@yaguis
Here is for your HWID,sorry for wrong previous file.
HWID 1091
[Only registered and activated users can see links. Click Here To Register...]
Printable View
@yaguis
Here is for your HWID,sorry for wrong previous file.
HWID 1091
[Only registered and activated users can see links. Click Here To Register...]
In watching your 3 videos:
1. Disconnect your computer from the internet. Or at a minimum, block access to TCP ports 445 and 139 in the/a firewall.
2. Disable your computers AUTORUN "feature' on your removable drives(ie Garmin)
3. Re-attempt running RMPREUSB
On the chance that the above allows you to to properly flash the nuvi, do not plug the nuvi back in until you have updated the operating system(Windows Update) and the virus signature files of your anti-virus software _and_ completed a FULL system scan of your computer.
You say your computer is clean and virus free. I say it is not. Watching the videos proves me right, you have an infected computer.
Disconnect your computer from the internet. DO NOT simply block ports 445 and 139 as I imply above.Quote:
Originally Posted by Texas Star [Only registered and activated users can see links. Click Here To Register...]
Sorry for the confusion.
Texas Star, thanks for your effort but the problem is not in the operating system. because in linux happens too, the windows virus cannot infect in linux enviroment, so the problem is in the internal memory of the nuvi. And now i can confirm this after try the new cure of lolypop000.Quote:
Originally Posted by Texas Star [Only registered and activated users can see links. Click Here To Register...]
more close to solve,i'm put the cure its hangs on erasing screen (wait 1 hour), abort the process and system reboots continuosly, so i put the cure that you send me first time in the page 1 of this post . Well now get usb mass storage without format and without virus finally!Quote:
Originally Posted by lolypop000 [Only registered and activated users can see links. Click Here To Register...]
but the same problem as memory in read only mode.
Try to format the usb with rmprepusb, windows formatting, low level format , and try the webupdater, all programs works fine until i replug the garmin , when all back to the disk without format, so i'm really convinced that the way to solve is with a firmware cure that put the memory in read/write mode.
Thanks again
With imdisk i create an image of the initial state of the nuvi memory with the virus an other modiy without the virus. if for some reason its necessary for study to get a cure just tell me and i upload to a server.
i try to put with a sd card, but mine is 128 mb card so i try this command :
copy_image,0:/e:/nuviwithoutvirus.img
copy_image,e:/nuviwithoutvirus.img
reboot
where e: is my hard disk
but the result was an error
Parsing "copy_image,0:/e:/nuviwithoutvirus.img"
Error
Parsing "copy_image,e:/nuviwithoutvirus.img"
Error
Parsing "reboot"
thank the effort to all !!
Disable AUTORUN/AUTOPLAY and try that again. Please report back the results.Quote:
Originally Posted by yaguis [Only registered and activated users can see links. Click Here To Register...]
do you refer to a windows autorun? when i'm mean to put the sd card i mean in the garmin not in the pc and copy_image are commands of LDR of the garminQuote:
Originally Posted by Texas Star [Only registered and activated users can see links. Click Here To Register...]
it's explained in my post 27, may be you should read it ;)
i'm confused at this moment i dont have any virus, what has to do the windows autorun with the execution of LDR.bin in the sdcard mounted on the garminQuote:
Originally Posted by catymag [Only registered and activated users can see links. Click Here To Register...]
Can you explain. please
Thanks