I thought, only I have such a problem.
Sometimes helps to turn off and turn on the bluetooth on zumo
ps ... redlegvzv try these options (sometimes they help):
1) Reset all three bits of gear to erase all the pairings/potential pairings.
2) On the 595, this means pressing your thumb on the bottom right corner of the screen while holding the power button for 10 seconds or so, until "system" appears at the top middle of the screen and starts scrolling down. Let go of the power button at this time, BUT NOT YOUR THUMB ON THE BOTTOM CORNER. Hold that until "system" stops scrolling (probably 4 or 5 times) and then let go. This should have reset all pairings (and probably everything else, but I had no saved routes etc anyway)
3) When you then go in to the 595 settings and select Bluetooth it should display two large boxes, one for headset connection, and one for phone connection. ALWAYS CONNECT YOUR HEADSET FIRST.....Set your headset for pairing and hit the headset connect box/button on the Garmin. This should connect your headset. Then set your 6s for pairing, and hit the phone connect box/button. This should connect your phone. I apologise for not attaching photos, but I am just heading out. See where the above takes you, and if it doesn't work, we can examine it further.
I had had a couple of goes at this (I don't think I had reset my SRC/Cardo properly) and then, magically, I was able to place a call via my 595 screen and hear it clearly through my headset. I was also able to hear iPhone music through my headset, which paused when I made a phone call, and resumed when I hung up.
Bookmarks