Media Nav Evolution Stay at LOGO

**haaymaan** · 15th June 2018, 02:30 PM

hello,
i've Media Nav Evolution 9.1.1 after updating my maps on partion 4 i've delet the hole Storge of the NAV and know the Radio stay at the logo when i start the Car and nothing forword ...????
is there any way i can get it back or even to Start WinCE from USB ...please help

...
thanks

**MGarner** · 15th June 2018, 10:27 PM

Did you just delete NNG folder in Storagecard4 or anything else ?
Because if you do anything else, it's hard to fix !

**haaymaan** · 19th June 2018, 11:44 AM

yes thats what happend,i thing ill contact the dealer

**mickyd** · 23rd June 2018, 03:39 PM

what version did you have on your media nav ? as i formated mine and fixed it by formatting the usb fat32 , extracting ulchack.zip to root of usb drive but u also need to put the nk.bin also onto the root of the usb drive for the version it was running, plug in the usb drive into the medianav switch engine on , turn medianav on , logo with come on but after a few mins it will go off and boot into the wince, if u have storagecard also on the usb drive you can then copy it from usb back to the media nav, once compleat, use careboot to reboot the medianav take out the usb drive and your medianav is now fully working again

ulc_hack.rar
[Only registered and activated users can see links. ]

nk.bin files for 6.0.3,6.0.4,7.0.5,8.0.5,9.1.1 and 9.1.3
[Only registered and activated users can see links. ]

just saw u had 9.1.1, ok so format usb , extract ulc_hack to root of usb add the nk.bin file from the 9.1.1 to root of the usb, then is you have storagecard and storagecard4 on the usb as well once it boots into wince after a couple of minutes use total commander to copy the storagecard and storagecard4 from your usb back to your medianav, then go into storagecard then system hit careboot to reboot the medianav and remove the usb drive it will now boot, and as i say your medianav will be working again

**zokak** · 20th August 2018, 06:19 PM

Work, thank you!

**ximenesbr** · 18th December 2018, 01:10 PM

I got the same problem but in my case my firmware version is 4.0.6. Can I use the same method?

**mickyd** · 22nd December 2018, 08:54 PM

yes but will will need to find the nk.bin file for 4.0.6 not mine but link with recovery files for your version

[Only registered and activated users can see links. ]