Thanks! My Nuvi is back ;)!!!Quote:
Originally Posted by lolypop000 [Only registered and activated users can see links. Click Here To Register...]
Thanks! My Nuvi is back ;)!!!Quote:
Originally Posted by lolypop000 [Only registered and activated users can see links. Click Here To Register...]
Sorry for mi English. I have a problem whith the firmware for nuvi 750.
ID is 754 but dont work whit nuvi 760 firmware!
updater problem is this :
Nuvi 750 Software version 5.4 ID 754 using firmaware from nuvi 760 whit cure3 and original firmware!
updater problem: ( first say updating to 100%)
then.-
the GARMIN device is unable to program the requested memory region.
this could be due to an incompatibility betweenthis aplication and the GARMIN device!
Can you help me ?
This look like your chip is Game over.
Try to restart your Pc and flash again.
Are you sure ? Is the garmin of a friend !
I agree with Loly, the flash chip may well be damaged. But perhaps it is just flaky and will respond eventually so try again and again repeatedly to flash. What are the symptoms with this nuvi when turned on? Does it boot to the logo screen, show a bright white screen, faint light, etc. You can obviously reach pre-boot but what else can you tell us about it's history and what it's doing now? Did it brick after adding a map or other files or a fw upgrade, or for no apparent reason? Are you absolutely certain this unit is HWID is 0754 and not 0785 if it came to you bricked? In pre-boot, you can check the HWID with [Only registered and activated users can see links. Click Here To Register...] if you haven't already confirmed it.
boot on garmin and restar, boot on garmin and restart! I update a photo.
[Only registered and activated users can see links. Click Here To Register...][Only registered and activated users can see links. Click Here To Register...]
IMHO this device is dead, may be Alexander or kunix can have some ideas to revive it.
Try Quick cure too (starting post)
After an update my nuvi doesn't go past the Garmin logo screen when I turn it on and the computer doesn't find it when I conect the GPS to the USB. I want to recover or reset the GPS but I can't. HELP!!!!
I've moved your post to the appropriate thread.Quote:
Originally Posted by biocda [Only registered and activated users can see links. Click Here To Register...]
Another victim of GarminExpress perhaps. If you can boot to the logo, you can reach [Only registered and activated users can see links. Click Here To Register...], or just hold the screen upper LH corner and plug in the usb. If you can reach pre-boot you can almost certainly cure it if the update caused the problem. All the help you need is in this thread so post here further but only if you need to after you grasp the basics.
PS: Sorry for the slow reply, i think we all missed your post elsewhere.
hi,
My nuvi 1240 still in loader loading mode, i tried garmin cure with the 6.20 firmware but when i flash it in cure mode it display an error like this:
App: Updater
At: 9/3/2013 10:06:29 AM (UTC)
OS: Windows XP Service Pack 3
Processor: Pentium Pro or Pentium II, RAM: 523760 KB
IOU_UTILITIES.CPP-203-2.8
App: Updater
At: 9/3/2013 10:07:55 AM (UTC)
OS: Windows XP Service Pack 3
Processor: Pentium Pro or Pentium II, RAM: 523760 KB
IOU_UTILITIES.CPP-203-2.8
App: Updater
At: 9/3/2013 10:10:08 AM (UTC)
OS: Windows XP Service Pack 3
Processor: Pentium Pro or Pentium II, RAM: 523760 KB
IOU_UTILITIES.CPP-203-2.8
App: Updater
At: 9/3/2013 11:00:58 AM (UTC)
OS: Windows XP Service Pack 3
Processor: Pentium Pro or Pentium II, RAM: 523760 KB
IOU_UTILITIES.CPP-203-2.8
App: Updater
At: 9/3/2013 11:15:41 AM (UTC)
OS: Windows XP Service Pack 3
Processor: Pentium Pro or Pentium II, RAM: 523760 KB
IOU_UTILITIES.CPP-203-2.8
App: Updater
At: 9/3/2013 11:17:06 AM (UTC)
OS: Windows XP Service Pack 3
Processor: Pentium Pro or Pentium II, RAM: 523760 KB
IOU_UTILITIES.CPP-203-2.8
App: Updater
At: 9/3/2013 11:25:08 AM (UTC)
OS: Windows XP Service Pack 3
Processor: Pentium Pro or Pentium II, RAM: 523760 KB
IOU_UTILITIES.CPP-203-2.8
App: Updater
At: 9/3/2013 11:26:41 AM (UTC)
OS: Windows XP Service Pack 3
Processor: Pentium Pro or Pentium II, RAM: 523760 KB
IOU_UTILITIES.CPP-203-2.8
the device display only loading and didn't go in mass storage mode.
thanks for the help