Changes made from version 10.02 to 10.10:
• Fixed an issue where ConnectIQ watch faces would intermittently fail to load from the watch face selection menu.
20th December 2017, 07:21 PM
Genius3
fenix Chronos software version 10.10
as of December 19, 2017
Added the ability to access 'Broadcast Heart Rate' from the Controls menu (Settings > Controls) as well as through the system Hot keys (Settings > System > Hot Keys).
Improved the smart notification text layout for longer messages.
Improved the VO2 Max gauge in the Performance widget so that the arrow indicator is more accurate.
Improved syncing of user settings and statistics between the device and Garmin Connect. Addresses issues like alarms being changed unexpectedly.
Fixed an issue causing the Lactate Threshold page in the Performance widget to not show if an auto-detected BPM value is the same as one that was manually entered.
Fixed an issue where the entered angle field would change its contents to a bad value within Jumpmaster.
Fixed an issue where the scrollbar would disappear momentarily when adding a chart page (for example altimeter) to the activity data field page loop.
Fixed an issue where the data field 'Gear Battery' showed no value on the Varia Vision.
Fixed an issue where laps were not being recorded correctly while performing a lactate threshold test.
11th January 2018, 01:09 AM
Genius3
fenix Chronos software version 10.56 Beta
as of January 9, 2017
Added the ability to access 'Broadcast Heart Rate' from the Controls menu (Settings > Controls) as well as through the system Hot keys (Settings > System > Hot Keys).
Added remote display support for the Estimated Total Distance data field.
Improved syncing of user settings and statistics between the device and Garmin Connect. Addresses issues like alarms being changed unexpectedly.
Improved the accuracy of All-Day Stress tracking.
Improved the smart notification text layout for longer messages.
Improved the VO2 Max gauge in the Performance widget so that the arrow indicator is more accurate.
Fixed an issue where the Length data field was off by one during a pool swim activity.
Fixed an issue where the device was repeatedly reporting wheel size detected notifications during a bike activity.
Fixed an issue where certain display artifacts were not cleared from the watch face for certain configurations.
Fixed an issue where the elevation graph did not update during a course if the user stayed on the elevation page.
Fixed an issue where the Heart Rate graph would intermittently stop updating.
Fixed an issue causing the Lactate Threshold page in the Performance widget to not show if an auto-detected BPM value is the same as one that was manually entered.
Fixed an issue where the entered angle field would change its contents to a bad value within Jumpmaster.
Fixed an issue where the scrollbar would disappear momentarily when adding a chart page (for example altimeter) to the activity data field page loop.
Fixed an issue where the data field 'Gear Battery' showed no value on the Varia Vision.
Fixed an issue where laps were not being recorded correctly while performing a lactate threshold test.
24th January 2018, 06:07 PM
Genius3
fenix Chronos software version 10.91 Beta
as of January 23, 2017
Added support for a Sunrise & Sunset widget. Settings > Widgets > Add Widgets > Sunrise & Sunset.
Added support for an Alternate Time Zones Widget. Settings > Widgets > Add Widgets > Alt. time Zones.
Added a setting to display a calibration prompt when using a power meter. When using a Vector, this will also allow the user to set the power meter crank length. Menu > Settings > Sensors & Accessories > Power Meter > Calibration Prompt.
Fixed an issue where the altitude on device wasn't accurate when using the Jumpmaster app.
Fixed an issue where Broadcasting Heart Rate was not working as expected, if accessed from the power controls menu.
Fixed an issue where Flashlight would turn off when using gestures.
6th February 2018, 06:34 PM
Genius3
fenix Chronos software version 10.93 Beta
as of February 5, 2017
Added support for a Sunrise & Sunset widget. Settings > Widgets > Add Widgets > Sunrise & Sunset.
Added support for an Alternate Time Zones Widget. Settings > Widgets > Add Widgets > Alt. time Zones.
Added a setting to display a calibration prompt when using a power meter. When using a Vector, this will also allow the user to set the power meter crank length. Menu > Settings > Sensors & Accessories > Power Meter > Calibration Prompt.
Improved Bluetooth connectivity with Huawei phones.
Improved the accuracy of resting heart rate measurements.
Fixed an issue where the altitude on device wasn't accurate when using the Jumpmaster app.
Fixed an issue where Flashlight would turn off when using gestures.
Fixed an issue where Broadcasting Heart Rate was not working as expected, if accessed from the power controls menu.
16th March 2018, 01:37 PM
Genius3
fenix Chronos software version 11.54 Beta
as of March 15, 2017
Added the ability to save Stopwatch recording as an activity. Go to the Stopwatch control, and start the timer. Stop the timer, and select Done. You can then save your activity, which will appear in your History.
Fixed an issue causing an incorrect time to be displayed.
Fixed an issue preventing time zones with Arabic characters from being displayed in the Time Zone widget.
Fixed a potential crash when using Group LiveTrack.
Fixed an issue resulting in high cadence and calorie values when using some power meters.
Fixed a potential issue causing the 'Wheel Size Computed' notification to appear frequently.
Fixed an issue causing the Elevation graph to not update frequently.
Fixed an issue causing some workout prompts from a Training Calendar to be repeated after completing the workout.
Fixed an issue where the grade data field was displaying incorrect data.
Fixed an issue with calendars details page where the title and location information were not displaying properly.
12th May 2018, 09:44 PM
Genius3
fenix Chronos software version 11.99 Beta
as of May 11, 2017
Added support for communication with a Garmin Xero A1i Bow Sight. The Bow Sight is capable of sending Laser Locate waypoints to the watch. These are accessible from the XERO widget (Settings > Widgets > Add Widgets > XERO) and can be further used to navigate to.
Added support for communication with a Garmin inReach Mini. (Settings > Widgets > Add Widgets > inReach) The widget acts as a remote and allows one to send preset texts, customized quick texts and trigger a SOS message.
Added support for selecting alternate locations within the Sunrise and Sunset widget. (Widget > Menu > Location)
Added support for Garmin Vector 3 power meter software updates.
Fixed a possible crash that could occur when downloading stored heart rate data from a Garmin HRM-Tri or HRM-Swim.
Improved the accuracy of the pace/speed target gauge during workouts.