As Boki said, this is a device/firmware related issue.
If the modifying of your sys.txt does not change anything, try to change the settings in your device menu : date & time.
You should try to set up your date/time/UTC manually instead of getting the data from the GPS receiver.
It might solve the problem on most "common" devices... At least for those running WinCE.
ScorpionSX,Quote:
Originally Posted by ScorpionSX [Only registered and activated users can see links. Click Here To Register...]
I solved the same problem on my GPS (iGo Primo 2.0.1 with Ultimate skin) by leaving the time zone to manual and setting my time zone in iGo Primo settings and using the following setting in "sys.txt":
[regional.timezone]
reset_os_timezone=0
sync_os_timezone=0
sync_time=0
Although the above setting does not sync the time of the GPS device, it is updating with the correct time. Hope this can solve your problem.
Greetings,
CYK
Issue with above solution is as follows:
- when I change time sync in sys.txt file to 0
- deactivate autosync in igo options manually, set time zone manually and set winter/summer time manually too
Problem:
- when I try to calculate route, the time of arriving is get from system time - not manually set by me time
How to change this in IGO to calculate arrival time from date/time set manually by me, no from system time ?
Actualy those settings
[regional.timezone]
reset_os_timezone=0
sync_os_timezone=0
sync_time=0
for me DID the job :D
My chinesee nav got wrong data from sattelites but time was correct,but i am abble to change time and date manualy in device and cant in primo,in other hand Primo Civic 2.4 was changing THE device time after reciving gps signal and was messing the time and manualy changing was not possible to be saved. To be correct in that case primo was showing correct time on left top corner but 'arrival" time was always inccorect (+3 hours and some minutes). After putting those settings in sys file, Primo wasn;t abble to change device time ,time staye saved and viola all is correct,only corection that may need to be dome is daylight saving time .
Just to add i have also 2012 year chinese nav with 9.6.5 primo which doesn't have any of this issues. I dont know why newest one's have this bug.
:mn:
Thread moved to correct section.
Hi All!Quote:
Originally Posted by xcv [Only registered and activated users can see links. Click Here To Register...]
WayteQ x980BT - [Only registered and activated users can see links. Click Here To Register...] - Tested, perfect results (does not hurt the system, and image resolution)!
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...] Thanks Boki_Srb!
(google translate)
Important tasks:
- Charging the device and connecting to a mains charger (Prohibited on PC)
- the package contains an UPD file, you must first copy this to the root of the SD and make it read-only, then you can copy the other files
- 2GB. SD (you can try 4GB.), FAT32 file system, if necessary, you can only format under WiXp or Win10, because Vista, Win7-8 is not good!
- the device should be turned off, and the card must be inserted and turned on
- if the update does not start, press RESET
Enjoy!
Hi All!
Spoiler: Smart GPS SG742 Rollover Fix
Test results are excellent!
Enjoy!
____________________
Spoiler: Smart GPS SG730 Rollover Fix
Test results are excellent!
Enjoy!
Thanks
But you should also leave directions to those who are not from the Czech speaking area :smile:
Spoiler: How to download
Yes, it really works! Perfect. I wouldn't dare to try xRider patch on x980BT, because it's strictly written not to use it on other devices, but when I read your post i decide to give it a try. I was prepared even to get my device bricked, but at the end, it worked! Thanks for this valuable info! I used 32 GB SD.Quote:
Originally Posted by vaczak [Only registered and activated users can see links. Click Here To Register...]
I am pleased to have helped with the result.:)
You courage is also commendable, which was helped by the 32 GB SD, I wouldn't have thought. :bat: