in the file". txt" write
rrgn,154,2:/154.bin
reboot
Printable View
in the file". txt" write
rrgn,154,2:/154.bin
reboot
@stasboom
1. Are you certain you've used the correct Ldr.bin (boot.bin) for your device?
2. Is the command in a file named ". txt" as you said? If so, ONLY Update.txt is recognized.
3. Is there a file last_id.bin present?
4. Is Update.log present? If it is, please post it's content.
The File "Ldr.bin" I think is correct:
1. I downloaded from your Navigator to a file called "GUPDATE.GCD" from the folder "system"
opened its programme RGN Tool
saved as "boot.bin"
renamed "Ldr.bin"
2. Created file "Update.txt"
rrgn,154,2:/154.bin
reboot
3. On the memory card created a folder "Garmin" --- "Updater" --- "1948" and copied there the "Ldr.bin" and "Update.txt"
File "last_id.bin" and "Update.log" no.
nuvi 26x9 has two possible HWIDs, 1948 (C4 chip) and 1772. Maybe you're using correct Ldr.bin but in a wrongly named folder. Double check your device's HWID: [Only registered and activated users can see links. Click Here To Register...]
HWID I looked in the file "GarminDevice.xml"
<PartNumber>006-B1948-00</PartNumber>
[Only registered and activated users can see links. Click Here To Register...]
I think I'm doing everything correctly, but nothing happens.(((:confusion:
Here is how I do "Ldr.bin"
[Only registered and activated users can see links. Click Here To Register...]
It certainly appears that you have done everything correctly. There remains some possibilities however: (i) Ldr.bin is faulty, or (ii) you have a space at the end of the first line of update.txt (i.e. "rrgn,154,2:/154.bin "), or (iii) your microSD is flaky. Here's a zipped Ldr.bin from V8.60 HWID 1948:
Spoiler:
The MD5 of the extracted Ldr.bin should be 504C567BA05732864EDAB21984185D5D
Try another card if your Ldr.bin and rrgn command are both ok.