Try flash your region41 on nuvi and you will see if work or not.
Printable View
Try flash your region41 on nuvi and you will see if work or not.
Try to load 3490 version 7.10
Using Garmincure 3 in original mode.
Are you sure that you do not have a corrupt file in the Nuvi. ?
Already tried FW 7.10. Even now I'm with 7.10.Quote:
Originally Posted by dasilvarsa [Only registered and activated users can see links. Click Here To Register...]
After format to have a corrupt file? As I have said - unit did not create a GarminDevice.xml file, loaded 2 different options of xml - no change.
@ popotnik - I'll try this evening and will report.
You can not load garmidevice.xmlQuote:
Originally Posted by isg [Only registered and activated users can see links. Click Here To Register...]
This file is created by the boot process when full boot is executed.
I'm trying to find out which region holds this info, It is most likely to be region 41.
Did you try to put back files backup ? /.system etc etc
Can 3490 boot without files ? like nuvi 1300 can !
Reg 41 upload unfortunately did not change the situation :( .
@dasilvarsa
Yes I have copied all file structure but unit did not recognize any audio - missing, text version unknown, GPS Firmware - 0.00.
In other words - no change.
Try to erase region 91.
The command line should looks like this, am I right?
ergn,91
reboot
That will erase region 91.
Loly, should he back up 91 first? Does it contain anything essential?
I suggest that you do the following:
1) Flash the original 37xx firmware by renaming 110101000500.rgn to 137601000500.rgn.
Here is the original GCD:
2) As far as I understand you're able to run update.txt scripts.Code:http://www.garmin.com/software/nuvi37xx_GCDFile__500.gcd
Then try running the following script:
Please, use the following RGN when running the script: [Only registered and activated users can see links. Click Here To Register...]Code:rrgn,14,1:/14.bin
rrgn,41,1:/41.bin
ergn,41
rrgn,91,1:/91.bin
ergn,91
ergn,48
reboot
And post the contents of your SD card here.
3) Use QuickCure3-with-flasher (or GarminCure3, whichever works) and format the internal flash drive as suggested [Only registered and activated users can see links. Click Here To Register...], and create Garmin folder.
4) Flash the original firmware linked above and check if the device boots completely and creates GarminDevice.xml.
[Only registered and activated users can see links. Click Here To Register...]
File is encrypted. Password in PM to kunix and some other members which might have interest. If someone else is interested by results will receive password in PM only as reg 41 present in the archive.
Now I should interrupt for hour or two but in any case report will follow soon.