Works well on One IQ route and GO 510. Thanks
Quickfix very very fast,and real time position without delay and without gap like old 6.5 version in 2007.
But lot of bugs with poi. Bad dev by tomtom team :(
Printable View
Works well on One IQ route and GO 510. Thanks
Quickfix very very fast,and real time position without delay and without gap like old 6.5 version in 2007.
But lot of bugs with poi. Bad dev by tomtom team :(
You are best!!!!!!!!!!!!!!, I installed to my GO750 working perfact.
Superb, installing on my GO730!
will it works with tomtom Go 500?
I want to give a try.
Than try...
So far no feedback from a 500
Copied from "Fan Edition (9.401) thread, should have been in this thread (GO910):
LOL2, Never thought of that, but found out.
Just road-tested and discovered auto shutdown (in 10 sec?). No suicide.dat in 9430GO.rar so auto shutdown should be disabled? It appears to be disabled when TT not on external power. No spoken instructions, whether turned on or off. BUT, 'Clear route' returns to 3D view to 2D, a big improvement on 9.026.
Also, I must point out that I'm using 9.430GO from your link from:
New Navcore 9.430 GO X20 X30 X40 X50 XL IQ Routes XL Live Xl IQ Routes² XXL Start²Start X Easy
so I'm posting in the wrong thread - it was a good weekend.
Added file 'suicide.dat', containind a single zero, to GO root - no auto shutdown after 25 minutes. GO seems to turn off for real.
Also, Jukebox can play through car speakers. So it's looking good.
Last edited by Hamish33; Yesterday at 03:01 PM. Reason: Update after adding suicide.dat file
Today noticed that RDS/TMC not showing on screen. This had been OK since 7.903 up to 9.026. I've unplugged and replugged the RDS/TMC on the car mount. Any ideas? Am I missing a file or two?
No support for RDS/TMC with 9.430 version.
No support for TMX on X10 device, all other should be fine.
This has to do with the active dock and if I recall it correctly the X10 devices always had trouble accepting other Navcores - that's one reason why I don't like then, same with the XL...
That's a bummer; I've flooded it with routes, vias and itineraries and not had any need to delete 'mapsettings.cfg' 'cos it didn't provoke a reboot loop. And it's fast.Quote:
Originally Posted by Downunder35m [Only registered and activated users can see links. Click Here To Register...]
Does your 9.401 support RDS/TMC?
Have not tested with the 9.401 much as the 9.430 is current and with that I have working TMC.
But that is not a problem of the NC - the X10 uses a docking port and that is not supported, causing the TMC to malfunction.
Best option for TMC on a X10 TT is to use an older NC
