If you have win7 install garmin usb drivers as Administrator
Make updater.exe compatible to win xp sp 3 and then run as Administratior.
Printable View
If you have win7 install garmin usb drivers as Administrator
Make updater.exe compatible to win xp sp 3 and then run as Administratior.
Sorry about the dumb question but which one Updater.exe to get?Quote:
Originally Posted by lolypop000 [Only registered and activated users can see links. Click Here To Register...]
Here you can create cure and original FW and also you have updater.exe inside:
[Only registered and activated users can see links. Click Here To Register...]
I've used exactly the same link (same exe's) without success. The only not tried it is via changing/adding memory card.Quote:
Originally Posted by lolypop000 [Only registered and activated users can see links. Click Here To Register...]
Thank you very much for your effort!
link to Updater thread with usage instructions pics
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
I've succeed to screenshot it while it is visible to the PC :) But the updater said that "No updates found for your device" (or similar to that). Is that means that I did not got right firmware? it is 1350 and used the Cure tool I made .RGN from [Only registered and activated users can see links. Click Here To Register...]
I feel almost lost :(
[Only registered and activated users can see links. Click Here To Register...]
now succeed to screenshot again when it says: "No updates are avaliable for your product" - that time I've tried with [Only registered and activated users can see links. Click Here To Register...]
am 100% sure I miss something
Look at garmindevice.xml if you have 0972 or try with this:
[Only registered and activated users can see links. Click Here To Register...]
lolypop000, catymag, paramas, dasilvarsa, thank you!
Finally I've succeed, no less than 50 times did same and same with all cures and updates - every time I/it fail and suddenly it get to pre-boot every time, nobody knows why... Now the fight continue...
Thanks once again!
P.S. When it pre-boot - all tools work - Cure 3, the Updater and the set from lolypop000 - just everything
Hi, i have the same problem but mine is a 3790 Series and its detected as 34xx series it still the legend system software missing;i also press the corner near the mic(I think is that area for the pre boot) and sometimes it show system ,system,system for a few seconds ,im not sure if this is preboot mode.Quote:
Originally Posted by musketeer [Only registered and activated users can see links. Click Here To Register...]
I deleted gupdated.gcd and *.img maps to try 2gb NV backup when unit works fine and then y I screwed it up .Mine is a 1101 device.Realy Tnx
1101 is HWID from nuvi 3790 if your nuvi show 34xx then you need FW for 34xx and updater will flash.
34xx HWID is 1376
@musketeer
If my set work than you have HWID 0972 ;)