Thanks Catymag,
I have tried RMPRepUSB but this program couldn't detect Garmin drive (show 0 drive).
Note: Even I install Garmin USB driver but my PC not show garmin usb drive.
Garmin updater could detect USB when I enter in pre-boot mode only.
For normal, PC and RMPRepUSB couldn't detect USB drive.
Highly appreciated other advice too.
Thanks,
JUR
Are you using RMPrepUSB ALLDRIVES ?
[Only registered and activated users can see links. Click Here To Register...]
@juryang
Do you try with procedure in previous page in post #9 ?
You must first install cure and then prepusb will see your device.
juryang
Nuvis with healthy hardware shouldn't reboot when a firmware is flashed in the pre-boot mode.
Learn how to flash a firmware before playing with RMPREPUSB and GarminCure3.
Catymag and lolypop000,
Thanks for your advise, Anyway I always keep press / hold on top left of screen after enter in pre-boot mode.
Any try to flash within 10 sec. but it's always reboot and constantly error every time.
But I have some abnormal before flashing could start and error is .. It's always error as "No update are available for your product".
I have to click "OK" in updater several time til it could start the flashing initialization then Nuvi reboot..
Is it some thing wrong with my cure file..
Note: I cure it by downloaded file as..
- nuvi13xxand14xxseries_GCDFile__620.gcd
- nuvi13xxand14xxseries_GCDFile-MTK__620.gcd
and get the out put file as.. 097201000620.rgn (in generated temp folder)..
And I have to move updater in above temp file before executing it.
Is my curing correct.?
Any further advice is appriciated..
JUR
I have tried it both in WinXP & Win7 but the result is same..
Nuvi constantly reboot and error..
You must use the right HWID rgn file, what is your device HWID? Do you have a Nuvi back up?
Or try to use [Only registered and activated users can see links. Click Here To Register...]
If it's Thai , it's can be HWID 1133, but check it! Dont flash a firmware for different HWID.
Dear Juryang,
You can refer to my post when i'm having same problem like you with my Nuvi 2465,
[Only registered and activated users can see links. Click Here To Register...]
