hi man
just do it but nothing else.
I pressed the button during the startup but the result is the same
only a GARMIN picture and no usb connection
Is there a sequence to start ?
Or another way to reflash ?
Ok
i'll came to test
hi man
just do it but nothing else.
I pressed the button during the startup but the result is the same
only a GARMIN picture and no usb connection
Is there a sequence to start ?
Or another way to reflash ?
Last edited by jpnos; 12th February 2013 at 11:16 AM.
Hi Alexander 2010
this is my work
But the two label down the int position are connected ? ( black line to show)
[Only registered and activated users can see links. ]
As you can see i used two wire and the int is out so in the future may be i can use without deassemble the radio
But the problem is every bricked system
It's same not working
Any idea ?
Last edited by jpnos; 12th February 2013 at 12:59 PM.
Hi man
never answer ne idea ?
Can we reflash directly the arm processor ?
or the internal sandisk ?
Is possible to find the electric diagram of this unit?
Bootloader is dead... it is bad news.
there is the way to reflash the arm processor ?
One question. When you pressing Nav button on front panel - see you Garmin logo or blach screen?
I just see Logo GARMIN that is write in white with a triangle blue on the up of the N
Classical logo GARMIN
Do you install Garmin usb drivers on Pc?
Code:Please Login or Register to see the links
Good Morning
yes I had installed the usb driver ...
I don't have the connection .... but I have a very good laboratories so I can flash ythe microprocessor.
Bookmarks