try this in your sys.txt file port=3 and baud=7200 should work it does in mine.
Hi guys.
I got igo 8.3.2.89704 mips in my car,(mena.co) but it can`t find any GPS signals. I have try to to change the gps baud/port to auto, but this did not help. Any suggestions?
Thanks
try this in your sys.txt file port=3 and baud=7200 should work it does in mine.
Thanks for the reply, but this settings did not work.
And what ports and bauds have you tried?
Do not PM me with questions. That's what a forum is for.
Have tried some different that I have found on various forums
3-9600
2-9600
2-4800
2-57600
3-7200
According to [Only registered and activated users can see links. ]
It seems "MIPS" proggy is flaky, GPS drop in and out.Code:Please Login or Register to see the links
Do not PM me with questions. That's what a forum is for.
most device find port and baud in iGO:
[gps]
port=1
baud=4800
or
[gps]
port=2
baud=57600
IGO .....suggest for your device:
[gps]
port=7
baud=57600
or
[gps]
port=7
baud=38400
you used iGO8 so you can try all the available compbinations inside menu of igO8 to see when iGO8 find port and baud....
you must make only: 5X6=30 combination inside menu to see when iGO8 find gps signal
iGO 8 have auto detection of port and baud. You can easily find it. What is problem?
(Settings > Second tab > GPS > button auto-detection at bottom).
If still have trouble, then check connector, antenna cable, antenna...
And of course, the device itself can be problematic
Last edited by Boki; 17th November 2017 at 10:53 PM.
Thank you for all the answers. I have tried most combinations but still get no GPS signals.
Boki_Srb: I have no auto-detection button on this Igo version. I also have Navitel today on the same built-in nav and this works well. The Navitel map is so old so I thought I would have a newer map with Igo
If Navitel works, see if it tell you what port and speed it's using.
Do not PM me with questions. That's what a forum is for.
Bookmarks