Is it possible to restore region 41 in pre-boot mode by using the updater.exe program ?
6th December 2013, 12:42 PM
kunix
You can run update.txt on devices which support it with updater.exe using [Only registered and activated users can see links. Click Here To Register...].
6th December 2013, 01:47 PM
dasilvarsa
What I meant was, Can I make a RGN using Boot.bin and Region 41 (Like we do for logo.bin Region 16)
And then Safely Flash it in pre-boot mode without anything in the SD Card ?
6th December 2013, 02:00 PM
kunix
dasilvarsa, for most devices you can't. Region 41 is almost always protected from flashing using RGN file. boot.bin patch can solve this problem, but manual patching is required, which is sometimes very complicated.
30th December 2013, 09:21 PM
santagps
Hi Kunix,
i made a Webupdater in a Zumo 660 and the unit displays Loader Loading and don't go ahead.
I've tried to press the upper left corner, turn on and connect, but haven't succeed.
I have a Updater.exe and a RGN file from a "software Missing", from the past, but neither work.
Is it possible that one of these Cure files solve the problem?
Thank you very much!
30th December 2013, 09:34 PM
lolypop000
Do you use this file for your unit?
30th December 2013, 10:03 PM
santagps
I don't know. I got a rgn file 292400010470.rgn
How can I know?
30th December 2013, 10:04 PM
santagps
I can't connect the unit to the computer. It keeps running "Loader Loading"
30th December 2013, 10:11 PM
catymag
Zumo has HWID 924, drag your .rgn in rgn tool and look if it is the right one [Only registered and activated users can see links. Click Here To Register...]
30th December 2013, 10:24 PM
santagps
1 Attachment(s)
I dragged my file in the RGN tool and posted attached the results.