Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Member
    Join Date
    Aug 2012
    Location
    Germany
    Posts
    22
    Rep Power
    28

    Default 3590LMT - Screenshots 3D Traffic with GTM36

    Hi,
    i made some screenshoots about the 3D Traffic Function with a GTM36 Receiver:

    First off all, here are a screenshot about the firmware etc.:

    [Only registered and activated users can see links. ]


    To receive traffic informations it is necessary to connect the cable to the gps and
    to the power supply.

    Then you have to activate the traffic-information-service ont he ttraffic menue on the GPS

    [Only registered and activated users can see links. ]


    After 3-5 minutes, the first traffic informations are coming in....;-)....:

    [Only registered and activated users can see links. ]



    [Only registered and activated users can see links. ]



    [Only registered and activated users can see links. ]

  2.    Advertissements


  3. #2
    Member
    Join Date
    Aug 2012
    Location
    Germany
    Posts
    22
    Rep Power
    28

    Default

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

  4. #3
    Member
    Join Date
    Aug 2012
    Location
    Germany
    Posts
    22
    Rep Power
    28

    Default

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

  5. #4
    Navigation software expert 3590LMT - Screenshots 3D Traffic with GTM36
    3590LMT - Screenshots 3D Traffic with GTM363590LMT - Screenshots 3D Traffic with GTM363590LMT - Screenshots 3D Traffic with GTM36
    lolypop000's Avatar
    Join Date
    May 2010
    Location
    EU
    Posts
    2,362
    Rep Power
    841

    Default

    Can you please add also picture from developer info?

    When you go on view map on right side of screen press on speed and you will see speedometer
    press in center of speedometer for 10 sec and you will see new window(here where you can change MTP to mass storage)
    you will find here developer info and when you press you press 1x down arow and you will see GTM info and Traffic status.
    Please if you can take screen shot of this window.

    p.s.
    Can you upload your RemoteSW folder,please?
    Last edited by lolypop000; 28th August 2012 at 10:05 AM.

  6. #5
    Member
    Join Date
    Aug 2012
    Location
    Germany
    Posts
    22
    Rep Power
    28

    Default

    ...and here now the developer infos as requested i hope........;-).......:

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

  7. #6
    Member
    Join Date
    Aug 2012
    Location
    Germany
    Posts
    22
    Rep Power
    28

    Default

    [Only registered and activated users can see links. ]

    .............do you need some more screenshots...........??

  8. #7
    Navigation software expert 3590LMT - Screenshots 3D Traffic with GTM36
    3590LMT - Screenshots 3D Traffic with GTM363590LMT - Screenshots 3D Traffic with GTM363590LMT - Screenshots 3D Traffic with GTM36
    lolypop000's Avatar
    Join Date
    May 2010
    Location
    EU
    Posts
    2,362
    Rep Power
    841

    Default

    I dont need more screenshot thank you for this.
    I only need remote SW from your nuvi from .System folder if you can please upload it and your TrafficProvider.xml.
    Then will try if my GTM36 will work becouse then i will have all data like you.

  9. #8
    Member
    Join Date
    Aug 2012
    Location
    Germany
    Posts
    22
    Rep Power
    28

    Default

    no problem:

    remoteSW as zip-file
    Attached Files Attached Files

  10. #9
    Member
    Join Date
    Aug 2012
    Location
    Germany
    Posts
    22
    Rep Power
    28

    Default

    and the TrafficProvider.xml............also as a zip-file...............

    Jope it works..............let me known..........;-)
    Attached Files Attached Files

  11. #10
    Navigation software expert 3590LMT - Screenshots 3D Traffic with GTM36
    3590LMT - Screenshots 3D Traffic with GTM363590LMT - Screenshots 3D Traffic with GTM363590LMT - Screenshots 3D Traffic with GTM36
    lolypop000's Avatar
    Join Date
    May 2010
    Location
    EU
    Posts
    2,362
    Rep Power
    841

    Default

    I try but no luck,still no Traffic data from GTM36

 

 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •