Thread: Auto speed limit in school zones.

Originally Posted by jards88

Here are the sys.txt settings for AU/NZ:

[speedcam_category:9]
warning_time_intervals_aus="Mo-Fr|8:00-9:30,Mo-Fr|14:30-16:00"
warning_time_intervals_act="Mo-Fr|8:00-16:00"
warning_time_intervals_ans="Mo-Fr|8:00-9:30,Mo-Fr|14:30-16:00"
warning_time_intervals_ant="Mo-Fr|7:00-17:00"
warning_time_intervals_aql="Mo-Fr|7:00-9:00,Mo-Fr|14:00-16:00"
warning_time_intervals_asa="Mo-Fr|0:00-24:00"
warning_time_intervals_ata="Mo-Fr|8:00-9:30,Mo-Fr|14:30-16:00"
warning_time_intervals_avi="Mo-Fr|8:00-9:30,Mo-Fr|14:30-16:00"
warning_time_intervals_awa="Mo-Fr|7:30-9:00,Mo-Fr|14:30-16:00"

warning_time_intervals_nzl="Mo-Fr|8:00-10:00,Mo-Fr|14:00-16:00"
warning_time_intervals_nzn="Mo-Fr|8:00-10:00,Mo-Fr|14:00-16:00"
warning_time_intervals_nzs="Mo-Fr|8:00-10:00,Mo-Fr|14:00-16:00"

warning_time_interval_adjust=2

Cheers, Ian

There are 8 "states" for AUS, they are mapped to postal codes as

Spoiler: .

This post requires you to click the "LIKE this post" button and hit F5 to read this content.

What this mean is you have to be careful when using both _aus for entire Australia and individual states.
Same goes for NZ use of _nzl and

Spoiler: .

This post requires you to click the "LIKE this post" button and hit F5 to read this content.

Originally Posted by osiris4isis

interesting with the "clock" symbol indicating time restricted. That should appear for any speedcam alerts with time restriction and not just exclusively to schoolzones, right?

I would assume so, I guess you could set one up and see what happens. We don't have any time limited speedcams in Aus that I know of anyway so its probably a moot point.

Originally Posted by osiris4isis

How about when you ONLY uses Australia_TomTom_2017.03_170403.spc?

When the Australia_WhereiS_School_Zones_2017.06_170714.spc file is removed there are no school zone balloons at all and there is no warning when approaching the active school zone, but once within the school zone the clock symbol and reduced speed limit are displayed as before.

Hope that helps, Ian

Answer

Spoiler: .

This post requires you to click the "LIKE this post" button and hit F5 to read this content.

Hello,

Just replace the image with an image of the same dimension completely transparent, and keeping the same name !


Bonjour,

Il suffit de remplacer l'image par une images de même dimension totalement transparente, et en gardant le même nom !

EDIT :

Sorry,
I just saw that the subject concerned Primo 2.4!
In this case simply delete the image concerned in the files "speedwarn.bmp", 0,1,2,3,4

Désolé,
Je viens de voir que le sujet concernait Primo 2.4 !
Dans ce cas il faut simplement supprimer l'image concernée dans les fichiers " speedwarn.bmp ", 0,1,2,3,4

You don't delete the images, you makes them transparent.

Originally Posted by jonee

Thanks for your reply osiris4isis. I tried what you suggested but it didn't work. It looks like they are hard coded in the speedcam file.

As an example, I've check the code for Primo24-9.6.29.597461-Israel(28Sep2015) and they are NOT hard coded.

Spoiler: .

This post requires you to click the "LIKE this post" button and hit F5 to read this content.