-
fenix 5S software version 5.10
as of August 9, 2017
(3.65 MB)
Code:
http://www8.garmin.com/support/download_details.jsp?id=11431
http://download.garmin.com/software/fenix5S_510.gcd
Changes made from version 4.10 to 5.10:
- Added support for Treadmill Calibration. When saving a Treadmill running activity for the first time, you will be given the option to enter the distance that the treadmill recorded. This will improve the accuracy of the distance that the watch records during future treadmill activities. You can also choose to calibrate when saving any treadmill activity. When you are done with your activity, stop the timer, scroll down to 'Calibrate & Save.' Then, enter the distance that the treadmill recorded. For accuracy, these options become available when recording an activity longer than 1 mile or 1.5 kilometers.
- Added support for Connect IQ SDK 2.3.2.
- Added support for viewing distances to Golf hazards and course targets.
- Added support for persisting Heart Rate data on the widget across a power cycle.
- Added support for viewing smart notifications on Varia Vision.
- Added support for configuring the Controls menu with more than 10 items.
- Added support for accessing Altimeter, Barometer and Compass widgets through the Controls menu.
- Added support for adjusting the device backlight using the Controls menu.
- Added support for 'Flashlight'. This will be accessible from the System Hotkeys and the Controls menu.
- Improved the altimeter and barometer locking mechanism for water sport activities.
- Improved the readability of long golf course names on device.
- Fixed an issue where the user might see a blank black banner while navigating a shorter course.
- Fixed an issue where the device would crash when attempting to continue a paused golf round.
- Fixed an issue where the Virtual partner page was being incorrectly added to the activity data page loop while navigating.
- Fixed a potential issue where large elevation values were being reported on the summary page for certain activities.
- Fixed a potential issue where certain activities would show extremely high total elapsed time when trying to save them.
- Fixed an issue where the gesture backlight was not working as expected during Do Not Disturb.
- Fixed an issue where the heart rate target gauge would not work as expected during a workout when using wrist based heart rate.
- Fixed an issue where the directions displayed on the Dog Tracker widget would not update in real time.
- Fixed a potential issue where the data field page may have ghost lines when visiting the DogTracker page during an activity.
- Fixed an issue where the device may not respond to button presses when using the lap key during a lap Swimming workout with Drill log disabled.
- Fixed an issue where the backlight would turn off (outside of an activity) even though the backlight setting was set to 'No Timeout'.
- Fixed an issue where routes created on Basecamp did not have elevation information after being transferred to the device.
- Fixed an issue where the device would appear to be frozen, when connected to a computer.
- Fixed an issue where the cog value could not be set to a value higher than 45, while setting up a Shimano Di2 Shifter.
-
fenix 5S software version 5.10 Beta
as of August 11, 2017
Download (5.50 MB)
Code:
http://download.garmin.com/software/fenix5S_510Beta.zip
Code:
http://www8.garmin.com/support/download_details.jsp?id=11661
Changes made from version 5.08 to 5.09:
- Fixed Fenix Chronos Power Meter Drops
-
fenix 5S software version 5.30
as of August 16, 2017
Code:
http://www8.garmin.com/support/download_details.jsp?id=11431
(3.65 MB)
Code:
http://download.garmin.com/software/fenix5S_530.gcd
Changes made from version 4.10 to 5.30:
- Added support for Treadmill Calibration. When saving a Treadmill running activity for the first time, you will be given the option to enter the distance that the treadmill recorded. This will improve the accuracy of the distance that the watch records during future treadmill activities. You can also choose to calibrate when saving any treadmill activity. When you are done with your activity, stop the timer, scroll down to 'Calibrate & Save.' Then, enter the distance that the treadmill recorded. For accuracy, these options become available when recording an activity longer than 1 mile or 1.5 kilometers.
- Added support for Connect IQ SDK 2.3.2.
- Added support for viewing distances to Golf hazards and course targets.
- Added support for persisting Heart Rate data on the widget across a power cycle.
- Added support for viewing smart notifications on Varia Vision.
- Added support for configuring the Controls menu with more than 10 items.
- Added support for accessing Altimeter, Barometer and Compass widgets through the Controls menu.
- Added support for adjusting the device backlight using the Controls menu.
- Added support for 'Flashlight'. This will be accessible from the System Hotkeys and the Controls menu.
- Improved the altimeter and barometer locking mechanism for water sport activities.
- Improved the readability of long golf course names on device.
- Fixed an issue where the user might see a blank black banner while navigating a shorter course.
- Fixed an issue where the device would crash when attempting to continue a paused golf round.
- Fixed an issue where the Virtual partner page was being incorrectly added to the activity data page loop while navigating.
- Fixed a potential issue where large elevation values were being reported on the summary page for certain activities.
- Fixed a potential issue where certain activities would show extremely high total elapsed time when trying to save them.
- Fixed an issue where the gesture backlight was not working as expected during Do Not Disturb.
- Fixed an issue where the heart rate target gauge would not work as expected during a workout when using wrist based heart rate.
- Fixed an issue where the directions displayed on the Dog Tracker widget would not update in real time.
- Fixed a potential issue where the data field page may have ghost lines when visiting the DogTracker page during an activity.
- Fixed an issue where the device may not respond to button presses when using the lap key during a lap Swimming workout with Drill log disabled.
- Fixed an issue where the backlight would turn off (outside of an activity) even though the backlight setting was set to 'No Timeout'.
- Fixed an issue where routes created on Basecamp did not have elevation information after being transferred to the device.
- Fixed an issue where the device would appear to be frozen, when connected to a computer.
- Fixed an issue where the cog value could not be set to a value higher than 45, while setting up a Shimano Di2 Shifter.
-
fenix 5S software version 5.33 Beta
as of August 25, 2017
Code:
http://www8.garmin.com/support/download_details.jsp?id=11661
Download (5.62 MB)
Code:
http://download.garmin.com/software/fenix5S_533Beta.zip
Changes made from version 5.30 to 5.33:
- Fixed an issue in which optical heart rate became much less precise during an activity if Connect IQ apps were installed on the watch
-
fenix 5S software version 5.40 Beta
as of August 29, 2017
Code:
http://www8.garmin.com/support/download_details.jsp?id=11661
Download (5.62 MB)
Code:
http://download.garmin.com/software/fenix5S_540Beta.zip
Changes made from version 5.33 to 5.40:
- Fixed an issue in which optical heart rate became much less precise during an activity if Connect IQ apps were installed on the watch
- Fixed an issue in which the prompt to enter scores between holes during Golf activities was not shown
-
fenix 5S software version 5.40
as of August 30, 2017
Code:
http://www8.garmin.com/support/download_details.jsp?id=11431
(3.65 MB)
Code:
http://download.garmin.com/software/fenix5S_540.gcd
Changes made from version 5.30 to 5.40:
- Fixed an issue in which optical heart rate became much less precise during an activity if Connect IQ apps were installed on the watch.
- Fixed an issue in which the prompt to enter scores between holes during Golf activities was not shown.
-
fenix 5S software version 5.83 Beta
as of September 11, 2017
Code:
http://www8.garmin.com/support/download_details.jsp?id=11661
Download (5.65 MB)
Code:
http://download.garmin.com/software/fenix5S_583Beta.zip
Changes made from version 5.40 to 5.83:
- Added Rep Counting to the Strength activity. To enable Rep Counting, ensure that Strength Settings > Rep Counting is enabled in the Strength activity. Start the timer to automatically count reps during sets. Press the lap key to rest between sets. You can edit your last set's number of reps and weight during a rest period. Press the lap key to advance to the next set.
- Download Strength workouts from Garmin Connect.
- Rep counting is also available in cardio activities when following a cardio workout downloaded from Garmin Connect.
- Added All-Day Stress. To view the Stress widget, hold the Up key from any widget, and select Add Widget > Stress. You can view your current stress measurement on the widget page. Press the enter key to view a graph of your stress over the last four hours. Press Down to access the Four-Fold Breath relaxation timer.
- Added support for manual calibration of the Barometer. (Settings > Sensors & Accessories > Barometer > Calibrate)
- Added support for Hourly Alerts. (Settings > System > Time > Alerts > Hourly)
- Improved device key handling while using Connect IQ apps.
- Improved the course navigation icons for better visibility and contrast.
- Fixed an issue where the device would not transition to the climb screen while using Auto Climb in certain situations.
- Fixed an issue where the sunrise and sunset alarms were not working as expected.
- Fixed an issue where the elevation plot for a single activity in a multi-sport, would display the elevation history of the entire activity.
- Fixed an issue causing Varia UT800 Smart Headlights to periodically disconnect or power off during a ride.
- Fixed an issue causing the Running Dynamics Pod to disconnect when using Connect IQ Apps.
- Fixed a potential issue preventing a course from being joined when not joining it at the start.
- Fixed a potential issue causing Personal Records to be reported inaccurately.
-
fenix 5S software version 5.84 Beta
as of September 14, 2017
Code:
http://www8.garmin.com/support/download_details.jsp?id=11661
Download (5.72 MB)
Code:
http://download.garmin.com/software/fenix5S_584Beta.zip
Changes made from version 5.83 to 5.84:
- Improved the connection reliability of ANT sensors during activities.
-
fenix 5S, Sensor Hub software version 4.10
as of September 22, 2017
Code:
http://www8.garmin.com/support/download_details.jsp?id=11433
(397 KB)
Code:
http://download.garmin.com/software/fenix5S,SensorHub_410.gcd
-
fenix 5S software version 6.00
as of September 22, 2017
Code:
http://www8.garmin.com/support/download_details.jsp?id=11431
(3.74 MB)
Code:
http://download.garmin.com/software/fenix5S_600.gcd
Changes made from version 5.40 to 6.00:
- Added support for Rep Counting during Strength and Cardio workouts which can be created on Garmin Connect Web and Garmin Connect Mobile. To enable Rep Counting, ensure that Settings > Activities & Apps > Strength > Rep Counting is enabled. Start the timer to automatically count reps during sets. Press the lap key to rest between sets. You can edit your last set's number of reps and weight during a rest period. Press the lap key to advance to the next set.
- Added support for All-Day Stress. To view the Stress widget, hold the Up key from any widget, and select Add Widget > Stress. You can view your current stress measurement on the widget page. Press the enter key to view a graph of your stress over the last four hours. Press Down to access the Four-Fold Breath relaxation timer.
- Added support for setting up Wi-Fi Networks on device. After syncing with Garmin Express or Garmin Connect Mobile at least once, go to Settings > Wi-FI > Add Network to search for Wi-Fi networks. Select a network. If the network is secure, enter its password to join it.
- Added support for manual calibration of the Barometer. (Settings > Sensors & Accessories > Barometer > Calibrate)
- Added support for Hourly Alerts. (Settings > System > Time > Alerts > Hourly)
- Improved device key handling while using Connect IQ apps.
- Improved the course navigation icons for better visibility and contrast.
- Fixed an issue causing Varia UT800 Smart Headlights to periodically disconnect or power off during a ride.
- Fixed an issue causing the Running Dynamics Pod to disconnect when using Connect IQ Apps.
- Fixed a potential issue preventing a course from being joined when not joining it at the start.
- Fixed a potential issue causing Personal Records to be reported inaccurately.
- Fixed an issue where the device would not transition to the climb screen while using Auto Climb in certain situations.
- Fixed an issue where the sunrise and sunset alarms were not working as expected.
