If you are sure that 0972 was HWID before you flashed the cure, then you need to remake the cure firmware and flash it again. 'System Software Missing' message can sometimes mean an incorrect firmware has been flashed.
ok..sorry Neil..my garmin 1490 has HWID 0972
If you are sure that 0972 was HWID before you flashed the cure, then you need to remake the cure firmware and flash it again. 'System Software Missing' message can sometimes mean an incorrect firmware has been flashed.
'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
[Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].
ok how shall I proceed further?
Probably you flashed wrong HWID cure, the only option you have now is to flash it with the right HWID cure and see if it works.
You have to navigate to get to the good.
Galaxy S5 Kitkat 4.4.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / Nuvi 66 / Oregon 600
and how to flash with the right HWID cure?whre can i find this right HWID?
(i) Connect it again in preboot to G7ToWin to check the HWID presently displayed by the unit which you've said is 0972 [it would be reported as 'ID: 972' by G7ToWin].
(ii) Look at a backup for your 1490 to find GarminDevice.xml in 'Garmin' folder. Directions are at the base of G7ToWin initial post and at the start of the other thread linked in P#4. It doesn't matter how old the backup is.
Both those HWIDs should be 972/0972. If a GarminDevice.xml shows 1104 to be the unit's original HWID then clearly you've flashed 0972 cure fw to a unit which is physically 1104 hardware and it's now maybe hard-bricked.
So, if you have flashed the WRONG cure firmware, and the unit now shows an incorrect HWID in G7ToWin for its physical hardware i.e. 0972 when it should be 1104, that entirely accounts for the 'System Software Missing' message now displayed when previously it was only stuck on the Garmin Logo screen. To help you clearly we need to know if that has happened or not. We also do need to know how you NAMED the cure RGN file before you flashed it.
'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
[Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].
Bookmarks