Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Page 1 of 10 123 ... LastLast
Results 1 to 10 of 100
  1. #1
    Super Member
    Join Date
    Jun 2011
    Location
    Zrenjanin
    Posts
    163
    Rep Power
    23

    Default Opel navi 900 navi 600 sd card europe 2017/2018

    hello guy's, does anyone have this update?
    all the best
    [Only registered and activated users can see links. ]

  2.    Advertissements


  3. #2
    Member
    Join Date
    Mar 2017
    Location
    MKD
    Posts
    11
    Rep Power
    0

    Default

    Opel/Chevrolet NAVI900 NAVI600 v.2016/2017
    [Only registered and activated users can see links. ] pass:OPEL
    "You will need a Samsung EVO+ SD card and a Linux(Ubuntu) PC with integrated SD card reader, the ones on USB don't work.
    1.Copy the map content on the SD.
    2.Use the tool change_cid to change the CID of the SD

    After you insert the SD check under /dev and look for mmcblkx (can be 0,1,2 etc)

    In my case is mmcblk0, run the application from the current folder
    for 32bit version use the command like this: sudo ./change_CID_32 /dev/mmcblk0 5d53424c32424d31013917ca53010400

    for 64but version use the command like this: sudo ./change_cid /dev/mmcblk0 5d53424c32424d31013917ca53010400

    Desweiteren:

    1 - Card EVO + (I tried 32G and 64G SD)

    2 - FAT32 formatted card (in Windows) and copy navpsf_update in rrot (corrected)

    3 - Install Ubuntu 32/64 (64's what I used)

    4 - Copy local (Desktop linux) folder VW

    5 - open the copied folder and right cick -> "open terminal"

    6 - check with the command execution rights "ll". You must have attributes besides "r", "w" and a "x".
    If there is an X writes: "chmod 777 mmc32" linux if you have 32 or "chmod 777 mmc64" if you have linux 64.
    And the rights and check the "ll"

    7 - Insert the SD slot. Terminal command "df" and verify the name card.
    Somewhere down everything must occur "mmcblk0" + p + a number.
    The suffix p "number" is the partition on the card, we are not interested, just use "mmcblk0".

    CID To read the original SD:
    cat / sys / block / mmcblk0 / device / cid
    xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

    8 - Order To change CID terminal:

    - Linux 32
    sudo ./mmc32 prog_cid / dev / mmcblk0 5d53424c32424d31013917ca53010400

    - Linux 64
    sudo ./mmc64 prog_cid / dev / mmcblk0 5d53424c32424d31013917ca53010400

    After this command will display:
    Writing new CID: 5d53424c32424d31013917ca53010400
    Success! Remove and Reinsert SD card to check new CID.


    To read the SD CID changed:
    SD disassemble and remove it from the linux PC SD reader, and then paste it into the PC
    cat / sys / block / mmcblk0 / device / cid
    will be displaying the new CID 5d53424c32424d31013917ca53010400
    "

  4. #3
    Junior Member
    Join Date
    Sep 2017
    Location
    Croatia
    Posts
    2
    Rep Power
    0

    Default

    Hello alphasoundmk,
    is any option to do procedure in Windows. I dont have Linux (Ubuntu), I never try to work in it.
    Thx

  5. #4
    Member
    Join Date
    Jun 2017
    Location
    :)
    Posts
    25
    Rep Power
    3

    Default

    No. Only linux because for windows is not available soft to change CID

  6. #5
    Junior Member
    Join Date
    Sep 2017
    Location
    Croatia
    Posts
    2
    Rep Power
    0

    Default

    OK.
    One more question: these maps works on Navi 600? I dont need to upgrade to Navi 900? Thx

  7. #6
    Member
    Join Date
    Jun 2017
    Location
    :)
    Posts
    25
    Rep Power
    3

    Default

    Should be work. But we still dont have sharelinks for this maps

  8. #7
    Junior Member
    Join Date
    Mar 2017
    Location
    USA
    Posts
    4
    Rep Power
    0

    Default

    Quote Originally Posted by alfasoundmk View Post
    Opel/Chevrolet NAVI900 NAVI600 v.2016/2017...
    I still get a "invalid sd card" message on my NAVI 900 (Opel)

    What I did:

    1) I have an original SD Card for my NAVI 900 (Europe 2013/2014). So I checked with this original card the command "cat /sys/block/mmcblk0/device/cid" and had the CID for this card.

    2) Then I inserted my new bought Samsung sd card (32gb) and changed the CID for this new card to exactly the CID from the original sd card with the tool from [Only registered and activated users can see links. ].
    Double checked everything, plugged out/in my new samsung card and did again "cat /sys/block/mmcblk0/device/cid" and it looks good, my new samsung card has exactly the CID from the original sd card.

    3) On my new samsung card I made a new folder named "cryptnav"

    4) In this cryptnav folder I copied all files from the the download mentioned from alfasoundmk ([Only registered and activated users can see links. ])

    But as I said at the beginning when I insert this new samsung card to my NAVI 900 (Opel) I always get a "invalid sd card" error message

    Did I something wrong?

    (alfasoundmk mentioned an "navpsf_update" folder and something with VW folder... this is for VW/Skoda cars, isn't it? I named the folder in sd card root "cryptnav" because my original navi sd card has also a crytnav folder.)

    Update: Found the solution!!! Everything above was correct but I have to use the mentioned CID from the thread (5d53424c32424d31013917ca53010400) and not the CID from my old original sd card. Now everything works!!!
    Last edited by Jagg; 6th September 2017 at 09:11 PM.

  9. #8
    Junior Member
    Join Date
    Aug 2017
    Location
    dfs
    Posts
    9
    Rep Power
    0

    Default

    Yes the procedure works but we need the link to download the 2017-2018 Europe Map and the CID associated with this map
    The link above is 2016-2017 maps
    Anyone with the link and CID?

    Quote Originally Posted by Jagg View Post

    Update: Found the solution!!! Everything above was correct but I have to use the mentioned CID from the thread..

    Hi Jagg, if you want and if you can (I cannot now), could you test this procedure on another SD CARD?
    WARNING: It is just an attempt, not a working procedure, so do it on ANOTHER SD CARD.

    1) Copy the map on the new SD CARD as the others
    2) Don't modify the CID
    3) Modify the file \cryptnav\data\data\misc\SDX_META.dat on the SD CARD this way

    <ID cid="5d53424c32424d31013917ca53010400" vin="" />

    4) Insert the SD CARD on the car

    The fact is that they compute Digital Signature using some files on the sd card and the CID of the original card. So, who knows, maybe writing the right CID there the CAR could use it instead of that of the card.

    it is just an attempt

    Thank you

  10. #9
    Junior Member
    Join Date
    Aug 2017
    Location
    dfs
    Posts
    9
    Rep Power
    0

    Default

    Quote Originally Posted by antoniss View Post
    Someone help

    Antoniss, the link and the CID for 2017-2018 map doesn't exist at the moment.
    If someone , in the meanwhile, could test this procedure on 2016-2017 map I would be graceful


    1) Copy the map on the new SD CARD as the others
    2) Don't modify the CID
    3) Modify the file \cryptnav\data\data\misc\SDX_META.dat on the SD CARD this way

    <ID cid="5d53424c32424d31013917ca53010400" vin="" />

    4) Insert the SD CARD on the car

    If this procedure work it would not be necessary to CHANGE THE CID of the SD CARD.

    Thanks

  11. #10
    Junior Member
    Join Date
    Sep 2017
    Location
    greece
    Posts
    7
    Rep Power
    0

    Default

    Maybe you can sent me maps from 2016/2017 if exists ?


    Sent from my iPhone using Tapatalk
    Last edited by Boki_Srb; 14th November 2019 at 09:57 AM. Reason: quote removed...

 

 
Page 1 of 10 123 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •