when I formatted in fat32 folder options was set up this way
What's your Dashboard? sorry but I'm not very good and I am a neophyte of pc and I do not have good English!
webupdater does not recognize my garmin!
when I formatted in fat32 folder options was set up this way
What's your Dashboard? sorry but I'm not very good and I am a neophyte of pc and I do not have good English!
webupdater does not recognize my garmin!
Last edited by marhko; 6th December 2012 at 03:49 PM.
First look if you have your nuvi formated to FAT.
Then create on your nuvi internal memory new folder and rename it to Garmin.
Turn of and then on your nuvi and you will have garmindevice.xml inside (if you have garmindevice.tmp just rename to garmindevice.xml)
Now run webupdater and download all file that you need.
oops.... i made a error...
my garmin nuvi 1250 reoot at logo garmin, so i flash firmware "cure" with garmincure in pre-boot mode, and all right!
i see the disk of garmin, and all files....
but... i click format......... to reinstall cure version in a clean install.... but now, my garmin not boot in pre-boot mode!!!
can you help me?
now garmin stop at garmin logo!
How did you format the flash drive? Windows is likely to format it incorrectly, you should do it with RMPREPUSB as suggested in the first post.
CURE firmware can't boot, it can only enter the mass storage mode. You need to flash the ORIGINAL firmware (click the corresponding check box of GarminCure3 program) in pre-boot mode.
To enter the pre-boot mode:
1)disconnect the device from the PC
2)Hold the power button until the device turns off completely
3)Press and hold the upper left corner of the LCD
4)Connect the device to the PC
5)Wait until updater.exe detects the device
i format in Fat32 whit Garmin name....... and power off garmin!
the problem is now when i Press and hold the upper left corner of the LCD and Connect the device to the PC, no windows sound (DIN DON), and Updater dont' recognize nuvi.... and i see only Garmin logo in nuvi lcd!
oops!
It's not enough to format to FAT32 with Garmin name. I'm serious, FAT32 filesystems are different, and sometimes Garmin devices don't understand FAT32 filesystem. Use RMPREPUSB as suggested here: [Only registered and activated users can see links. ]
GarminCure3 can't break the pre-boot mode on nuvi 12xx, as it doesn't patch boot.bin, so you're doing something wrong.
Try holding the power button for ~30 seconds to turn off the device completely.
Also try pressing the LCD as close to the upper left corner as possible.
all right!
The problem was my usb port in pc.... i shutdown my pc and turn off power cable, restart it, and then i can see garmin internal memory.
So i format with RMPREPUSB, flash original firmware, and now i'm using garmin webupdater for language file....
THANKS!!! :D
p.s.: i hate usb port TilT! :D
ciaoooooo!!!
I did mistake with my 3590EU and internal memory had gone.
With cure3 + formatted as post number 1 is a nice method.
3590 is alive again.
hi sory im new here but in the screnn system sosftware missing but i try to update the software with the updater and say no update are avalible for this product garmin nuvi 205 fw7.60 i have the gcd file and work whit this program
Bookmarks