iGO Speedcam (DISCUSSION)

Quote:

---

Originally Posted by figaro [Only registered and activated users can see links. Click Here To Register...]

.... And these are not your files! Do you have any evidence .... :)

---

Let's look at the file from the SCDB database:

Code:

---

X,Y,TYPE,SPEED,DIRTYPE,DIRECTION
6.0739400,50.7777200,1,50,0,0
6.0997200,50.7593900,1,,0,0
7.6470000,51.9638600,2,,0,0
3.5203300,51.4965000,3,80,0,0

---

Decimal coordinates are 7 digits after the points.

What are the differences

Code:

---

X,Y,TYPE,SPEED,DIRTYPE,DIRECTION, //  13.07.2023  iGO SCDB code 1,2,3,4 Europe
-15.674530,27.770140,1,100,0,0
-15.550190,27.774970,1,100,0,0
-15.387220,27.949080,1,100,0,0

---

Decimal coordinates are 6 digits after the points.
And these files do not contain duplicates, for this reason there are always fewer lines than in the original.
They contain brief information when opening a file, creation date, database name, format.

And most importantly, when there are no files on forum GPS Power, then there are none on the Polish forum, despite today's update of database SDCB.

Code:

---

http://mynavi-expert.pl/igo/page/6/

---

mynavi-expert - empty

What is capable of mynavi-expert?
If there is no content on GPS Power then they just duplicate the already stolen files, for example the Truck from July 4th is updated as July 13th. Direct dependence of publications on GPS Power.

[Only registered and activated users can see links. Click Here To Register...]

For this reason, you don't have to pay to Forum mynavi-expert :buu:, everything is free on Forum GPS Power.:yesyes:.

Conversion speedcam.spc - txt, HERE - 2023 Q2
Italy_HERE_2023.Q2.spc - Italy_HERE_2023.Q2.TXT
Italy - speedcam.txt

Italy_HERE_2023.Q2.spc - Italy_HERE_2023.Q2.TXT

this file contains an error, a radar finds itself outside the territorial limits after having migrated from its original location

@lunapark

migrating radars?, I haven�t heard of that, this file is only a conversion. If there is an error in the *txt, then it is also in the *spc

pay close attention to line 7097 of the txt file, I don't know what software you use to extract the spc data and if this is the cause or if it is a post-processing handling error, but this error positions this radar in the French zone

this is only an insignificant error among thousands of radars contained in this txt, I don't know what software you use to convert the spc, but either it comes from him, or it is due to poor human manipulation in post -processing, if the positioning had remained within the Italian territorial limits it would have gone unnoticed but in this case we cannot miss it when displayed on a map.: txt file as first screenshoot with bad radar in fernch location, spc file as second without error

One thing is certain because I checked it, the SPC does not contain any errors

Spoiler: attached images

[Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...]

What�s interesting is that in TomTom there is no speed on the roads at all, I haven�t done many tests, if this is not the case, write, but without speed on the roads the entire warning system breaks down, this also applies to speedcam.txt, there is a lot of information in these files with speed 0 or no speed (SCDB base, POI base) in speedcam.txt Truck and iTruck (AF Mod) the same principle. In general, sticking to the concept, I don�t see any point in installing TomTom cards.
I usually test everything on cards HERE, and I don't have such issues, so pay attention to this problem with cards TomTom. ;)

Conversione spc > TXT
Italy_TomTom_2023.Q2.spc - Italy_TomTom_2023.Q2.TXT
Italy - speedcam.txt

FAQ - mini

Still, some points need to be clarified, 03 in file *spc this is code 4, since *spc uses encoding ID.

8.844625473022461,45.64521789550781,03 - Average speed camera : End of zone,130,1,126
8.844849586486816,45.645111083984375,03 - Average speed camera : Start of zone,130,1,120


And second, the opening and closing of the section in base OSC is always carried out even if the average speed section ends and starts again, since the base is not only intended for the Pongo skin, there are also other skins and other navigation programs. Today, the OSC base is the only base where cameras for medium-speed sections are divided into start and finish.

8.8446254,45.645217,4,5,1,126
8.8448495,45.645111,4,130,1,120

I no longer artificially create closing sections of average speed in files for the database POIbase, since it is not possible to systematize everything that is put on the map by drivers while driving, this is their choice and it is far from reality.

4 - (35 Average Speed Camera + Finish 5 km h)

This is especially bad for Italy, in this country the medium speed sections end and a new section begins, users of base POIbase pass the section and mark it as completed, in fact a new medium speed section has begun.

And Third, @BIRBANTE, I think that before April 2024 I am not going to visit your site, unfortunately this is a waste of time. Then I will look at your crafts with encoding changes, referring to your ad. And you somehow need to start writing authors when you post content from other forums, mainly from forum gpspower.

modern cameras - radars
There is an article about a camera recently installed in Italy and how it collected 480,000 euros in one month - recording 8,000 speeding violations.

Code:

---

https://www.larena.it/territorio-veronese/garda-baldo/autovelox-venera-sanguinetto-cartello-protesta-1.10256254

---

and this is the site where these cameras are made:

Code:

---

https://www.velocar.it/en/

---

This is a very interesting story in my opinion, which indicates that in the near future drivers need to change their driving style. Modern cameras distinguish the type of vehicle and measure speed in two directions; the speed measurement distance has increased significantly.
Outdated and without a certificate, radars will be replaced with new systems, modern, cheap to manufacture and install.
In many countries, this process goes very quickly, which brings tangible profits and control.

[Only registered and activated users can see links. Click Here To Register...]

Encoding iGO does not require any adaptation for updated cameras, as usually these are stationary cameras, sometimes they are multifunctional cameras if fines for violating traffic rules are provided for by the laws of the countries. Stick to encoding VB in the Pongo skin, all types of alerts are relevant and easily marked on the map in base OSC.

[Only registered and activated users can see links. Click Here To Register...]