Skin iGO nextgen by pongo (DISCUSSION)

Quote:

---

Originally Posted by CChoupi [Only registered and activated users can see links. Click Here To Register...]

.....Is it necessary to change the codes.....

---

Hi....
Is not necessary, but I'm used to it because I do different samples and for each sample I need to delete the save folder. So, every time when start up, I make fewer initial settings :wink:

Quote:

---

Originally Posted by 1franka [Only registered and activated users can see links. Click Here To Register...]

I have the latest skin from pongo and i am not able to show the alerts shown in "Railroads" spoiler.

---

Hi.....
This alerts are from a one version NextGen made for Spain, and in the original skin by Pongo are not exsist!
In this version have been removed:

Spoiler: categories

Code:

---

       
        <row text="Strelka Camera" id=5>
        <row text="Dangerous Railroad Crossing" id=24>
        <row text="Highway Exit" id=25>
        <row text="Speed Boards" id=26>
        <row text="Dynamic Traffic Light" id=27>
        <row text="Max Height" id=28>

---

and in their place are the Spanish:

Spoiler: categories

Code:

---

        <row text="Fin de Tramo Controlado"      id=5>
        <row text="Radar Fijo Limite Variable"      id=24>
        <row text="Radar Movil Limite Variable"    id=25>
        <row text="Radar de Stop"                    id=26>
        <row text="Radar de Tunel"                  id=27>
        <row text="Area de Prioridad Residencial" id=28>

---

Regards.....

Quote:

---

Originally Posted by 1franka [Only registered and activated users can see links. Click Here To Register...]

anonymvs, you misunderstand me ...

---

1) ... in latest Pongo skin (11.01.2018 ... which is published in post #701 by @Naissus in this thread) is no selection like in @Railroad spoiler, because @Railroad is using (I think, maybe I am wrong) a MOD of Pongo skin, moded by @laradiobbs. In Pongo skin, the speedcamera limiting speed is setting up in a way which I explained in post #739. You do not need to edit the "speedcam.zip" nor "sys.txt". You have to manualy set-up every camera on the map, or with the "Spudigo" tool on PC. With the "Spudigo" tool you make a *.txt file which you must put in to iGO_xxx/privdocs/InappShop/Mount/speedcam folder. Btw, that is already explained in @Naissus #701 post :

Spoiler:

In previous releases did not work best but is now in operation, 2 cameras are used for average speed measurement. the first camera is a trigger and it starts the measurement, it is set by manual tuning or through the txt file for the cameras, CAT3. The measurement time is set to a maximum of 2 hours. After that the measurement stops. Also, the measurement stops by recalculating the route or losing the GPS signal.

Spoiler: Screenshots

[Only registered and activated users can see links. Click Here To Register...][Only registered and activated users can see links. Click Here To Register...][Only registered and activated users can see links. Click Here To Register...][Only registered and activated users can see links. Click Here To Register...][Only registered and activated users can see links. Click Here To Register...]

...

Spoiler: Screenshots 2

[Only registered and activated users can see links. Click Here To Register...][Only registered and activated users can see links. Click Here To Register...][Only registered and activated users can see links. Click Here To Register...]

I do not want to enter into debates, indicate about the average speed cameras, my opinion and experience.
There is a beginning and an end, during the trip, a maximum and minimum speed and duration.
Function and location in Spain.
look links spoiler

Spoiler: link

[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]

Hello, thank you very much, Atencion does not say, but now it says sound in English, I do not know what to do, and it's the last penultimate

Mate,

Try this -new- one, it does not say sound.. Fixed!!

[Only registered and activated users can see links. Click Here To Register...]

Success..

BrGd
Madyen

[Only registered and activated users can see links. Click Here To Register...]
Please help. Why in England in pongo in this way displays signposts?

Quote:

---

Originally Posted by Florentin [Only registered and activated users can see links. Click Here To Register...]

Thanks for the help, keep talking in English.So you want it in spanish lango?

---

Right ;)

Success..

BrGd
Madyen

Mate,

These are the newest one.. some fix / correction "voice"!

Spain is on the way / Added!!

Success..

BrGd
Madyen

Hi

I have a few questions that i would like clarification on:-

1) Order of priority for commands.

This is my understanding, am i correct

a-sys.txt/xxxx

b-speedecam.zip/ux/plugin.ini/xxxx

c-data.zip/project_config/iGO_nextgen.ini/xxxx

2) If unit are set to "yards/m.p.h.), in regional settings will speedcam settings also be in the same units

i.e. warn_distances="60:1000" = 60m.p.h./1000yards

3) Can some please explain the following command

approach_distances-115 ; 50% (=115/230), ~13 sec before the speedcam
__________________________________________


Thankyou

Updated "skin nextgen by pongo"

Spoiler: Link part 1, 2, 3

Thanks pongo