Hi!
Turn on device, wait 1-2 seconds and then put your finger anywhere on screen.
You should see "System" while you have your finger on screen.
My English is not very well too.
Послато са F3311 уз помоћ Тапатока
Hi to all,
This is my first post.
I have Nuvi 2569LMT-D and I cant get it in pre-boot
Tryed holding finger on all corners,still nothing
Tryed in the center- nothing.
If anybody has info on this model- I will appreciate.
Thank you and please excuse my English.
Last edited by ALeader; 9th November 2018 at 01:19 PM.
Hi!
Turn on device, wait 1-2 seconds and then put your finger anywhere on screen.
You should see "System" while you have your finger on screen.
My English is not very well too.
Послато са F3311 уз помоћ Тапатока
@Aleader
It might not be in Mass Storage mode. I don't think you can go into preboot if its in MTP mode. Touch the 'speed' field on the main page and then hold the speedometer for ~6 seconds, scroll down to MTP Setting and select Mass Storage there.
I forgot to mention that it was in Mass Storage all the time.
@Miroslav
Thank you ,but your way not working in my case.I tryed many times - no joy.
Update!
The problem solved- It is exactly as Miroslav said.
You must power on and quickly put finger anywhere on the screen.
Thanks
Bookmarks