Printable View
Hi sujek,
I use this Igo [Only registered and activated users can see links. Click Here To Register...]
when i install this it self create sys.txt with this inside:
[speedcam.disabled_countries]
_FRA=x,x,x,x,x,x,x
_SUI=x,x,x,x,x,x,x
But its not working, i also try make in data.zip this:
[speedcam.disabled_countries]
;_FRA=x,x,x,x,x,x,x
;_SUI=x,x,x,x,x,x,x
its the same if gps on, the settings speedcam is gone?
@gsowner
Do you have in your sys.txt, in the section [warning] recommendation: speedcam_warning=1 ( launches radar warning)
Check and try.
Yes it is in there , i think the apk is not proper cracked for speedcams in france and switzerland.
Hello.... @gsowner
do you have read this post or maybe to test it ??
[Only registered and activated users can see links. Click Here To Register...]
yes i have the Result is if wifi or 4G is off the settings for speedcams work, but if i turn on wifi or 4G the speedcam settings gets removed.
I think not 1 of the 1000 igo nextgens is proper cracked for speedcams in switzerland or france.
do you have a file called autorad.zip in your ux folder?
if yes, try to disable this file by renaming it
no there is no autorad.zip.
There is only a sys.txt entry with autorad , only required for Pongo Skin !
Try Igo Pal , Igo Israel or Gift
Here GPS Off
Spoiler: too large pic without spoiler 1
Here GPS On
Spoiler: too large pic without spoiler 2
Here GPS Off
Spoiler: too large pic without spoiler 3
Here GPS On
Spoiler: too large pic without spoiler 4
here my sys.txt
Spoiler: sys without spoiler and code
I have found that using this in sys.txt:
[speedcam.disabled_countries]
_FRA=x,x,x,x,x,x,x
_SUI=x,x,x,x,x,x,x
doesn't always negate this original setting in data.zip:
[speedcam.disabled_countries]
_FRA=1,2,3,4,5,11,7
_SUI=1,2,3,4,5,11,7
The solution which I have found always works for me is to remove ALL references to this in sys.txt and comment out, or remove completely, the ORIGINAL setting in data.zip thus:
[speedcam.disabled_countries]
;_FRA=1,2,3,4,5,11,7
;_SUI=1,2,3,4,5,11,7
With the above the speedcams were visible on the map but then the following entries in sys.txt were needed to get the popup warnings to display:
[hva]
hva_countries=""
[warning.hva]
dangerous_zone_enabled=0
dangerous_zone_warn_type=0