Here it is ..[Only registered and activated users can see links. Click Here To Register...]Quote:
Originally Posted by shahnowaz [Only registered and activated users can see links. Click Here To Register...]
Printable View
Here it is ..[Only registered and activated users can see links. Click Here To Register...]Quote:
Originally Posted by shahnowaz [Only registered and activated users can see links. Click Here To Register...]
thanks but cant detect nuvi 765t
can some body explain that to me again pls
At computerQuote:
Originally Posted by shahnowaz [Only registered and activated users can see links. Click Here To Register...]
-Drag rgn on updater.exe
-check USB connection
At Nuvi 765
-Plug in USB
-Push power botton to the right (Lock position)
-Connect to computer
Nuvi will boot up
-Press your finger at middle of screen
-You will see a little "system" indicate nuvi is in pre-boot mode
At Updater.exe
-Click OK.
Good luck :)
Agree this. Just return to 2.50EU from 2.30Sg/MyQuote:
Originally Posted by aekhong [Only registered and activated users can see links. Click Here To Register...]
Its very strange to see it. What is "magic" version number - 2.19??
Great ~ Is there a thread to guide us how to convert back to US firmware ? Thanks.Quote:
Originally Posted by aekhong [Only registered and activated users can see links. Click Here To Register...]
It's easyQuote:
Originally Posted by kentcp [Only registered and activated users can see links. Click Here To Register...]
Make a rgn file to go back US.
-Use RGN_Tool to open original US .gcd
-Override swv to 219
-save to rgn
H/R your unit
Flash with RGN
If boot up normally
Rename folder to original name
H/R again
That's it. !! :)
I notice Garmin force us to using Webupdater to download the US formware. In this case, how to download the US.gcd ? Recently, US firmware released to 3.60. Should convert back to 2.50 then update by webupdate to 3.60 or direct convert back to 3.60 (but need to find a way to download the US.gcd first)
This is direct download linkQuote:
Originally Posted by kentcp [Only registered and activated users can see links. Click Here To Register...]
You can go back to 3.60 without 2.50 first.Code:http://www.garmin.com/software/nuvi37xx_GCDFile__360.gcd
Actually you should download .gcd file for updating later not by updating online by webupdater.
Here is reasons.
1). Webupdater or dashboard will check your HWID out by searching in garmindevice.xml
2). HWID in garmindevice.xml may be wrong., because you may use a modified firmware that contain a wrong HWID within fw_all.bin .,
For example ::For 37xx series :: You can try to use RGN_Tool to make a rgn file
-Use original boot.bin
-Add other regional fw_all.bin override HWID to same as boot.bin
Flash
nuvi boot up
Get HWID from garmindevice.xml and you will find it's wrong HWID
if you connect your unit with webupdater
Your unit may brick with wrong gupdate.gcd send from webupdater.
Thanks so much. I just dl the Sg/Mal firmware but it is .exe format, not .gcd. No idea how to perform the 3rd step.
•File->Open and select your Sg/Mal firmware GCD or RGN file
Try thisQuote:
Originally Posted by kentcp [Only registered and activated users can see links. Click Here To Register...]
- Right click on .exe file
-Extract files
-Then you will get .gcd inside.
Try it :)