Speedcam warnings - configuration, and check the settings

Hi, i reopen this old 3d to have some explanations if possible.
If i understand:
warn_distances = "100: 1000.80: 800.60: 600.40: 400" activate the visual message for example at 100Km/h at 1000 meters from the radar
can you explain the follow, what emits and when:
; S P E E D C A M - C A T : 1
[speedcam_category:1]
activated_spoken_type=speech
activated_speech="Mobile Speed Camera"
activated_min_speech_repeat_delay = -1

approach_beep_distances=550
approach_beep_spoken_type=speech
approach_beep_speech="Warning!"

skin_first_sound_type = sound
skin_first_sound="Mobile_Camera"
skin_speed_sound_delay=200
skin_repeat_sound="Mobile_Camera"
skin_repeat_distance=10
skin_off_sound="speedcam_off"

min_frc=-1
use_road_speedlimit=0

"Warning! Mobile Speed Camera" speech must be heard at 550 meters from the radar?
what is the skin part for?
After the first "Mobile Speed Camera" advise, it repeats 2 or 3 times "Speed limit is XX km/m". How can i mute this message?
If no route is selected it say "There is no route". How can i mute this message?

Hi wojpen.

Could you look at this problem I have in this topic [Only registered and activated users can see links. Click Here To Register...] ? Thanks. I think it is related to this topic.

I was not able to setup arimi skin alerts with wav sounds AND TTS properly, like I have with Pongo skin and even Primo 2.4 build with DimKa skin.

Thanks.

show here what you have saved in the spedcam cat section in the file sys.txt?
regards :)))

@ wojpen

I have read this link: [Only registered and activated users can see links. Click Here To Register...]
and edited only plugin.ini at speedcam.zip!

There is no spedcam cat section in my file sys.txt!

Does Arimi skin need this sys.txt setup too ?

Thanks

Hope someone can provide some advice. Was trying to has tts announce the red light camera, but could not make it work. It was pronouncing something else. iGO World 9.18.27.736653 - 19.jun.2018 on Samsung S5/Andriod 6.

Below is part of the sys.txt related to speemcam setting.

Code:

---

; S P E E D C A M - C A T : 2
[speedcam_category:2]
overspeed_spoken_type=none
overspeed_sound="none"
skin_first_sound="Redlight_Camera"
skin_speed_sound_delay=140
skin_repeat_sound="Redlight_Camera"
skin_repeat_distance=150
skin_off_sound="speedcam_off"
;use_road_speedlimit=0
approach_beep_speech="speedCam"
activated_spoken_type=speech
activated_speech="Red Light Camera"

---

Thanks

Problem is the missing translation in your dictionary voice
You will find the words in the plugin.ini of your speedcam.zip
e.g. - Red Light Camera="xxxxxx" xxx=your language

And read here :[Only registered and activated users can see links. Click Here To Register...]

thanks for the reply.

i was using English-US_universal_unisex_andTTS-Boki_Srb_v.1.zip voice file. There is section regarding the red camera in dictionary.voice file, i do not see any plugin.ini file.

Red light and speed camera ahead.="Red light and speed camera ahead."
Red light and speed camera.="Red light and speed camera."
Red light camera ahead.="Red light camera ahead."
Red light camera and speed enforcement area ahead.="Red light camera and speed enforcement area ahead."
Red light camera.="Red light camera."

Thanks.

Edit:

never mind, i found plugin.ini which is in the speedcam.zip file, however it does have the same info.
i will check and see whether i can find more info to solve the issue.

Thanks,

still could not get speed camera warning to work and found another issue.

Was using pongo skin.There is sub-menu under "road signs", which is "choose sound and voice road signs", the default setting is "!alert4|---", when i use tts to test it, it will pronoun dash-dash-dash which is not expected. Tried multiple zip file under ux, but could not figure out which one contains this setting. How can i remove the "|---" at the end of the "!alert4"???

Update:

OK, i finally have my issue solved and lesson learned. I delete save folder and start over the configuration again, and seems to work now. The one left issue is the us tts voice is not that beautiful.

Thanks,

After few days testing, i still cannot make speedcam working. TTS is properly configured, we can test the TTS warning voice in the alert point testing. The only issue is real road testing, when approaching red light camera, i can only hear one beep, and the screen showing red warning sign, but there is no TTS speech about "red light camera". i have been reading all related topic, but still without luck. Can someone please review my setting and advise what is wrong? Thanks.

Code:

---

[warning]
is_sound=1
is_spoken=1
speedcam_enabled=1
speedcam_warning=1
skip_approach_beep=1  ;value 1 means do not repeat 'approach_beep_speech' also records not valid approach_beep_distances'
say_camera_speed_limit=1
speedcam_max_lookahead=500
speedcam_maxdistance_from_road=54
say_camera_distance=1    ;distance to camera
speedcam_continuous_approach_beep_when_tonal=0
speedcam_need_approach_beep_on_section_cameras=1  ;1=notify distance to the first section camera

[speedcam_category:4]
activated_spoken_type=speech
activated_speech="Red light camera ahead."

warn_distances="00:150"
approach_beep_distances=550
approach_beep_spoken_type=speech
approach_beep_speech="Red light camera."

skin_first_sound="Red light Camera"
skin_speed_sound_delay=600
skin_repeat_sound="Red light Camera"
skin_repeat_distance=550

overspeed_spoken_type=speech
overspeed_speech="Reduce your speed."
overspeed_min_speech_repeat_delay=-1
overspeed_min_tone_repeat_delay=-1

min_frc=5
use_road_speedlimit=0

---

:mn:

Put sys.txt (or parts of it) in "CODE" (# button).

cpu533 ;
I guess redlight camera warning important menu and they don't want someone edit or modify
so try change number of speed category from 4 to other

such as speedcam category 17

edit in txt file (in speedcam folder) X,Y,TYPE,SPEED,DirType,Direction change TYPE 4 to 17


edit in speedcam.zip / ux / speedcam / plugin.ini open plugin.ini and edit number [speedcam_category:4] to [speedcam_category:17]