Skin iGO nextgen by pongo (DISCUSSION)

Quote:

---

Originally Posted by cristianyxtl [Only registered and activated users can see links. Click Here To Register...]

@gpsseeker,your answer in
Map appareance/automatic overview in split view/uncheck split view
Or in settings/navigation view/disable 2D-overview of maneuver
I think the second one its want you want

---

Quote:

---

Originally Posted by jorgeultra [Only registered and activated users can see links. Click Here To Register...]

@gpsseeker

You can also check if in your UX folder you have the file next_maneuver_overview_ng.zip.
If so, remove this file from the folder.

---

I have answered to your posts earlier, but my answers were not approved for some reason.

Of course the "2D-overview of maneuver" setting removed the preview.

I still try to figure out how can I make the entire map zoom in when approaching a turn and then zoom out after completing the turn. Whoever has a clue, please post.

Quote:

---

Originally Posted by Boki_Srb [Only registered and activated users can see links. Click Here To Register...]

A question like this? How to update the skin? Browse the topic again.
Again - this has all been discussed many times
Don't mix old and new content. It is highly recommended to clear cache and delete the save folder after replacement.
Etc

Of course it is compatible, it is in the very definition of skin.

---

I made the last version of the skin work, but it has a different UI, so I'm not sure I intend to keep it.
I'm not sure I understand all the instruction though. For example it is stated:

• if there is a need for even more additional functions, activate only the necessary , inactive plug-ins by deleting three dashes at the end .... zip ( ---), I do not advise you to activate everything, most of them you just do not need;
• select a start plugin from an archive / ux_additionally / loading_ux and write to the folder ux: ;

I don't see any files ending with 3 dashes in the last version of the skin.
Should I keep the previous "gpsandmore_generic.zip" in that case, as that file is not existent among the files of the Update 03-11-2020?

@gpssekeer Normally zoom in/out at maneuver are automated function . You have to set some things for this function :cockpit/mini maneuver and navigation view/automatic overview settings-to default
But its quite hard to guess because need an video to see how map react before maneuver and after.I also use an old version of skin

I'm coming from an iGO Primo setup on Windows CE where this behavior (zooming in and out at turns) was the default behavior.

In the "Map appearance" I have "Viewpoint" set to "Normal" and "Enabled user settings" turned off.
In the "Automatic Overview Settings" I have "Automatic overview" enabled and "Automatic Overview Mode" set to default.
In the "Cockpit" settings I have the "Mini maneuver" enabled, the "Dist Hide Mini Maneuver" set to 1000m and the "Mini Maneuver with Junction View Visible" also enabled.

The version of the skin is 2017-01-22.

With these settings the map zooms out to give a general view of the journey when traveling at high speeds, but when slowing down to make a turn the map stays at the "Normal" viewpoint level.

If someone has a solution, I'm all ears.

@gpsseeker
sys.txt

Code:

---

[camera.roundabout]
enabled=0

---

@gpsseeker,, you have to put; Enabled user settings-on ,and do not activate,; map angle dependence on speed;
Smart zoom must be activated,for this you need to put viewpoint first to manual, enable smart zoom, then switch back viewpoint to normal
If dont work, make a fresh install, sometime things go crazy

@gpsseeker,
With the Pongo skin from 2021.04.12 ([Only registered and activated users can see links. Click Here To Register...]) it is possible to make a configuration that might solve this problem, see the images and video below:

Spoiler: view

[Only registered and activated users can see links. Click Here To Register...]

[Only registered and activated users can see links. Click Here To Register...]

[Only registered and activated users can see links. Click Here To Register...]

[Only registered and activated users can see links. Click Here To Register...]

Well, I'm still trying to solve it.

First of all let me make clear that I always use the navigation in 2D, so I don't want to change tilt. I want only to change the zoom level.

I added these lines:

[camera.roundabout]
enabled=1
[camera.intersection_zoom]
enabled=1

prompted by Andrey Form's post, but things don't work properly. It seems that settings worked only in roundabouts or only for higher speeds in simulation.


edit: I have also one question to add. When approaching a tunnel I get a direction icon top left corner and the announcement to drive straight. Is it possible to remove directions for tunnels or/and the voice that gives instructions to continues driving straight?

@gpsseeker

Spoiler: img

[Only registered and activated users can see links. Click Here To Register...]

Try to put all things to off ,and voice to no sound

@Andrey Form

I have updated to the skin from post #[Only registered and activated users can see links. Click Here To Register...].

I see [Only registered and activated users can see links. Click Here To Register...] some files for speedcams. More specifically I have downloaded the mod GR which has to zip files:

• speedcam.zip and
• speedcam_mod_GR_AF.zip

What's the AF mod and should I copy the files from both zips to the corresponding folders of the iGO or should I select just one of the 2?

@gpsseeker
pongo split in 2019 for the convenience of speedcam into two parts,
speedcam.zip - notification management,
speedcam_mod-content (icons)

This made it possible to change the encoding and icons without editing speedcam.zip main file.
And so, speedcam.zip and speedcam_mod - this is a kit
speedcam.zip, speedcam_mod_GR_AF.zip - this is a kit
GR - Greece code speedcam
AF - modification speedcam Andrey Form (icons, alert codes and their names, and other settings)