With 6.10 file... Thanks
With 6.10 file... Thanks
Lollypop means if you already have installed a firmware with enabling features logo you can update the firmware to a new official one without loosing all the enabled features-
So you can use an old modded one and then update by webupdater
@laborone
If you don't want to downgrade to fw v6.10, here's the updater for 13/14xx with 6.20: [Only registered and activated users can see links. Click Here To Register...]
Full credits to lolypop000! (all i did was replace the earlier boot.bin with 6.20 boot.bin). ;)
PS: for non-mtk HWID 0972 only.
Check your nuvi HWID before flashing!
Nuvi 12xx FW 6.20 (971)
Nuvi 12xx FW 6.20 MTK (1106)
Nuvi 13xx/14xx FW 6.20 (972)
Nuvi 13xx/14xx FW 6.20 MTK (1104)
Enable features over SD simple method (Full credits to acleite)
Nuvi 12xx FW 6.20 (971) - confirmed working.
Will this also open up the features in a 1100 us/non mtk, or is this just for 1200 and up models?
If you have on your nuvi 1100 one of Hwid writen above, than will work.
If you dont find your Hwid number in post above then send me your gupate.gcd and i will create FW for you ;)
Sorry if this is a repeat question but where do I put the SID files that came with the JCV zip folder?
Many thanks,
Matt
.System/ SID , but not working in 1xxx series
[Only registered and activated users can see links. Click Here To Register...]
You can also use Updater.exe with Windows 7. (You have to have administrator rights of course)Quote:
Originally Posted by dvazg [Only registered and activated users can see links. Click Here To Register...]
1. Turn on nüvi, but don't connect to PC
2. Go into diagnostic mode on nüvi (press battery icon for 5 secs)
3. connect nüvi to PC
4. Updater.exe will recongnize nüvi