Are some additional files regional And for 2xx5,34/35xx,Dezl,ecc...seriesCode:Please Login or Register to see the links
The D3427090A.sid however, is identical to that of the map FULL and already in the starting post
Last edited by Roger; 6th September 2013 at 12:20 PM.
Is 37xx SQlite .DB file still missing?
Last edited by Genius3; 8th September 2013 at 02:52 AM. Reason: add PIC
My nuvi is always updated with the latest firmware, so that's not the issue. I've re-installed the latest firmware without a solution to my problem. I know that CNEUNT is better for 7x5 but I wanted to try this one, that's why I installed it. Thank You for the advices.
FYI - nüvi 765T reads 16 GB SD card. I've been using that card for a couple of years now. About so many img's - there is not enough space on the nuvi drive to have it all there and my 765 can't read >2GB files from SD card for some reasons, even though it has updated firmware. Plus I can then swap SD card from one nuvi to the other without probs.
I know everything there is to know about naming and placing IMG's, so I have read those guides, but thank You for the links I'm not a newbie in this, You know. And as I said to @Roger, I loaded CNEUNTU in 765 with purpose of testing it to see how it works on it. If I brick it, that's me headache, not yours, but thank You for the warnings.
I hear You, but I'm very carefull with creating IMG's knowing of the issue with overlapping charts in different IMG's from the same distrubution (CNEUNT(U)), so there are none overlapping charts. And Yes, I've tried to see the real map, and there are just fine. I can even route from Denmark to Serbia without any problem. Even using address search.
Thank You for all your help. Although none of Your advise worked for me. I solved this issue on my own. Problem was in the SD card and how the PC saw it. When it was in my nuvi and connected to the PC, SD card was recognised as FAT16 formatted. When I took the SD card out of the nuvi and put it directly in PC, it was recognised as FAT32. Then I put it back in nuvi, and it was recognised as RAW file system. I went then in computer administration and from there I formatted it as FAT32 with 4096b allocation sectors. now it's recognised as FAT32, no matter where I put it. After that, there were no problems with reading >2GB files from the SD card.
Don't threat everybody as a newbie just because of low amount of the posts. Be more respectfull and concetrate on being helpful, not correctional. We all live in the era of information and time is knowledge. Why should I read tons of useless information before I find the answer I need? Why couldn't I politely ask the question and You would politely answer to it for 1.000.000th time? Or anybody else for that matter. I know, that all of You are here to help, and I'm not picking on any of You particularly, but from reading the topics, I feel like some of You have forgotten that. And stop saying Google it, cause it's not perfect either and sometimes it doen't have answers although You search for something specific. Sorry I took your precious time, I wouldn't bother You any more with this issue.
posted in GPS section Announcements.Before posting in Garmin sections take a look at the following threads ,to avoid to ask for already replied questions
[Only registered and activated users can see links. ] here you probably will find the solutions to your problems and you wont waste your time
[Only registered and activated users can see links. ] all the recent maps posted
[Only registered and activated users can see links. ] all the software you can need
Like you guessed, helpful members are tired to repeat the same words in every threads. We have Tutorial index just for that, users can get infos without wasting their and our time, fast and efficient way.
Probably you haven't clicked at links Neil gave you.
Why we thought you may be new to Garmin:
Then there's this:
There are later and faster image unlockers, although FIU still works. But YES, you did need to do that because unlocking in MS only allows the gmap folder to be used in MS and a generated image is still 'unauthenticated' in the unit because of GMA protection: [Only registered and activated users can see links. ].For the record, all the maps are unlocked with Fast IMG Unlocker 2.10, even though I don't need to do that (keys are typed in MS).
You admitted you were lost and asked for help. You got it, in individual replies and links to relevant threads. Your problem was somehow self-inflicted, you had an incorrectly formatted 16GB SD. It was reformatted somehow [it's factory format is FAT32]. You now claim 'PROBLEM SOLVED' and hint that all our advice was to no avail: 'none of Your advise worked for me. I solved this issue on my own'. Good on you, but why you want to then lecture us and to rub it in our faces that you'd solved your own problem is beyond me as the answer was only one possibility and we can't be psychic.Does anybody experienced this before or have any idea, what is going on and how to solve it?
As for you not being treated politely, [a] i don't agree, and [b] even if it were true 'it's the pot calling the kettle black'. [Only registered and activated users can see links. ] was hardly the epitome of politeness.
Sorry that you wasted your time. You should get your money back .... oh! Wait .....
Some thread cleaning needed soon ......
'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
[Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].