If someone want to add region 139 from original nuvi 3490 to flashed 37xx to 34xx.
FML P/N from the info screen - Region 139
If someone want to add region 139 from original nuvi 3490 to flashed 37xx to 34xx.
i have a problem i cant find my .system after a reset it and i was trying to use xyplorer and it dont see my Garmin
and my other question can i restore all my saved locations?
what should it be on mass starage or mass storage single session
got it too work now
how to you restore all your location?
With mapsource or if you rename current.gpx from your backup to current1.gpx and add in your nuvi in folder GPX and restart nuvi.
I'm struggling to understand the traffic trends after the 3490 conversion.
I'm of the understanding that part of the trend files is now stored in the SID folder (The G2S folder no longer being required). If that is the case, why do we still need the DB file (D317400.db) in the SQLite folder. Note, I tried deleting this file and lost the traffic trends on the installed maps section.
The confusion gets worse as D317400.db does not seem to be bundles with 2012.40 Unicode which I believe the 3490 uses?
Originally Posted by [B]Kanopus
For a specific reason I'm trying flashing my 3790 (v5.00fw) to 3490 (v7.80fw), but with the original boot.ini of 3790, or with original boot.ini hwid 1101 or modified to 1376.
At the post of Aekong would be possible, but I tested this and other alternatives and did not work. I've made several attempts and none successfully.
With the original boot.ini of 3790 (hwid 1101) and fw_all to 1101 of 3490, was the worst, black screen, no signal. With the boot.ini of 3790 with hwid mod to 1376 + 3490 fw_all original, gets locked in the Garmin Logo (probably logo of 3790) and appears “software missing”.
My question: is possible to delete the logo Garmin of 3790 and immediately flashing to 3490 (with any fw) in reboot? If the Logo seems to be the problem, deleting it previously, in any circumstance, the gps can boot if the remainder fw file is ok? and If the flashing is feasible with older firmware, as of the time the tests that Aekong did, would it be viable a old boot.ini of 3790 with modern fw_all of 3490, both with hwid mod to 1376?
Last edited by angelozip; 3rd April 2013 at 02:29 AM.
DriveLuxe50, Nuvi 2689, Etrex 30x, Epix, VivoActive HR.
I think logo is not a cause of problem.
(Why didnt you flash with original 34xx fw? )
Bookmarks