Printable View
LMT doesn't matter on the firmware and it has no connection with the cameras alert. Cameras are in the folder POI in a separate files.Quote:
Originally Posted by mariusmssj [Only registered and activated users can see links. Click Here To Register...]
Ask someone in the Maps or POI section to upload his cameras from his nuvi or to help you with the camers. Best are the Cyclops. :)
[Only registered and activated users can see links. Click Here To Register...]
Through this procedure I have revived my Garmin nuvi 510, thanks for the help
Thank you very much for this instruction. Today, the reformed its 1410
Thanks for the guide! Helped me restore my 205w HWID 1091 when I installed 465 firmware meant for 0827!
Question when you have cured a device and it's being recognised by ccomputer can garmin Web updater be used to flash over the cure firmware?
When you use cure FW and you have mass storage access you must flash in pre boot also with original FW created with cure tool.
Webupdater can't overflash cure FW so you must flash in pre boot with original FW, if you don't do this, your nuvi will stuck on Garmin logo.
I'm stuck.... I got the cure to work, and my gps (Nuvi 255w) starts up... only problem is it doesn't appear to be able to read .img files (maps won't load; "no detailed maps found...."). So, I tried to update to official firmware, and no Garmin software worked for updating. Then I downloaded the software for my gps, from this website, and tried to use the updater method to flash it (going into preboot mode, installing it), and all's that got me is my gps being unable to load and being stuck in a boot loop again, so consequently I had to flash back to the cure. So now I'm sort of stuck with the cure firmware, which is able to start up and everything, but unable to read maps, so it's basically useless..... suggestions? Any help would be most appreciated :) :) :)
Normal it doesnt see .img
Cure doesnt see the corrupted files (.img .GCD .gpx .gpi .zip .vpm)Quote:
We have to change some values related to some extensions (.img .GCD .gpx .gpi .zip .vpm)
Why ? Coz one of these files prevents our nuvi to boot normally , changing the extension the firmware wont find the corrupted one anymore and will boot.
Remove the corrupted files who prevented your nuvi to boot, remove any gupdate,gcd in nuvi and then reflash original firmware with Updater.exe in preboot mode. Be sure to use the right one for your HWID.
At the end run Webupdater
Hi,
anyone have Zumo 550 ATL BMW 2.50 FW?
If you enter your question in google you will already have this FW.
Code:http://www8.garmin.com/support/download_details.jsp?id=3903
Code:http://www.garmin.com/software/ZumoBMW_WebUpdater__250.gcd
