-
so, the unit is acting differently - now it shows 'software loading', havent shown this in any previous attempts.... just from curiosity, how long should it show 'software loading' before i say it is hung and effectively dead? updater has closed, it said successful but unit still showing 'software loading'....
no worries on the v3 issue - i read it and was kinda figuring you knew indicated other issues as you mentioned....
but at least i have made every good effort and proved what i knew from the start with garmin - there is a way to bootstrap these things...
-
It should have tried to re-boot at around the same time Updater finished. Force it off and see if there's anything new created on the card, Update.log and 41.bin as i said in previous post.
-
so this is the 'update' file:
rrgn,41,1:/Garmin/41.bin
reboot
there is no 41.bin file....
however, i did check g7towin again:
software version: 7.3
id: 1113
unit id: 3828582182
usb comm via bulk pipe
i did try your sd card method a 2nd time:
shows on my laptop as successful, and closes when i say 'ok' - but gps doesnt reset just keeps software loading message...
-
Ok then, it's some progress but maybe not enough. Since the modded V7.30 ramloader flashed properly at least G7ToWin is reporting correctly.
But it's what is in the update.log i need, if that file is present. The content of the update.txt file is what you've given me.
If there's no LOG file created this isn't really working.
