Garmin Map of Ireland Emerald island topo up to v.2.04
Garmin Map of Ireland Emerald island topo Version 1.94 (2009/07/28)
Few things to know about the map
This topographic map represents Ireland. It is designed for "hillwalking". The contour lines are extracted from SRTM public data provided by NASA. These files contain a digitized ground represented by points. The sample rate defines a grid resolution for Ireland around 90m in northing and 60m in easting. In major cases, digitized points do not correspond with summits. Carrauntoohil (1039m, the highest summit of Ireland) does not appear in SRTM data. The altitude reaches only 1018m.
Data were obtain from space with a radar. Because of the relative position between the radar and the earth, a shadow appears in some conditions (along ridges, behind summits...). This shadow matches with a gap in data (Imagine you with a flashlight in a dark room. It is hard to see what is in shadow). To close these gaps, you need other data or you can do interpolation. The second solution is applied in our case. There is one square degree per SRTM file with a sample rate of 1200x1200 points/square degree at Ireland latitude.
For smoother contour lines, oversampling with interpolation can help. This process is like erosion on mountains and it depends on what kind of interpolation is involved.
All in all you obtain contour lines pretty sufficient for walking.
Remember this : a map is not the ground, it is an abstraction which helps to define the place where you are.
Because of the nature even of the irish mountains and fast change of the weather conditions, hillwalking presents risks. Leave equipped, protect nature by keeping your waste, respect private properties.
A GPS receiver is only a secondary means for navigation. Map and compass remain necessary.
The author of the map ''Ireland'' declines any responsibility in the event of injury or worse, for any damage on your GPS and lost data.
This map was carried out with the authorization of use of MountainViews for summits data and The Scottish Mountaineering Club for other toponyms. Contour lines are built from SRTM data provided by NASA. Data for lakes, rivers, roads, urban areas come from OpenStreetMap.
INSTALLATION & USE
To install the map, launch the setup program and follow the instructions. The Map will be available into your Mapsource product.
To upload the map in your GPS, use sendmap or a Mapsource product. To adjust level of details, do it in the maps menu on your GPS.
The map is made with many layers. Some of them are transparent ad can be displayed with Mapsource products. To display them or not, adjust your map settings in GPS menu.
Levels of details are tuned for "normal" setting. To display more details, adjust your map settings in GPS menu.
Mapsource [Only registered and activated users can see links. ]
IMG [Only registered and activated users can see links. ]
irelandmap+topo+v1.92 [Only registered and activated users can see links. ]
Release 2.0.4 to post #17
Last edited by Roger; 6th May 2013 at 01:10 PM.
Reason: add info n° post for new release
You have to navigate to get to the good.
[Only registered and activated users can see links. ] Password for my files: gpspower.net Galaxy S5 Kitkat 4.4.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / Nuvi 66 / Oregon 600
The map called "Ireland Map" is made of 6 layers :
* Ireland TOP: contour lines, summits and toponyms (transparent layer).
* Ireland DEM : coloured elevation background (partially transparent layer).
* Ireland BGD : non transparent background layer (mask basic map, useful if OSM layer is hidden).
* Ireland OSM : lakes, rivers, roads and urban areas (transparent layer).
* Ireland MGL : megalithic sites (transparent layer).
* Ireland PIL : triangulation pillars (transparent layer).
What's new ?
* OpenStreetMap layer updated (2010/08/21)
* MountainViews layer updated (2010/08/21)
* Wetland style changed
* Route elevation profile enabled in Mapsource (same as tracks !)
Nota : because of the non-stop data growth, OSM layer is now sliced in 2 parts
Known issues :
* For faster display, disable DEM layer
* Probably hidden bug with routing
* Piers rendered like roundabouts :-(
* slow display while OSM data are increasing
The links for the actual current version v2.02 works (the post before your own) and it's the same links as the official site.
If you write about link problems you should of course also give information about which links you're referring to. In this case it's natural to think that you write about the links in post #9 (the post before your own that you have given a Like credit) but they work 100%.