From 5 to 7km/h is discrepancy. We are using civilian gps so that is normal.
iGO
Printable View
From 5 to 7km/h is discrepancy. We are using civilian gps so that is normal.
iGO
Hi, I read a lot in the forum but I can not find the solution I need.
The problem is that after installing the latest update of Pongo (2018-07-21), I did not create the radar file "speedcam.spdb".
If I put an old one, he does not read it either.
Someone could tell me where there is information about it.
The version I use is (ISRAEL_9.18.27.687519)
@fuorigioco1981 and @Texas and all other having doubts about this.
We had once (now it's lost) very long discussion about this.
GPS has delay, but every received point is delayed, and it's not affecting calculation of average speed (simple mathematics).
This average is not calculated in long distance, but from point to point that could be visible as "vehicle" is moving constantly (with that calculated average speed), but "point" is jumping from old to new received location.
So, position in any moment could be wrong to up 10m, information for every point is deleyed, but average speed calculated by GPS is not affected by this and is correct.
It is only late for few seconds (or less).
Another thing is that all vehicles are showing 5-10% higher speed than actual.
All involved instruments have some tolerance, tires could be newer or older, pressure in them could be higher or lower, vehicle could be heavier or lighter (which also affects tires volume).
All this affects speed measurement.
To avoid situation in which vehicle is moving with speed "higher" than it is displayed (which is unacceptable), all instruments are calibrated to show higher speed than actual.
For this reason in some counties (like Croatia), there is tolerance accepted by law, which is 10 km/h for speeds up to 100 km/h and 10% for speeds over 100 km/h.
These are facts and not my opinion.
@JustoGa; you need SpeedcamText.txt in data_folder/Content/Speedcam/
the speedcam.spdb is the result-file from index by first start
Spoiler: see Grafic
Thanks for the attention, I have the "SpeedcamText.txt" in the corresponding folder.
Well, I've already solved it.
I have uninstalled everything, I have returned it to install with the latest updates and it works perfect.
There must be some corrupt file.
Again, thank you very much for the attention.
Hello @ all!
Where can i find the Pongo Branding.zip for Israel Nextgen?
no branding.zip in pongo's skin
Hi, what I have to add to tts_voice for 100% function of the skin in my language?
How can i chance in iGO Basar 9.18.27.736574 - 13.jun.2018 skin Pongo the color from bleu to white in warning like speedcamera, traficcontol
Friends, good morning.
I need your help to modify / adapt the speedcam alert system of the "Pongo" skin.
Speed cameras (radars) use different speeds, depending on the road / street / highway.
The other alert points (schools, spines ...) always use the same alert speed.
I need to adapt the system, to choose which alert should speak distance and speed, and which alert should speak only from a distance.
I edited the file
speedcam.zip -> ux -> speedcam -> plugin.ini
In each section (alert type) I used:
say_camera_speed_limit = 1; Speak speeds
or
say_camera_speed_limit = 0; Do not speak speed
But it did not work.
According to what I select in the main menu, all alerts speak speed
OR none alerts speaks speed.