Put ONLY a ONE voice zip file,what you want to use.
Having many zip files absorbs ram memory in the device.TTS is greedy for memory.
Put ONLY a ONE voice zip file,what you want to use.
Having many zip files absorbs ram memory in the device.TTS is greedy for memory.
Bixo,
Only ONE zip.file wasn't the resolution. Still no spoken instructions.
A person of a Dutch forum suggested the next:
Write in the existing sys.txt the next lines:
[sound]
use_method=1
device=1
csv_voice_enabled=1
This I tried.
Yes, now I hear the spoken instructions in German.
The two part of Snotmann ( #1) I extracted and copied it to a sdhc card.
The only thing I changed was sys.txt.
And it works on a Clarion NX405e nextgen.
Now I will try to get Dutch TTS voices working on my Clarion.
Perfect, sys.txt solves many things with added lines. ;)
My entry for audio in sys.txt (BMW custom 2 din chinese unit and WinCE 6.0):
[sound]
pause_mp3_sooner=0
ding_muted=1
enable_waveout_based_ebp=1
waveout_based_muting_fill_value=1
sound_level_0=16383
sound_level_1=28671
sound_level_2=40959
sound_level_3=45055
sound_level_4=49151
sound_level_5=53247
sound_level_6=57343
sound_level_7=61439
sound_level_8=65535
use_method=4
used_byte_in_method=7
use_os_volume=1
os_volume=255
master_volume="255"
csv_voice_enabled=1
effect_volume=255
guidance_volume=255
os_muted=0 ; 1 -> sound off
maneuver_chimes=0
mute_os_key=1
sound_muted=1
ding=0
If you want perform the TTS voices, add it to sys.txt:
[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=3
announce_street_name=1
skip_exit_numbers=2
Now if you want increase the TTS voices, add it to sys.txt:
[dynamiccompressor]
compressor=1
ratio=9
gain=9 ; --> adapt this value,decrease o increase, 9 ok for me,my suggestion max 12
Bixo, I put TTS and Dynamiccompressor to my Sys.txt.
But when I started my Clarion NX405e, it hadn't the result I hoped for.
When I changed the volume with the volume button on my Radio, I don't hear the difference.
When the Volume button is on 13 or 40(max) there is no difference.
It seems that I cann't increase the volume of the voices in my Clarion, although I put your TTS and
dynamiccompressor in the sys.txt.
Another thing is that I hoped with pause_mp3_sooner=1 my radio should be still, when my navigation comes with spoken instructions.
Now I here the radio as well as the spoken instructions.
I find that annoying.
Try this....in sys.txt:Quote:
Originally Posted by Striemian [Only registered and activated users can see links. Click Here To Register...]
[sound]
use_method=1
folder save need delete...
@ Striemian
To increase the TTS volume, act on the "gain" value as shown.
If it does not work, it depends on your unit.
Same thing for pause talk while Nextgen speaks. In my unit (2 din 7" WinCE 6.0 custom for BMW) is automatically the unit that lowers the volume when speaking Nexgent or other sw Navi different, regardless of particular setup in sys. txt.
See if your unit in setup has a Navi\ voices paused management, my yes.
Try putting as written below to increase the TTS volume, and act by increasing the "gain" factor 9 to 20.
Remember that by increasing too much the value es. > of 9,could distort the sound of voice.
[dynamiccompressor]
compressor=1
a0=56806
thrs=24703
ratio=9
gain=9
Guys you are barking a wrong tree. TTS has nothing with the regular voice instruction in this case. Some Clarion devices are known about this issue (no sound for voice instructions). All you need is iGO Primo version extracted and crac*ed from Clarion device. Try this one and it should work!
[Only registered and activated users can see links. Click Here To Register...]
Arslankayna,
You advice stands already in the sys.txt. Look at #77
Janch, when I visit your link I become the next message:
"The requested file is no longer shared on OneDrive".
you hear german instructins....why no dutch?
:gumball: link post#13 active....try link usercloud.comQuote:
Originally Posted by Striemian [Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
Arslankayna,
No Dutch voices because in the IGO Primo of Snotmann ( post #1) are only German Voices.
In post #91 you see the voices which are in the IGO primo of Snotmann.
I'm looking for Dutch TTS Pro WinCE Loquendo7 voices but cann't find them.