Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Likes Likes:  0
Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Jan 2015
    Location
    XXX
    Posts
    14
    Rep Power
    0

    Default Nuvi 780: Garmin device is unable to program the requested memory region

    After following the helpful advice on this [Only registered and activated users can see links. ], I was able to reflash and use the Nuvi 780 for a couple of months.

    Last week it went into the continuous reboot loop again. I tried to reflash the Nuvi 780 in pre-boot mode (Garmin drivers installed) using GarminCure3 v0.1 to load the Cure with nuvi7xx_GCDfile__540.gcd and nuvi7xx_GCDfile__490.gcd.

    The usb device is recognized by GarminCure3.exe but right before erasing to flash using the cure, it gives the following error:

    ZmRSmV3

    I've tried flashing from Win 7 32 and 64bit machines, ran GarminCure3 with admin rights, changed USB cables, ensured no SD Card is inserted into the slot, and tried with two .GCD file versions. Same error every time.

    Hoping that flash chip is not hosed for good and a work around maybe possible.

  2.    Advertissements


  3. #2
    Important User Nuvi 780: Garmin device is unable to program the requested memory region
    Nuvi 780: Garmin device is unable to program the requested memory regionNuvi 780: Garmin device is unable to program the requested memory regionNuvi 780: Garmin device is unable to program the requested memory regionNuvi 780: Garmin device is unable to program the requested memory regionNuvi 780: Garmin device is unable to program the requested memory regionNuvi 780: Garmin device is unable to program the requested memory regionNuvi 780: Garmin device is unable to program the requested memory region
    catymag's Avatar
    Join Date
    Nov 2007
    Location
    light side
    Posts
    15,508
    Rep Power
    5042

    Default

    Have you formatted nuvi with RMPrepUSB after flashing cure two months ago, or did you delete files only?
    Have you made NV backup after earlier cure success?
    Does pc see you nuvi?
    l9ebnsm
    You have to navigate to get to the good.

    Galaxy S5 Kitkat 4.4.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / Nuvi 66 / Oregon 600

  4. #3
    Member
    Join Date
    Jan 2015
    Location
    XXX
    Posts
    14
    Rep Power
    0

    Default

    1. I formatted the Nuvi 780 with RMPrepUSB last time around and installed files freshly
    2. Unfortunately no
    3. The device is currently in continuous reboot. The drive does not appear in explorer. When I use the pre-boot sequence, the device appears in Updater.exe and allows me initiate a cure. However, the cure fails with the Garmin device is unable to program the requested memory region error.

 

 

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •