When updater.exe window open click on USB in this window and click OK[/QUOTE]
Was able to update the software. After the update the lcd went black and garmin logo came up again.
Switched nuvi off and on again, but still does not load the software, only garmin logo shows. So same problem as before exists.
Also tried suggestion from voyager in #13 and did reinstall same software.
Any other suggestion?
Hmm...that is weird. Maybe you are not doing something correct. Don't care. [Only registered and activated users can see links. ] and put the SD card inside the nuvi and wait till the firmware loads. (...folder Garmin and 14.bin) After the FW loads you will have access to the memory. Delete the problematic files and flash normal firmware.
Tried to start nuvi in 4 different modes
1) no usb, normal start
2) no usb, pre-boot
3) usb, normal start
4) usb, pre-boot = PC recognizes the unit for some seconds
In all 4 cases the screen only shows the garmin logo, nothing else
Shall I forget it and buy a new unit?
This unit is not dead. I think ddabcd277 can help.
Thanks Siam. But I think you can also help the lady.
[Only registered and activated users can see links. ]
Or Alexander2010, who is the developer of this the lets say "ultimate cure". Just genius!!!!
No, there is still a chance. Don't worry. Just someone is needed to prepare you such FW for nuvi 13xx. Be careful as it will delete all files from the memory of the nuvi and you should restore them manual after that.
I forgot after that the memory needs to be formatted after that.
Last edited by ddabcd277; 4th January 2012 at 01:01 PM.