Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Likes Likes:  0
Results 1 to 9 of 9
  1. #1
    Junior Member
    Join Date
    Mar 2013
    Location
    amerique
    Age
    99
    Posts
    4
    Rep Power
    0

    help Help tomtom GO 910

    Hi all, I need help for my tomtom GO 910.
    I took you in advance for mexcusez because I am French and I do not métrise English so I used a translator or surment many errors on the translation.
    That aunt since I put a newer card on my tomtom Go 910, I download:
    FastActivate_09.03.2013
    Integrated_meta
    clear_flash (I do not know if it is useful for my model has a 20GB hard drive to integrate)
    In short order I repeatedly:
    - Manually cancel service contained my tomtom and clear_flash past,
    - After I connect to tomtom home ais then updated,
    - Then I paste the map that I thought to be good for my model with meta text
    - Then I patched with all FastActivate_09.03.2013.
    The hen I reboot my tomtom it always says map not found I thought I did not download the right so I was trying to unsuccessfully odre card always found ... even if I return the card of origin.
    My navcore is normally after patch a 7.9XX but I could not put it with a card I can not verify this, unless quelqun known as free card?
    the original file size of 1.6 GB of my tomtom to call:
    Western_and_Central_Europe
    I did try the 2.4 go
    Western_and_Central_Europe_2GB_900_4600-
    and 1 GB
    Europe 1GB South v900.4608
    then another 2.4Go
    Western_and_Central_Europe_900_4600
    following the normally compatible version of the table but without success.

    so I do not know where it's going to not is that the card is not good OOU all just me who is good for nothing?
    could you help me please, thank you in advance.

  2.    Advertissements


  3. #2
    Member +
    Join Date
    Jan 2012
    Location
    UK
    Posts
    42
    Rep Power
    13

    Default

    Look at and (Google) translate {regardez et traduire}:
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]

  4. #3
    Master Downunder35m's Avatar
    Join Date
    Aug 2010
    Location
    private
    Posts
    454
    Rep Power
    425

    Default

    Mp not found means that files are missing from the map,
    or that the map files have been installed into a sub folder.
    Make sure all map files are located in a folder in the root of the device.
    Run FastActivate to patch Navcore and activate map.
    A successful map activation can be verified by confirming a .dct file is present.
    You might want to check the 905 maps instead of using the old 900 maps.
    Password for all my files: downunder

  5. #4
    Junior Member
    Join Date
    Mar 2013
    Location
    amerique
    Age
    99
    Posts
    4
    Rep Power
    0

    Default

    Re is already thank you for your reply,
    I did not. dct file is present on my tomtom
    When I run FastActivate here's what I obteind when I patch the map and voice, is this normal?


    - When you ettez me:
    card and activate it.
    you talk about downloading software?
    because I can not find anything of that name on the site.
    The card is a single file to the root of the hard drive tomtom, I even try to give the same name of the original map without succees.
    Last edited by Roger; 20th March 2013 at 06:41 PM. Reason: delete pic

  6. #5
    Master Downunder35m's Avatar
    Join Date
    Aug 2010
    Location
    private
    Posts
    454
    Rep Power
    425

    Default

    Please remove the pic as it also contains your serial number.
    With the result of FastActivate you can see that it can't find a map - same what I told you in the previous posting.
    Password for all my files: downunder

  7. #6
    Junior Member
    Join Date
    Mar 2013
    Location
    amerique
    Age
    99
    Posts
    4
    Rep Power
    0

    Default

    thank you for the photo,
    I went on all the links that you have indicated, but unless I'm mistaken, the version of 905 are not yet available for the card I need:
    Western_and_Central_Europe
    it must start fasactivates root or directly into the card, I tested both but am better have the correct procedure.
    For the card I understands that he does not see it but pronléme card?
    meta text?
    or?
    I have put a single folder without a subfolder the root of tomtom.
    Last edited by valgo; 20th March 2013 at 06:47 PM. Reason: join Note

  8. #7
    Master Downunder35m's Avatar
    Join Date
    Aug 2010
    Location
    private
    Posts
    454
    Rep Power
    425

    Default

    To get all woring you must have:
    1. a patched Navcore - I guess that is ok on your system
    2. an activated map - here is your problem!
    Make sure you have the correct meta code for the map,
    create a meta.txt in the folder containing your map files,
    in the meta.txt you put the meta code for the map,
    copy the ttgo.bif from the root into the map folder,
    copy FastActivate into the map folder,
    start FastActivate and activate the map.
    If the meta code is correct for your map it must work now.
    Password for all my files: downunder

  9. #8
    Junior Member
    Join Date
    Mar 2013
    Location
    amerique
    Age
    99
    Posts
    4
    Rep Power
    0

    Default

    thank you for your help and time you have given me, it works a present.

  10. #9
    Master Downunder35m's Avatar
    Join Date
    Aug 2010
    Location
    private
    Posts
    454
    Rep Power
    425

    Default

    Nice to see you got it sorted!
    For the next update just try what you did to make it work.
    The procedure stays the same and you will have it much easier.
    Password for all my files: downunder

 

 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •