34xx Voice folder
content:
[Only registered and activated users can see links. Click Here To Register...]
download:
[Only registered and activated users can see links. Click Here To Register...]
Printable View
34xx Voice folder
content:
[Only registered and activated users can see links. Click Here To Register...]
download:
[Only registered and activated users can see links. Click Here To Register...]
I did use webupdater to install the voice and installed the american english and select it in the menu but not working.
I download the attachment from last post and deleted the ones from GPS and copied the new ones. Also tested british english
I noticed there is an extra file in the voice folder called "english_america_.sum". Should that file be there?
Thx
The *sum files are only results of checksums, you can safely delete them. The file's name would be english_american_.sum in fact.
If Voices still not working hard reset the unit if you haven't already.
Hard reset did it. Should have started there. Thx
Yep, should have ... that's why it's in the instructions. ;)
Better late than never though. Caty will say typical males. One didn't read the instructions and the other one correctly guessed the first one didn't [probably because he wouldn't have either] ......Quote:
Originally Posted by catymag [Only registered and activated users can see links. Click Here To Register...]
She even put it in red. :lol:
Hi, and thanks for nice detailed instructions.
I have flashed my Nuvi 3790 HWID 1101 from Europe with nuvi34xx_GCDFile__820.rgn via RGN tool,
all was fine and also did backup NV to sd, before flashing.
Now I got problems getting into pre-boot mode Again for flashing logo with 34xx_350_logo_hid1376.rgn,
I try many many times with no luck.
Could it be possible to flash 34xx logo and enable all features via sd Card ?
Thanks in advance.
Hi,Quote:
Originally Posted by Alfiogigio [Only registered and activated users can see links. Click Here To Register...]
you missed probably this in OP:
Go to MTP Settings and set it to Mass storage mode.
Setting it to Storage mode you'll be able to flash the new 34xx logo in preboot mode with updater.
Read at: CURRENT METHOD: Another way to convert 34xx with logo and enable featuresQuote:
Could it be possible to flash 34xx logo and enable all features via sd Card ?
Thanks in advance.
convert37x34.zip (911 KB)
(bottom of the page)
Thanks Catymag, for fast reply as usual.
I have set device to Mass storage mode, after clearing NV several times.
Allready downloaded convert37x34.zip, but I was not sure if this could be done,
after flashing with RGN Tool.
So just to be 100% sure, now I copy all content from convert37x34.zip,
to an empty sd Card and restart device ?
Yes, if you have already flashed 34xx fw it's ok:
Unpack the file to an empty SD card, turn nuvi off, insert card, turn nuvi on.
remove sd.
If you want to go back to 37xx:
flash 37xx sw ,insert the sd and you'll return to original 37xx logo and features.
Then don't forget to run Webupdater to get the latest firmware, reset and select Mass Storage in Dev Menu.
Thanks Again Catymag.
Everything seems to be working fine now, logo and all features are enabled.
Satellites reception accuracy is Down to 4 meters (was worried about that).
I wish you and all others here, a happy Newyear.