Nüvi 3790

[Choco]

Hello good afternoon to everyone. I have a nüvi 3790 that I upgraded and screwed up. Of course I didn't backup NV region 41 before updating it. I was able to recover it with Cure-tool but I have lost the usefulness of voice commands. It has also become a 37xx instead of 3790. I have read everything about this topic on the forum, I have done everything I could, but I have not been able to turn my nüvi to 3790 or the voice commands. I have also not been able to transform it into a nüvi 34xx, when the updater connects in preboot mode to flash the 34xx.gcd file, it tells me that they are different HWDI and cannot load it.

Could someone help me recover my nüvi 3790?

It works well, but the truth is that without voice commands it's a pain.

Thanks to everyone beforehand.

Greetings;
Choco

[Neil]

Depends on what you did, as to what should be done to recover that function.

If, as part of recovery using Cure firmware, you subsequently formatted the file system and it then lost Voice Command it might just be lacking some essential files like SRD, ASR & SRX.

If it was a spontaneous loss of function regardless that all files were left in-place then it likely has a severe corruption in the nonvol region due to your updating attempts. My guess is it was that - due to you seeing "37xx" instead of "3790".

So you need to tell us exactly how it happened, i.e. what you did in detail before it needed to be cured, then a course of action can be undertaken. Regardless of the cause, if you haven't already done so please clear the non-volatile memory to see if that changes anything with the loss of model number: [Only registered and activated users can see links. ]

[Choco]

Hello Neil, thank you very much for your response and help.
I tell you:
- I installed an update for my nüvi 3790 from Garmin Express and once it finished successfully, I restarted the nüvi and it did not start, it stayed in a loop, on the Garmin logo screen.

- I read through the forum and applied the Cure, in cure mode with the firmware (37xx_GDCFile_V5.10.gdc). I got the nüvi to connect to the PC in mass storage mode. I then applied the Cure in original mode with the firmware (37xx_GDCFile_V5.10.gdc) and the nüvi booted perfectly.

- From here I began to realize all the things that were not working well or that were no longer available. nüvi 37xx appeared on the home screen instead of nüvi 3790, in utilities\settings\about\ 37xx also appeared and voice commands were no longer in the utilities menu. I also realized that the DEM mapping was not working well, the shadows did not appear. At this point I made a copy of the entire nüvi hard drive on my PC (folders, hidden folders, files...), but I did not make or know how to make the NV backup.

- With the nüvi 37xx running, I started trying cartography from different free sources, since the cartography I had was from 2011, but I didn't find anything that I liked, I finally found the unlocked Garmin City Navigator NTU 2025.10 cartography and the files extras, so I copied it and ran around with it for a while.

- I tried to modify the Sg 34xx firmware along with the original with the RG-tool, crossing regions, creating .rgn files and trying to install them in preboot mode, but the only thing I managed to do was leave the nüvi in a loop.

- I have learned how to copy and write region 41 through the commands copied to an empty sd card.

- Finally, yesterday, I managed, with Catymag's instructions, to transform the nüvi 37xx to 34xx, apply the activation of the extras and load the Garmin logo. During this process it was the only time I deleted non vol memory. The nüvi 34xx works very well, the DEM mapping works well, the 3D and the roadside assistance I don't know, I haven't had the chance to try them yet and I love the user interface. The voice command is not available for any language, (mine is Spanish) I have tried it with all languages and the same message appears (The voice command application is not available for this language). In reference to the GPS of the 34xx, I can tell you that it connects just as fast as with the 37xx, but it is true that the accuracy in meters is not as good, and I don't know why the car jumps, it seems slowed down.


If I could get my nüvi37xx back to 3790 with all its features working it would be fantastic, since for me the nüvi has a lot of sentimental value.
I look forward to your help Neil. Thank you very much for your help.

[Neil]

Then that's confirming my guess that the loss of function is due to the model change from 3790 to 37xx. The device is now performing like the very basic junior model 3700, no ASR etc., so you have the same symptoms as described here: [Only registered and activated users can see links. ].

The best solution if it works is to convert to 3490 in the hope that the device's PCB version doesn't cause accuracy problems and the jumping vehicle symbol, which is exactly what you've found yours does. Therefore you have one of the boards that doesn't play well converting to 3490.

If you convert it back it will not have the inaccuracy and jumping car but will still suffer the function losses consistent with the model change to 37xx. So, after re-converting you could take the (somewhat risky) path of erasing the nonvol memory (ergn,41) which might restore the functionality but make sure you have a good backup of rgn41 after reconverting in case it goes badly. The other thing you could try is converting it back using V4.9 or earlier firmware then applying [Only registered and activated users can see links. ] but that's a guess because i've never tried it on a 37x0 suffering model loss. TuboCCC's patch is reported not to work with V5 or later fw.

[Choco]

Hello Neil, good afternoon. Thanks in advance.
I am clear about converting back into 37xx. Once converted to 37xx, how do I delete the non-volatile memory? From the developer menu?

Thanks again, regards;

[Choco]

[Only registered and activated users can see links. ][/QUOTE]

Hi Neil again. I'm already clear about deleting non-volatile memory, you left the link here.

I'll do the conversion and try. I'll tell you things as soon as I can.

Regards;

[Choco]

Hi Neil, I tried to convert to 37xx and when updater.ex started loading the firmware it stopped and an error appeared on the PC screen. I haven't taken a screenshot and I can't tell you what it said. Afterwards, updater disconnected the USB connection and my nüvi was left with a black screen. By pressing the power button, I appreciate that I can backlight the screen or turn it off, but I haven't been able to do anything else (I don't connect to the pec, I can't put it in preboot.....)

How sad I am, I don't understand what happened. You can help?