Can`t find GPS signals Igo 8.3.2.89704

[Laffen]

Hi guys.
I got igo 8.3.2.89704 mips in my car,(mena.co) but it can`t find any GPS signals. I have try to to change the gps baud/port to auto, but this did not help. Any suggestions?
Thanks

[igo cruise]

try this in your sys.txt file port=3 and baud=7200 should work it does in mine.

[Laffen]

Thanks for the reply, but this settings did not work.

[osiris4isis]

And what ports and bauds have you tried?

[Laffen]

Have tried some different that I have found on various forums
3-9600
2-9600
2-4800
2-57600
3-7200

[osiris4isis]

According to [Only registered and activated users can see links. ]

Please Login or Register to see the links

It seems "MIPS" proggy is flaky, GPS drop in and out.

[arslankayna]

most device find port and baud in iGO:
[gps]
port=1
baud=4800

or
[gps]
port=2
baud=57600

IGO .....suggest for your device:
[gps]
port=7
baud=57600

or
[gps]
port=7
baud=38400

you used iGO8 so you can try all the available compbinations inside menu of igO8 to see when iGO8 find port and baud....
you must make only: 5X6=30 combination inside menu to see when iGO8 find gps signal

[Boki]

iGO 8 have auto detection of port and baud. You can easily find it. What is problem?
(Settings > Second tab > GPS > button auto-detection at bottom).
If still have trouble, then check connector, antenna cable, antenna...
And of course, the device itself can be problematic

[Laffen]

Thank you for all the answers. I have tried most combinations but still get no GPS signals.

Boki_Srb: I have no auto-detection button on this Igo version. I also have Navitel today on the same built-in nav and this works well. The Navitel map is so old so I thought I would have a newer map with Igo

[osiris4isis]

If Navitel works, see if it tell you what port and speed it's using.