Printable View
My friend in the last skin for AVIC the fda signals from navteq map ,the half size is out of screen in orizontial pasition
Spoiler: screenshots
:mn:
Two posts merged. Also, please, use spoilers for large pictures. Read carefully:
[Only registered and activated users can see links. Click Here To Register...]
and
[Only registered and activated users can see links. Click Here To Register...]
You had right dear friend.
Replace theese 2 files from your ux folder!!!
For this skin, of course, only!
WE NEED
BOTH OF THEM FILES!
Hi,
Sorry for the " off topic " !
@Bixo
Would not you have a problem with the length of your environmental zone ?
821 kms seemed a lot to me ! :)
Spoiler: picture
@Alain
Everything is likely...that photo was not with my package as I currently use, but with the one in upload by friend @Frontzosd.
But it seems that something is not working properly with unwelt plugins and NG WinCE ...:hi:
And the strange is,
That everything works correctly with theese plugins and my Huawei P30 Lite (android) device!!
Its like we look for something, whick never exist.
I write code in my device, and straight I check it!
No laptops, no Pc etc!
Thanks to total commander.apk, of course!!
My job doesn't give me time to sit somewhere and write!!
And of course Pna, doesn't give me this Usefull feature...
So my friend Bixo, you send to me to cheq 1 Dpi...
Only
hdpi!
This can't be with my tool (android device)!!
I need ALL dpis. For to cheq it, and fix it!
For win Ce!
And this is problem, if something appeared ONLY, in WinCe!! as you said!
I know that this trick is useful for Win Ce, (to keep only
The Dpi for your device, for fast! )
But this is a big problem for me, for to fix !
Replace data zip fileQuote:
Originally Posted by tsiou1 [Only registered and activated users can see links. Click Here To Register...]
For the skin:
Frontzosd & Bixo For Android
Only for this!
Dear friend @Frontzosd,Quote:
Originally Posted by frontzosd [Only registered and activated users can see links. Click Here To Register...]
I understand your reasoning ....
Have you tried my hdpi and unwwelt plugin on your WinCe device?
With your package above "FULL WinCE" unwelt zone does not work at 100%, it shows unwelt distance in wrong random approach (as the friend @Alain has noticed), with my package only hdpi as I wrote to you it works, but does not show the red road passing in unwelt zone, while with your plugin and button in sidelist, EVERYTHING ok with my hdpi package.
Perhaps the sidelist button code sets a save folder setup that makes the plugin work perfectly?
Everything is weird or maybe the unwelt plugin code is not ok with NG WinCE ...
My package only hdpi simply compared to our skin packet I removed the other "useless" resolutions for my use.
Restoring all my "full dpi" package is difficult, over time I don't remember every single thing I did ... I don't.
Well, in any case I advise you to try (if you want) the only hdpi package on your WinCe device, and if we can't solve ... patience, no problem, I simply won't use unwelt pluign, but in any case I thank you for all job. ;)
Bye!
:mn:
Please don't quote complete large posts.
OK then.
Why are you don't using the plugin which works 100%?
I don't understood!!
Send me this!
______________
And I repeat again...
How easy is to write something and to cheq straight
From to:
1) Write,
2) Go to your car, embedded system!
3 ) connect a cable
4 ) copy the files
5 ) Doing Safe un plugin!
6 ) open your Pna
And cheq it
AND THE IMPORTANT!
7) Do this Many times
MANY MANY TIMES!!!
for you, which you put the plugins
I know that
is very easy!
BUT NOT for me!
--------
Also the tip which, you keep one Dpi and delete the others
I know that it's nice for speed!!!
But for me is unuselless
Because there is not ONLY one Dpi for WCe.
And what happened if you have another device with different Dpi...
This skin goes to the trash, if you don't keep full back up!
The speed is good, for Windows Ce
But not ruin the skin!!!
This shows alert panel and red road, also shows the button for unwet zone on map.
but ... also shows the wrong count in approach to unwetl zone as shown by photo highlighted by Alain.
I don't use this because I don't understand the reason of having a new button on the map, and besides it seems not to work in order to quickly determine with click if to enable or not the calculation with unwelt ... always opens the choice of type of route, icon changes in function of the click.
attached...Spoiler: Plugin
And this seems to show the right unwelt distance, but no red route for unwelt.
It also does not show choice button unwelt in sidelist, as it is right to have.Spoiler: plugin-bis