What kind of map is this? What is its FID?Quote:
Originally Posted by guyinnrw [Only registered and activated users can see links. Click Here To Register...]
Printable View
What kind of map is this? What is its FID?Quote:
Originally Posted by guyinnrw [Only registered and activated users can see links. Click Here To Register...]
@Cnfhbr
I think he has zūmo 340LM CE which comes with a subset of this NTU map, Zentral Europa i.e. Central Europe [CE]:
@guyinnrwCode:https://buy.garmin.com/de-DE/DE/strassennavigation/zweirader/zumo-340lm-ce/prod115830.html
It will use the nuvi 3xxx series split screen JCV D3048160A.JCV. If you don't want to use ASR then don't bother loading those files, but if you want them i think you'll need the ASR2 files from Post #89. I'm not familiar with zumo 3x0, but if i've guessed correctly about it using ASR2 for voice command then it will also use 34xx .db and .sid additional files. If it uses ASR1 [Posts #86 & 88] then it'll use the 37xx G2S instead.
Thanks, but I'm more interested in the FID of this map.Quote:
Originally Posted by Neil [Only registered and activated users can see links. Click Here To Register...]
Oh, alright then. If it is a subset of this NTU if should have the same FID, from Post #1:Quote:
Originally Posted by Cnfhbr [Only registered and activated users can see links. Click Here To Register...]
@guyinnrwQuote:
Originally Posted by monterra [Only registered and activated users can see links. Click Here To Register...]
Could you kindly check the FID of your Central EU map with [Only registered and activated users can see links. Click Here To Register...] or [Only registered and activated users can see links. Click Here To Register...] and confirm if it's 3466 please?
confirmed, GMAPTOOL shows FID 3466 for built-in central europe map
Two maps (CE and ALL) with the same FID will not work properly together.Quote:
Originally Posted by guyinnrw [Only registered and activated users can see links. Click Here To Register...]
In this case, the map that was loaded first will work only.
yes, this seemed to have been the Problem - fortunately it is solved - original map removed from .sys folder, the other remains on SD Card and it works - you are great experts here in this forum :-))
about my JCV file - as stated by Neil - i assume i will need to remove the built-in files and load the new JCV file into the .sys folder, right ?
anything else which Needs to be loaded into .sys ? just to be sure ...
For paths in internal memory look at garmindevice.xml, you'll find there where to put all the needed and supported files.
For paths in sd check here
[Only registered and activated users can see links. Click Here To Register...]
Addition files are version dependent, remove old ones and replace with new. (don't forget to backup old files to pc)
Quote:
Originally Posted by guyinnrw [Only registered and activated users can see links. Click Here To Register...]
Ah! Now I understand your interest in the CE map's FID Cnfhbr. Sorry for being a little dense [it was late at night and post wine o'clock ;)]. Just so i'm clear on this though, is it more correct to say that the gma/unl files for the legitimate map will interfere with the working of the unofficial/unlocked map of the same FID rather than literally 'the map that was loaded first will work only'?Quote:
Originally Posted by Cnfhbr [Only registered and activated users can see links. Click Here To Register...]
If for instance both maps were the same FID and either (i) both official with correct/same gma & unl codes for the unit; or (ii) both unlocked; then in either case both maps will work regardless of any repeated [identical] map tiles?
@Neil
I believe that the unl/gma files are innocent at all in this case.