Skin iGO nextgen by pongo (DISCUSSION)

Quote:

---

Originally Posted by igonavi [Only registered and activated users can see links. Click Here To Register...]

I would like to calibrate the speed cameras sounds, no beep (example default approacing beep), only wav sound in the following way:
1) first sound at 350m
2) second sound at 250m
3) third sound at 150m
4) fourth sound at 50m
Thanks for the help.

---

It no longer change in the sys.txt but rather in the plugin.ini file of the ux speedcam.zip for iGO NextGen.
For the configuration: [Only registered and activated users can see links. Click Here To Register...](Thank you..... We miss you :bluecrying:)

Regards

Hello,

I have downloaded "[Only registered and activated users can see links. Click Here To Register...]"
And "[Only registered and activated users can see links. Click Here To Register...]"

I don't understand this second step to use both : "write from the archive folder ui_nextgen with sounds ... wav; "

where is the folder "ui_nextgen" in this archive please ?

Thanks in advance

@ GDM

To answer your questions :
The screenshots were made with an " Avicsync " version.
Regarding the skin used, it's a bit more complicated:
It's a skin, more exactly a " Mod " created exclusively for French users, so with some French peculiarities !
It is not broadcast here !

By adding the good "ux (s)", you can have a close visual with the Pongo skin!

Thanks for the information, but I had already tried to modify the plugin.ini in speedcam.zip, but after having modified it iGO shows "loading iGO NextGen" and does not start.
I had already read also the explanation of Brown Dog and in my iGO Primo I was able to configure correctly the speedcam sounds as desired.
I tried to replicate the same configuration (file sys igo Primo) without success. Then I tried to adapt the same sys based on various indications but the result is always the same.

I can't understand how to configure iGO NextGen in the way I want it.

Thanks for any other help or advice.

Quote:

---

Originally Posted by igonavi [Only registered and activated users can see links. Click Here To Register...]

Thanks for the information, but I had already tried to modify the plugin.ini in speedcam.zip, but after having modified it iGO shows "loading iGO NextGen" and does not start.

---

You are doing a wrong manipulation or using Bad WinRAR

Quote:

---

Originally Posted by igonavi [Only registered and activated users can see links. Click Here To Register...]

I tried to replicate the same configuration (file sys igo Primo) without success. Then I tried to adapt the same sys based on various indications but the result is always the same.

---

For iGO Nextgen the configuration of the speedcam is done in the file plugin.ini here is a file example and it works

Spoiler: Code SpeedCam

Code:

---

; S P E E D C A M - C A T : 0
[speedcam_category:0]
activated_spoken_type=speech
activated_speech="Speed Camera"

approach_beep_distances=200
approach_beep_spoken_type=speech
approach_beep_speech="Speed Camera"

overspeed_spoken_type=speech
overspeed_speech="Reduce your speed."
overspeed_sound="speedcam_over_speed"
skin_first_sound="Fixed_Camera"
skin_speed_sound_delay=0
skin_repeat_sound="Fixed_Camera"
skin_repeat_distance=100
skin_off_sound="speedcam_off"
warn_distances="110:700,100:700,90:700,80:700,70:700,60:700,50:700,40:700,30:700,20:700,10:700"

700-200=500 - first warning
500-200=300 - second warning
300-200=100 - third warning

use_road_speedlimit=1
min_frc=-1

---

Regards

I tried using the windows archive manager to modify the plugin.ini and now iGO starts without problems, but the result of the sounds is always the same.

Could you kindly post, if possible, the contents of your ui_nextgen and ux folders?

Thanks in advance

Quote:

---

Originally Posted by igonavi [Only registered and activated users can see links. Click Here To Register...]

I have iGO NextGen v. 9.18.27.687519 and skin by pongo v. 28 June 2019.
Here the google drive link of my iGO_NextGen folder and APK:

---

I downloaded everything to see what you have and saw that there is some confusion......

First you are using the version of Israel modified by modemakias for the SD, with all the problems of Android with external SD.
You say that using the Pongo skin of June 28, 2019, I downloaded it too, in the ux folder there are 58 zip files while in your folder there are only 31, are you really able to choose the ones you need and those you don't need?
There are these zips that are not part of the "original" Pongo skin, ari_simulation, width_road_x1.5, world.

Your sys file is anomalous, it is a mix between the one for Primo and the one for Nextgen, if you use the skin of Pongo why don't you use what is indicated for the Skin?

As Lou Bouha told you, the speedcam commands are now found inside the plugin.ini file of the speedcam file, but it is not a problem, what is written in the sys prevails over everything, so even on any orders that are found in the plugin.ini.
Most of the speedcam commands relate to the use of TTS voices, but you don't own them, you only have the basic voices.
You have phoneme files, but they serve for TTS voices and in Android they only create problems.

In the speedcam folder you have the txt files of POI Plaza, (antique), SCDB and the spc of TT and Here ....... how many times do you want to be notified? The coordinates of the Autovelox itself are not identical but differ slightly.
The SpeedcamUpdates.spud file in Israel is formed in providocs / InappShop / Mount / speedcam and must remain in here.

Can you see your POIs in kml? They don't seem to be in the right format.

Quote:

---

but I had already tried to modify the plugin.ini in speedcam.zip, but after having modified it iGO shows "loading iGO NextGen" and does not start.

---

You must use Total Commander, free on the Play Store.

Quote:

---

I had already read also the explanation of Brown Dog and in my iGO Primo I was able to configure correctly the speedcam sounds as desired.

---

In this case I can't help You because I use vocal warnings with the voices tts nua ve1 ..........

Hi Igonavi;)

I'm really sorry .... I can not continue to help you .... other member as usual .... come to disturb our exchange..... a certain thing, what i put you in my two posts is check OK 100%

Good luck :classic:

Regards

Please help!
how to save screenshots as .jpg files, not .bmp files
changes into sys.txt not working
added into [debug] section
screenshotfilename="android_linked_root/iGO_Basar/screenshots/image_%02d.jpg"
thanks!

Welcome!

You can't change it, sys.txt entries are ineffective, only the Avic version can save in jpg format.