if unit powers on release power button and press 'OK' on updater.exe immediately after you see your unit's detail appear in the window adjacent to 'USB Device' while continuing to hold the screen until update process finishes.
If that doesn't work you could try opening the unit to disconnect the battery for a while before trying again to flash original US fw.
'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
[Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].
I tried to re-flash original FW follow your method by
1. Prepare original FW by drag to updater.exe then select USB Device
2. Hold the upper left corner of the screen firmly and Hold power button for at least 30 seconds or as long as possible, Result==> can't turn on unit(also USB can't detect USB device)
3. Open unit and disconnect Battery(wait 3-10min) then try again follow item no#2, Result ==> can't turn on unit(also USB can't detect USB device)
4. Tried no#1-3 again result still can't turn on unit.
Could you suggest me again for next action for repair it? (i have the knowledge about electronic circuit)
[IMG]C:\Users\PICSEN\Documents\Bluetooth Folder\20140911_220938.jpg[/IMG]
Does your device not turn on at all ?
Does it turn on when you plug in a usb cable ?
Does it turn on when you press the power button ?
Switch off all lights to look for a glow on touch screen.
The difference between stupidity and genius is that genius has its limits.
Albert Einstein.
Does your device not turn on at all ? ==> Yes
Does it turn on when you plug in a usb cable ? ==> No, can't turn on
Does it turn on when you press the power button ? ==> No, can't turn on
Switch off all lights to look for a glow on touch screen. ==> I tried to turn off room lighting, then turn on result ==> not glow in screen, Then plugin usb cable. It still not glow in screen.
Nuvi is Toast !
The difference between stupidity and genius is that genius has its limits.
Albert Einstein.
Bookmarks