Roads of Belarus up to v.5.40 - KartaBy.By

Quote:

---

Originally Posted by Neil [Only registered and activated users can see links. Click Here To Register...]

Maybe i'm misunderstanding that. Have you modded that 760 to use a 3D img file Giomen, or do you mean 765?

---

I did not say what I can see 3D but 2D footprint is perfect on screen :) So it was mentioned what I use gmapsupp.img with 3D footprint support (Dorogi Belarusi ver5.40 3D KartaBy.by) only and address search worked on this map. I did not test 2D version...

A very interesting experiment.
Have v5.40 (2d or 3d) on nuvi 710 with or without additional cards is the same (may be it is necessary to disconnect a map of Russia, I don't had it).
Tap "Tools - Settings - Restore".
Tap "Where to? - Adress" and get the screen "Select City in: - empty string - Spell City" and so on.
Tap "Spell City" and see what address search is working !!!
But if we tap "Change Country" and select Беларусь we get the screen "Select City in: - Беларусь - Spell City" and so on and address search became broken.
In oder to get a working address search we must to restore settings again.
This was not with maps v5.30.

Quote:

---

Originally Posted by Giomen [Only registered and activated users can see links. Click Here To Register...]

I did not say what I can see 3D but 2D footprint is perfect on screen :) So it was mentioned what I use gmapsupp.img with 3D footprint support (Dorogi Belarusi ver5.40 3D KartaBy.by) only and address search worked on this map. I did not test 2D version...

---

Thanks for the explanation, now makes sense but you saying '3d img works fine on my nuvi 760' made no sense to me as it seemed 3d img meant gmap3d.img and not the footprint in the detail map.

@victor777
I see you have 710. This is OT but if you want to enable TTS voices flash this modded logo:

Spoiler:

[Only registered and activated users can see links. Click Here To Register...]

Checksum has been calculated so will show pass in inventory. More info: [Only registered and activated users can see links. Click Here To Register...].

NOTE: The above attached file is named logo.bin. If you decide to use the SD pack in the 710 TTS thread linked above please note that the update.txt file refers to 16.bin, so either change logo.bin file name to 16.bin, or in Update.txt change 'xrgn,16,1:/16.bin' to 'xrgn,16,1:/logo.bin'. Thx to sbog for pointing that out to me by PM.

You can of course also flash it as i intended here, as an RGN file using Updater.exe in pre-boot mode. To make an rgn file combine logo.bin with boot.bin from 5.40 firmware using RGN_Tool. In that case name the file 075401000540.rgn and then the original naming of the source BIN files is quite immaterial.