-
1) Install mapsource and go to utilities, from the menu select “get unit ID”
2) Copy unit ID into JM keygen where it says enter unit ID
3) Select “custom mapset” from the map menu and put your map ID in, then press generate to get your key
4) Now open unlock wizard which can be found under “start/ programs” and follow the instructions
5) To check to see if your unit is unlocked go to utilities and select “manage map products”, then select unlock region tab, if you’ve done everything correct you will see your device next to the map you just unlocked
6) Now just transfer your maps to your device and your done
-
Hello catymag, i've followed that list and mapsource says 2010 maps are locked, under 'unlock regions' it says map product not installed ? i've tried it several times and i'm getting the same results. Do i need to try a different version of mapsource (using V.6.15.6) ?
-
Thank you for map. it's working. On Nokia Navigator with Garmin Mobile XT lane asist and 3D are working?
-
these files work only on Nuvi 7x5/8x5 Devices
-
Thanks alot catymag, it's working on E71.....Happy days.
-
Works like charm! Great.
Tested with zumo 500 de luxe and last version of mapsource
-
Can this work on garmin 205w ?
-
Sure, works on all newer Nuvis
-
Thanks, a nice exercise. Howerer, seems that I've a glitch somewhere: the maps unlock fine on MapSource (ver. 6.13), all details are visible, but when I try to transfer them to the StreetPilot 2610, I get the message "maps are locked'. As far as I know, I followed the instructions to the letter. How to approach the problem?
-
Sorry, guys!
the maps will have to be unlocked _on_the_device_, unlocking them on the MapSource is not enough.
Works perfectly now, thanks!
