nuvi 24x5 and 25x5 software versions summary

Printable View

Show 40 post(s) from this thread on one page

9th February 2013, 11:30 PM
Giomen

I not have a problem with 7.70 SW on 2595LMT. Use Suomi map with Suomi ASR...
9th February 2013, 11:42 PM
Roger

Quote:

Originally Posted by Neil [Only registered and activated users can see links. Click Here To Register...]

Can you do more tests with your 2595 using other languages and report? Maybe other users could check their units using 7.70 too.

Report from my 2595: is OK the function Find place>>>Italian Language (Trova indirizzo)

I had the same problem after map update 2013.20 and 2013.30 CNNTUEU
With EU 2013.10 (the original) works fine.
I've tried everything with the 2013.20 and I could not
2013.10 reinstalling all working properly.
Even with the 2013.30 did not work initially.
After several tests, I could re-installing the firmware 7.60 (the release was in use then) from the SD and even completely reinstalling all the files from the Garmin Web Updater always TEXT.
To be honest I do not know which of the two procedures has allowed the proper functioning of ASR ..... even now with the 770 everything is working correctly.

Bye,bye
10th February 2013, 01:51 PM
samurri

Thank to all. So:

Quote:

Originally Posted by Neil [Only registered and activated users can see links. Click Here To Register...]

Is it only happening in Dutch, or in EN and other languages also? If confirmed to only one language there is no need for others to downgrade but you should report the bug to Garmin in any case. The only ASR capable 24/25xx device i have is a 2460 (AU only device) which uses ASR-1 like a 3790 and has 'Find by Name' instead of 'Find Place'. My only ASR-2 devices are 3490 and 3590 and 'Find Place' works in them, but again that's also a different fw of course. Can you do more tests with your 2595 using other languages and report? Maybe other users could check their units using 7.70 too.

I am italian and i've this crash with this language with SW 7.70 and 2013.30 on my 2595LMT. The video shows the same problem but in another language.

Quote:

Originally Posted by Giomen [Only registered and activated users can see links. Click Here To Register...]

I not have a problem with 7.70 SW on 2595LMT. Use Suomi map with Suomi ASR...

Why suomi map? My map is City Navigator Europe NTU 2013.30. i don't understand why I should use the suomi map

Quote:

Originally Posted by roger1109 [Only registered and activated users can see links. Click Here To Register...]

Report from my 2595: is OK the function Find place>>>Italian Language (Trova indirizzo)

I had the same problem after map update 2013.20 and 2013.30 CNNTUEU
With EU 2013.10 (the original) works fine.
I've tried everything with the 2013.20 and I could not
2013.10 reinstalling all working properly.
Even with the 2013.30 did not work initially.
After several tests, I could re-installing the firmware 7.60 (the release was in use then) from the SD and even completely reinstalling all the files from the Garmin Web Updater always TEXT.
To be honest I do not know which of the two procedures has allowed the proper functioning of ASR ..... even now with the 770 everything is working correctly.

Bye,bye

This bug is on the function: "find place" that in italian language is "trova località". "find address" ("trova indirizzo") is ok .
I solve this bug with a downgrade to SW 7.60. With your steps i have not resolved the problem. Now I'm uploading ALL updates available through webupdater, including all voices...
10th February 2013, 08:14 PM
Roger

Quote:

Originally Posted by samurri [Only registered and activated users can see links. Click Here To Register...]

Why suomi map? My map is City Navigator Europe NTU 2013.30. i don't understand why I should use the suomi map....

Perhaps the Giomen (Hi ..) meant that using ASR for the nation SUOMI with its voice, everything is working correctly.

Is well known that the ASR Garmin work only in a single state ... and NOT inter-state. If you have to go from Rome to Paris, you will not find any address in the Ville Lumiere, but you'll have to do it in French and in fact setting the nation France just walk the line

Sorry for translate from Italian:

Quote:

Forse il Giomen (HI...) intendeva dire che usando gli ASR per la nazione SUOMI con la relativa voce,funziona tutto correttamente.

E' noto infatti che gli ASR Garmin funzionano solo in uno Stato singolo...e NON inter-stato. Se devi andare da Roma a Parigi,non ti troverà alcun indirizzo nella Ville Lumiere, ma dovrai farlo in francese e settando appunto la nazione Francia appena passi il confine

Bye,bye [International....;) ]
10th February 2013, 11:02 PM
Giomen

Quote:

Originally Posted by samurri [Only registered and activated users can see links. Click Here To Register...]

Why suomi map? My map is City Navigator Europe NTU 2013.30. i don't understand why I should use the suomi map

It is only sign that you have problem for your locale and device. In my country and on my device the City Navigator Europe NTU 2013.30 worked correctly.
11th February 2013, 06:44 PM
samurri

ok, I understand now. Possible solutions to my problem? I installed everything that is available, but the problem remains

EDIT: I noticed this thing: after a master reset with erase all user data and all fully updated, the device in indoor position, the indicator is in Rome. Then I launched the procedure of voice command and I found it to work perfectly!. Then I decided to try it outdoor, with the GPS on and I could see that the problem returns as documented. Now please explain to me why this behavior with activation of GPS and tracking satellites in my area?

Code:

RTL Trap 0X6e5d8017 in �� Basic Shutdown Information: Error Type: RTL Trap Product: nüvi 2595 Software Part Number: 006-B1371-00 Software Version: Software Version 7.70 Hardware Version: nuvi 25x5 C2p2 A V5 8GB 128MB S TE UTC Offset: +1 Error Date: 02-10-13 Error Time: 01:28:56 PM Boot Date: 02-10-13 Boot Time: 01:28:11 PM Uptime: 00:00:46 Shutdown number: 12 Lat/Lon: N 00.00000°E000.00000° Error Number: 6E5D8017 General Registers: R0 : 0x030B40D0 - R8 : 0x00000000 R1 : 0x006D571C - R9 : 0x00000000 R2 : 0x0000012E - R10: 0x00000000 R3 : 0x006D56E4 - R11: 0x00000000 R4 : 0x00000003 - R12: 0x00000000 R5 : 0x04326088 - R13: 0x00000000 R6 : 0x0434561C - R14: 0x00000000 R7 : 0x00000000 - R15: 0x00000000 RTL Information Line: gpk\ASR\core\asr_engine.c 302, Critical ASR error: Code: 003 Message: An invalid argument was passed to a function. Details: pUserIds RTL Message: 牃瑩捩污䄠剓攠牲牯›潃敤›〥搳䴠獥慳 Call Stack: Func Addr : Offset : Name 0x0009EB40 : 0x001D : �� 0x002484F8 : 0x0091 : �� 0x006D5314 : 0x002F : �� Task ID: ASR apps Remaining Stack Space: 9848 Symbols Key: 0x770 Symbols Status: Stack trace incomplete
12th February 2013, 05:28 PM
Mapperoni

I have no problem with Dutch voice commands on my 2595LMT (firmware v7.70) and City Navigator Europe NTU 2013.30.
Although my 2595 doesn't shut down it's only possible to search in the Netherlands when speaking Dutch, in Italy when speaking Italian etc (as roger1109 stated). You probably are aware of this inconvenience.
12th February 2013, 06:23 PM
x-trail

@ samurri

Did you try a master reset using "clear Nonvol"???
12th February 2013, 10:06 PM
samurri

yes, I tried it now, without success
12th February 2013, 10:12 PM
lolypop000

25x5 update for FW is always in the same time that for 34xx and 35xx.
25x5 have update to FW 7.70 but 3xxx dont becouse FW problems.
Downgrade to FW 7.60 and wait for new update where all problems will be removed ;)

Show 40 post(s) from this thread on one page